Skroutz.mt

LW 1202 N Electric Eccentric Sander 130mm Electric 1600W 477761
Sanders

LW 1202 N Electric Eccentric Sander 130mm Electric 1600W 477761

The Flex LW 1202 N eccentric sander has a power rating of 1600 W and a backing pad with a maximum diameter of 130 mm. Water is supplied through the drive shaft, allowing granite and marble to be...

The Flex LW 1202 N eccentric sander has a power rating of 1600 W and a backing pad with a maximum diameter of 130 mm. Water is supplied through the drive shaft, allowing granite and marble to be wet-polished. The drive shaft has a ceramic coating to protect it from rust.

The safety plug may only be connected to an isolation transformer, and the sander may...

See full description See full description

Top specs

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • See all
589 00 €
Delivery Tue, 10 Nov - Thu, 12 Nov
14,00 €   shipping cost
Sent from Greece
From Mytoolstore 3.8 (9)
3.8 (9 reviews)
Greece
20 pieces
See Power Tools on the page of Mytoolstore

Shop selection criteria

Why do we recommend buying from this shop?

We don’t only look at the price. We weigh different factors to find an offer that combines a good price, fast delivery and a reliable purchase.

  • Product price

    We calculate the total price you will pay and any discounts available from the shop.

  • Shipping & delivery time

    We check how quickly the product can be shipped and when you will receive it, based on your address.

  • Shop reliability

    We look at how often shops complete their orders successfully and how consistently they serve their customers.

  • Official reseller

    Where available, we take into account whether the shop is an official reseller of the brand.

Learn more about invoicing
Review the product
Product report

Description

Description

The Flex LW 1202 N eccentric sander has a power rating of 1600 W and a backing pad with a maximum diameter of 130 mm. Water is supplied through the drive shaft, allowing granite and marble to be wet-polished. The drive shaft has a ceramic coating to protect it from rust.

The safety plug may only be connected to an isolation transformer, and the sander may only be operated with the FLEX TT 2000 transformer. Includes a brass quick connector for a 1/2" water hose and an SW 17 open-end wrench.

  • Power supply: Mains
  • Power: 1600 W
  • Backing pad diameter: Up to 130 mm
  • No-load speed: 1750 rpm
  • Spindle thread: M14
  • Cable length: 4 m
  • Weight: 4.8 kg
  • Water supply: Through the drive shaft
  • Shaft coating: Ceramic
  • Handle: Reinforced
  • Connection: Only to the FLEX TT 2000 isolation transformer
  • Package contents: Brass quick connector for a 1/2" water hose, SW 17 open-end wrench

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1600 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
1750 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
130 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Flex LW 1202 N eccentric sander has a power rating of 1600 W and a backing pad with a maximum diameter of 130 mm. Water is supplied through the drive shaft, allowing granite and marble to be wet-polished. The drive shaft has a ceramic coating to protect it from rust.

The safety plug may only be connected to an isolation transformer, and the sander may only be operated with the FLEX TT 2000 transformer. Includes a brass quick connector for a 1/2" water hose and an SW 17 open-end wrench.

  • Power supply: Mains
  • Power: 1600 W
  • Backing pad diameter: Up to 130 mm
  • No-load speed: 1750 rpm
  • Spindle thread: M14
  • Cable length: 4 m
  • Weight: 4.8 kg
  • Water supply: Through the drive shaft
  • Shaft coating: Ceramic
  • Handle: Reinforced
  • Connection: Only to the FLEX TT 2000 isolation transformer
  • Package contents: Brass quick connector for a 1/2" water hose, SW 17 open-end wrench

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Power Specifications

Power
1600 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Cable Length
4 m

Features & Functions

Dust Suction System
No

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
No

Speed Setting

Ability to control the rotation speed of the tool.
Turns
1750 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
130 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

589,00 €
14,00 €   shipping cost
Flex