ULTRALAC AQUA is an ecological water-based varnish suitable for internal and external wood or metal surfaces.

It is easy to work with and spreads evenly on the surface. It is characterized by fast drying, economical application, and it is practically odorless.

Available in gloss, satin, and matte variations.

Shades: Ecological white satin and thousands of ecological shades through the CHROMASYSTEM mixing system.

Application method: Brush, roller, spray gun.

Drying: Dry in depth: 3±1 hours. Recoating after 6±1 hours.

Thinning: Thinned with water in a ratio of 10-15% v/v for brush, roller application, and up to 20% v/v for spray gun application.

Coverage: 18±2 m²/Lt, per layer.

Application instructions:

• Before application, dust and loose materials should be removed.
• New wood surfaces should be primed with VELATURA AQUA or AQUAVEL.
• On new metal surfaces, suitable anti-corrosion protection with PRIMETAL AQUA primer should be applied beforehand.
• ULTRALAC AQUA is applied in 2 layers.
• The next layer is applied after the previous one has fully hardened.

Painting method: Short synthetic fiber roller, synthetic bristle brush, spray gun.

Thinning solvent: Water.

Thinning percentage: For brush, roller application: 10-15% v/v. For spray gun application: Up to 20% v/v.

Painting tools are cleaned with plenty of water and soap. Wash fluids and paint residues should not enter drains or rivers or be disposed of with household waste or poured out. Consult the local authority’s instructions regarding waste disposal and collection.

Technical Specifications Sheet of CHROTEX.