Skroutz.mt

Geyser 2AC25N Wall Mounted Electric Single-Phase Instant Water Heater for Bathroom 5kW
Instant Water Heaters & Instant Heater Taps

Geyser 2AC25N Wall Mounted Electric Single-Phase Instant Water Heater for Bathroom 5kW

Key features:

  • Electric Single-phase
  • Maximum Power: 5 kW
  • Maximum Flow Rate: 1.5 lt/min
  • Dimensions: 31 x 31 x 12 cm

The Geyser instant water heater has a maximum power of 5 kW and is suitable for the home, the cottage, or anywhere else you want to have instant hot water.

See full description
Review the product
Product report

Description

Description

Installation

It is suitable for individual use (application only to one supply) in the bathroom, it can be installed easily and quickly. It offers convenience in use or maintenance and meets your daily needs for hot water.

Temperature Control

The adjustment of the water outlet temperature is done proportionally and depends on the water flow rate, according to the selected power.

Features:

  • Hot water in seconds
  • Absolutely safe to use
  • Equipped with all necessary electrical protections
  • Maximum water temperature 55°C
  • Water outlet pipe rotates 360°
  • No need for central heating or water heater
  • Operating pressure: 0.1 - 0.6 MPa (0.1 - 6 bar)
  • Get exactly the hot water you need instantly
  • Precise temperature and water pressure adjustment
  • No water or energy loss
  • Beautiful design for the kitchen, bathroom, cottage
  • Easy and quick installation
  • Power: 5000W

What is an instant water heater?

The instant water heater is a type of water heater that heats water in real-time. It heats only the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts in the resistance and other components.

It operates with electricity and is single-phase.

How It Works

The instant water heater has a cold water inlet pipe, which passes through the heating element, gets heated, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the incoming cold water should not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 55 °C, while the maximum water flow rate reaches up to 1.5 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

Advantages of instant water heaters compared to traditional electric water heaters

  • It is small in size and does not take up much space.
  • There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
  • The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
  • There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
  • The hot water never runs out. As long as we have the tap open, we will have hot water.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Power Source
Electric Single Phase
Maximum Power
5 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
1.5 lt/min
Maximum Temperature
55 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Heating Levels
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
31 cm
Width
31 cm
Length
12 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Installation

It is suitable for individual use (application only to one supply) in the bathroom, it can be installed easily and quickly. It offers convenience in use or maintenance and meets your daily needs for hot water.

Temperature Control

The adjustment of the water outlet temperature is done proportionally and depends on the water flow rate, according to the selected power.

Features:

  • Hot water in seconds
  • Absolutely safe to use
  • Equipped with all necessary electrical protections
  • Maximum water temperature 55°C
  • Water outlet pipe rotates 360°
  • No need for central heating or water heater
  • Operating pressure: 0.1 - 0.6 MPa (0.1 - 6 bar)
  • Get exactly the hot water you need instantly
  • Precise temperature and water pressure adjustment
  • No water or energy loss
  • Beautiful design for the kitchen, bathroom, cottage
  • Easy and quick installation
  • Power: 5000W

What is an instant water heater?

The instant water heater is a type of water heater that heats water in real-time. It heats only the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts in the resistance and other components.

It operates with electricity and is single-phase.

How It Works

The instant water heater has a cold water inlet pipe, which passes through the heating element, gets heated, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the incoming cold water should not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that can be reached for hot water production is 55 °C, while the maximum water flow rate reaches up to 1.5 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

Advantages of instant water heaters compared to traditional electric water heaters

  • It is small in size and does not take up much space.
  • There are no energy losses, as only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a traditional water heater, the hot water that is not used goes to waste.
  • The hot water used in the instant water heater is used as is, without mixing with cold, as happens in a traditional water heater. Thus, we also save water, in addition to electricity.
  • There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water flows in a few seconds. The traditional water heater takes a few minutes, depending on its size.
  • The hot water never runs out. As long as we have the tap open, we will have hot water.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Power Source
Electric Single Phase
Maximum Power
5 kW

Maximum Power

The higher the power of the water heater, the faster the water can be heated and therefore the greater the flow of water at the selected temperature.

2. Those with a power of up to 5-6kw are usually used in a sink, while those intended for use in the shower usually have a power greater than 10kw.
Maximum Flow Rate
1.5 lt/min
Maximum Temperature
55 °C

Maximum Temperature

As an indication, 38-42 °C degrees are usually used for a hot shower.
Temperature Setting
Heating Levels
Placement
Bathroom
Wall Mounted
Yes
Inverter
No
Remote Control
No

Dimensions

Height
31 cm
Width
31 cm
Length
12 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

129,00 €
14,00 €   shipping cost