Description
Specifications
Vivechrom Plastikon Primer is a water-based primer for plastic paints on masonry, suitable for indoor and outdoor use. It improves the adhesion and durability of the finish coat, withstands alkaline surfaces, and creates a uniform matt base.
Dilute with clean water at a ratio of 200–300% and apply with a roller or brush. Coverage is approximately 15 m²/lt per coat. It is touch-dry in approximately 2 hours and can be recoated after 3 hours. Apply and allow to dry at temperatures of 10–35 °C, with good ventilation.
- Type: Primer
- Surface material: Masonry
- Base: Water-based
- Use: Indoor and outdoor
- Colour: White
- Properties: Good adhesion, hardness and elasticity
- Resistance: Suitable for alkaline surfaces
- Finish: Matt base
- Dilution: 200–300% with clean water
- Application: Apply one coat with a roller or brush
- Coverage: Approximately 15 m²/lt per coat
- Touch-dry: Approximately 2 hours
- Recoating: After 3 hours
- Application and drying temperature: 10–35 °C
- Volatile organic compounds: Up to 3 g/l (EU limit 30 g/l)
- Specific gravity: 1.11 g/cm³ (ISO 2811)
- Volume: 0.75 lt
- Tool cleaning: Immediately after use, with water and detergent
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Water
Quantity
- Mass Gaining
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.