Kraft Master Basics plastic paint in a red shade is used to tint plastic and acrylic paints. It can be applied undiluted or mixed with white paint to create shades. Its matte finish is intended for interior walls and ceilings. It is almost odorless and can be applied with a brush, roller or airless spray gun.
Dilute with 5–15% water and apply in two coats. The surface must be dry, stable and clean. Surface drying takes 1–2 hours, while the minimum recoating time is 5–7 hours. Coverage per coat is 10–12 m²/L, depending on the shade, application method and surface absorbency.
- Use: Interior
- Color: Red
- Quantity: 375 ml
- Finish: Matte
- Application: With a brush, roller or airless spray gun
- Dilution: 5–15% by volume with water
- Number of coats: 2
- Surface drying: 1–2 hours at 25°C and 50% relative humidity
- Minimum recoating time: 5–7 hours
- Coverage per coat: 10–12 m²/L, depending on the shade, application method and surface absorbency
- Application temperature: 5–35°C
- Maximum relative humidity during application: 65%
- Density: 1.24–1.42 g/mL at 25°C, depending on the base and shade
- Solids by weight: 54% (±3)
- pH: 8.5–9.7
- Gloss at 60°: < 3.0 GU
- Dry film thickness: 75 μm (±10) in 2 coats
- VOC content: 29 g/L (limit value: 30 g/L)
- Tool cleaning: Immediately after use with warm water and soap
- Storage: 5–35°C
- Usage
- Interior
- Quantity
- 0.375 lt
- Weight
- -
- Colour
- Red
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.