Powerful anti-corrosive substrate for metallic surfaces of new technology without the addition of lead oxide. It offers long-term protection to the metal due to the strong new generation anti-corrosive additives it contains and strong adhesion to ferrous surfaces. It dries quickly, has excellent workability, and coverage ability.

• The surface must be dry, clean, and free from dust, grease, and other residues.
• Sand the surface with appropriate sandpaper in case of old rust.
• Degrease the surface using KRAFT BRUSH SOLVENT.
• On new metallic surfaces: apply 1-2 layers of KRAFT MINIO and lightly sand after at least 16 hours.
• On painted metallic surfaces: remove all residues of flaky paints and apply 1-2 layers of KRAFT MINIO.
• After 16 h, lightly sand and apply 2 layers of the suitable final varnish paint from KRAFT.

• Thin the paint by adding up to 5% by volume KRAFT BRUSH SOLVENT if necessary.
• Suitable painting tools: brush, roller, or airless spray gun.
• Apply 1-2 layers of KRAFT MINIO for an ideal result.
• Then apply 2 layers of the final color from KRAFT.
• To be applied only in open or well-ventilated spaces.
• Minimum recoat time 16 hours.
• Surface drying in 1-2 hours at 25°C and 50% relative humidity.
• Do not apply at temperatures below 5°C and above 35°C.
• Do not apply at relative humidity over 65%.

• Clean the tools immediately after use with BRUSH SOLVENT and then with warm water and soap.
• Seal the container well for future use and store it in a cool place away from exposure to sun or frost.