Isomat AG 77 is a brush-on emulsion that protects building façades, statues, monuments and metal signs from graffiti and environmental pollutants. It is paraffin-based and dries to a clear finish without affecting the appearance of the surface. It makes cleaning easier and facilitates poster removal.
Suitable for application on concrete, plaster, stone, metal, marble and painted surfaces. Graffiti can be cleaned using hot pressurised water or a sponge. For stubborn stains, use a detergent or SM-27. The surface must be protected again after cleaning. On painted surfaces, clean quickly and carefully to avoid damaging the paint.
- Type: Brush-on emulsion
- Base: Paraffin-based
- Colour: White
- Appearance when dry: Clear
- Protection against: Graffiti and environmental pollutants
- Suitable surfaces: Concrete, plaster, stone, metal, marble and painted surfaces
- Application: With a roller, brush or spray, in 1–2 coats
- Dilution: Dilute the first coat with up to 10% water by weight on highly absorbent surfaces
- Application temperature: From +5 to +40 °C
- Weathering resistance: 2–3 years
- Specific gravity: 1.00 kg/l
- pH: 7–8
- Coverage: 50–100 ml/m², depending on the surface’s absorbency
- Volume: 1 lt
Specifications
- Type
- Glaze
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 1 lt
- Weight
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.