Isomat Block Primer acrylic primer isolates water-soluble contaminants in the substrate, preventing them from showing through the final coat of paint. Suitable for interior and exterior masonry to be painted with emulsion or acrylic paints, where the surface has been affected by smoke, nicotine, exhaust fumes, pencil marks or water-soluble markers.
Apply with a roller, brush or airless spray gun in one or two coats, depending on how dirty the surface is. For heavy contamination, apply undiluted. Clean tools immediately after use with water and detergent.
- Type: Water-based acrylic primer
- Substrate: Masonry
- Use: Interior and exterior surfaces
- Suitable for: Emulsion and acrylic paints
- Contaminants: Smoke, nicotine, exhaust fumes, pencil marks and water-soluble markers
- Colour: White
- Dilution: Up to 10% with clean water
- Coverage: 11–16 m²/l per coat
- Touch-dry time: 1 hour
- Recoating time: 2.5 hours
- Waiting time before applying paint for better stain blocking: 24 hours
- Application and drying temperature: +10°C to +35°C
- VOC content: Up to 30 g/l
- Volume: 3 l
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Acrylic, Water
Quantity
- Mass Gaining
- 3 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.