Description
Specifications
Kraft Master Basics plastic paint in a red shade can be used as is or to tint plastic and acrylic paints. It leaves a matte finish on interior walls and ceilings, spreads evenly and is almost odourless. When applied as is, it withstands frequent washing.
For application, dilute by 5–15% by volume with tap water and apply in two coats. The surface must be dry, sound and free of dust and loose material. The minimum time before recoating is 5–7 hours. Clean tools immediately with warm water and soap.
- Use: Interior
- Colour: Red
- Quantity: 3 lt
- Finish: Matte
- Application: With a brush, roller or airless spray gun
- Dilution: 5–15% by volume with water
- Coverage per coat: 10–12 m²/lt, depending on the shade, application method and surface absorbency
- Surface drying: 1–2 hours at 25°C and 50% relative humidity
- Minimum time before recoating: 5–7 hours
- Density at 25°C: 1.24–1.42 g/mL, depending on the base and shade
- Solids by weight: 54% (±3)
- pH: 8.5–9.7
- Gloss at 60°: < 3.0 GU
- Recommended dry film thickness: 75 μm (±10) in two coats
- Maximum VOC content: 29 g/L (limit value 30 g/L)
- Application temperature: From 5°C to 35°C, with relative humidity up to 65%
- Storage: From 5°C to 35°C
- Usage
- Interior
- Quantity
- 3 lt
- Colour
- Red
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.