Mariseal Aqua Primer is a transparent, two-component, water-based epoxy primer. It is used on non-absorbent surfaces, such as glass and building materials, as a primer for waterproofing, sealing, and floor coating. Apply with a roller or brush after mixing the components and diluting with clean water.
The surface must be clean and defect-free, with a moisture content of up to 7%. For application and curing, the temperature must be between 5 °C and 35 °C. The next polyurethane coating or polyurethane joint sealant should be applied after approximately 6–12 hours and no later than 24 hours, while the primer remains slightly tacky.
- Type: Two-component, water-based epoxy primer
- Appearance: Transparent
- Suitable surfaces: Glass and building materials
- Uses: Waterproofing, sealing, and floor coating on non-absorbent surfaces
- Application: With a roller or brush
- Dilution: 15–25% clean water
- Mixing: With a mechanical mixer for approximately 3–5 minutes
- Maximum surface moisture: 7%
- Substrate compressive strength: At least 25 MPa
- Substrate bond strength: At least 1.5 MPa
- Application and curing temperature: 5–35 °C
- Time before applying the next coat: Approximately 6–12 hours, no later than 24 hours
- Application surfaces: Interior and exterior
- Weight: 4 kg
Specifications
- Genre
- Primer
- Surface Material
- Glass, Construction Materials
- Surfaces
- Multiprimer
- Properties
- Epoxy, Water
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.