Description
Specifications
Sika Primer-3 N primer improves the adhesion of Sikaflex, Sikasil, SikaHyflex and SikaBond sealants and adhesives to porous and non-porous substrates. It is a one-component, solvent-based epoxy resin suitable for construction materials and metal, and provides water-repellent properties.
Apply one coat with a roller or brush. It dries quickly. The application temperature is 5 °C to 40 °C, at least 3 °C above the dew point.
- Type: Primer
- Suitable for: Construction materials and metal
- Properties: Solvent-based, water-repellent
- Composition: One-component epoxy resin
- Application: One coat applied with a roller or brush
- Porous substrates: Cement, concrete, bricks, masonry and stone
- Drying time: At least 30 minutes and up to 8 hours
- Application temperature: 5 °C to 40 °C, at least 3 °C above the dew point
- Density: Approximately 1.00 kg/l (ISO 2811-1)
- Solids content: Approximately 34%
- Viscosity: Approximately 10 mPa*s (ISO 3219)
- Coverage per litre: 5–8 m² or 250–400 m, depending on substrate porosity
- Areas of use: Interior and exterior
- Volume: 0.25 lt
- Standard: UN1866
- Product Number
- 114665
Specifications
- Genre
- Primer
- Surface Material
- Construction Materials, Metal
- Surfaces
- Multiprimer
- Properties
- Solvent-Base
Quantity
- Mass Gaining
- 0.25 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.