Lock "Tongue" Domus rectangular, cylinder 83mm with 3 keys, chrome finish, is the ideal solution for aluminum profiles. Features: - Easy conversion of the upper tongue to right or left. - Distance...
Lock "Tongue" Domus rectangular, cylinder 83mm with 3 keys, chrome finish, is the ideal solution for aluminum profiles. Features: - Easy conversion of the upper tongue to right or left. - Distance face/center lock: 35 mm. - Distance center of knob hole/center of lock: 85 mm. Replacement instruction: - Measure from the face of the lock to the center of the...
Lock "Tongue" Domus rectangular, cylinder 83mm with 3 keys, chrome finish, is the ideal solution for aluminum profiles.
Features:
- Easy conversion of the upper tongue to right or left.
- Distance face/center lock: 35 mm.
- Distance center of knob hole/center of lock: 85 mm.
Replacement instruction:
- Measure from the face of the lock to the center of the cylinder where the key goes in.
- Remove the knobs by unscrewing the screws below the rotating base.
- Unscrew the cylinder screw and remove the cylinder.
- Unscrew the end screws of the lock and remove it from the door.
- Install the new lock by first screwing in the end screws.
- Reinstall the two knobs and the cylinder rosette.
In English, the specification name "Γλωσσού" translates to "Tongue"
Yes
Recessed Locks
No
Security
Yes
Bilias
No
with Cylinder
Yes
Three-Point Locks
No
Colour
Silver
Center
35 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Lock "Tongue" Domus rectangular, cylinder 83mm with 3 keys, chrome finish, is the ideal solution for aluminum profiles.
Features:
- Easy conversion of the upper tongue to right or left.
- Distance face/center lock: 35 mm.
- Distance center of knob hole/center of lock: 85 mm.
Replacement instruction:
- Measure from the face of the lock to the center of the cylinder where the key goes in.
- Remove the knobs by unscrewing the screws below the rotating base.
- Unscrew the cylinder screw and remove the cylinder.
- Unscrew the end screws of the lock and remove it from the door.
- Install the new lock by first screwing in the end screws.
- Reinstall the two knobs and the cylinder rosette.
In English, the specification name "Γλωσσού" translates to "Tongue"
Yes
Recessed Locks
No
Security
Yes
Bilias
No
with Cylinder
Yes
Three-Point Locks
No
Colour
Silver
Center
35 mm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
