Bench Saws

Einhell TC-TS 200 Bench Saw 800W, Cutting Disc Diameter 200mm & Cutting Speed 2950rpm 4340415

The Einhell TC-TS 200 bench table saw cuts wood, fibreboard and other materials. The carbide-tipped blade has a diameter of 200 mm and tilts to the left by up to 45°, while the angle stop allows...

The Einhell TC-TS 200 bench table saw cuts wood, fibreboard and other materials. The carbide-tipped blade has a diameter of 200 mm and tilts to the left by up to 45°, while the angle stop allows angled cuts of 60°.

The parallel guide has dual clamping and two adjustable heights. The tool features a dust extraction system, an integrated cable holder and a...

See full description See full description
118 99 €
Delivery by Mon, 16 Nov
50,00 €   shipping cost
Sent from Greece
From Tripanaki 4.8 (59)

Learn more about invoicing

Description

Description

The Einhell TC-TS 200 bench table saw cuts wood, fibreboard and other materials. The carbide-tipped blade has a diameter of 200 mm and tilts to the left by up to 45°, while the angle stop allows angled cuts of ±60°.

The parallel guide has dual clamping and two adjustable heights. The tool features a dust extraction system, an integrated cable holder and a separate holder for the push stick.

  • Power: 800 W
  • Power supply: Mains-powered
  • Rotational speed: 2950 rpm
  • Blade diameter: 200 mm
  • Blade bore diameter: 16 mm
  • Blade tilt: Up to 45°
  • Angle stop: ±60°
  • Maximum cutting height at 45°: 27 mm
  • Maximum cutting height at 90°: 45 mm
  • Parallel guide: With dual clamping and two adjustable heights
  • Dust extraction system: Available
  • Dust extraction adapter diameter: 36 mm
  • Worktable size: 505 × 373 mm
  • Cable holder: Integrated
  • Push stick: With a separate holder

Manufacturer

See full description

Specifications

Specifications

Specifications

Power
800 W
Disc Diameter
200 mm
Cutting Speed
2950 rpm
Maximum Cutting Height 45°
27 mm
Maximum Cutting Height 90°
45 mm
Power Source
Electric

Additional Specifications

Cutting Guide (laser)
No
Dust Suction System
Yes
Soft Start
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • John_Tzortzakis
    5
    5 out of 6 members found this review helpful

    Absolutely satisfied with this tool! Ideal for amateurs and not only, with excellent usability. The user manual is clear and helpful, with step-by-step instructions that simplify the process. Its stability is reliable, while the measuring tools are perfectly symmetrical and accurate without requiring adjustments. The disk guard is sturdy and safe, with no instances of disconnection or breakage during operation. Additionally, it features a disk height adjuster, allowing easy customization based on the thickness of the wood, preventing jamming or burning. It's worth every euro, offering professional results at an affordable price. I highly recommend it for DIY projects and small constructions!

    Translated from Greek ·
    Did you find this review helpful?
  • djcrissgr
    1
    22 out of 23 members found this review helpful

    Not even for extremely amateur work.. its guide is laughable, it is not stable, the level was asymmetrical resulting in one level showing one measurement and the other level showing a different measurement (I had to detach them, measure and stick them back myself) and the disc guard was loose, resulting in the disc grabbing it and breaking it into 100 pieces, scattering them everywhere (including on me, of course). The worst thing on the market. Also, as a downside, I should mention that it does not have a disc height adjuster, resulting in the disc always being at its highest height, which is not good at all when cutting thin pieces of wood because it gets stuck or burns the wood... It's better to spend a few extra bucks and get something better.

    Translated from Greek ·
    Did you find this review helpful?
  • Absolutely satisfied with this tool! Ideal for amateurs and not only, with excellent usability. The user manual is clear and helpful, with step-by-step instructions that simplify the process. Its stability is reliable, while the measuring tools are perfectly symmetrical and accurate without requiring adjustments. The disk guard is sturdy and safe, with no instances of disconnection or breakage during operation. Additionally, it features a disk height adjuster, allowing easy customization based on the thickness of the wood, preventing jamming or burning. It's worth every euro, offering professional results at an affordable price. I highly recommend it for DIY projects and small constructions!

    Translated from Greek ·
    5
  • Not even for extremely amateur work.. its guide is laughable, it is not stable, the level was asymmetrical resulting in one level showing one measurement and the other level showing a different measurement (I had to detach them, measure and stick them back myself) and the disc guard was loose, resulting in the disc grabbing it and breaking it into 100 pieces, scattering them everywhere (including on me, of course). The worst thing on the market. Also, as a downside, I should mention that it does not have a disc height adjuster, resulting in the disc always being at its highest height, which is not good at all when cutting thin pieces of wood because it gets stuck or burns the wood... It's better to spend a few extra bucks and get something better.

    Translated from Greek ·
    22
  • See all

Description & Specifications

The Einhell TC-TS 200 bench table saw cuts wood, fibreboard and other materials. The carbide-tipped blade has a diameter of 200 mm and tilts to the left by up to 45°, while the angle stop allows angled cuts of ±60°.

The parallel guide has dual clamping and two adjustable heights. The tool features a dust extraction system, an integrated cable holder and a separate holder for the push stick.

  • Power: 800 W
  • Power supply: Mains-powered
  • Rotational speed: 2950 rpm
  • Blade diameter: 200 mm
  • Blade bore diameter: 16 mm
  • Blade tilt: Up to 45°
  • Angle stop: ±60°
  • Maximum cutting height at 45°: 27 mm
  • Maximum cutting height at 90°: 45 mm
  • Parallel guide: With dual clamping and two adjustable heights
  • Dust extraction system: Available
  • Dust extraction adapter diameter: 36 mm
  • Worktable size: 505 × 373 mm
  • Cable holder: Integrated
  • Push stick: With a separate holder

Manufacturer

Specifications

Power
800 W
Disc Diameter
200 mm
Cutting Speed
2950 rpm
Maximum Cutting Height 45°
27 mm
Maximum Cutting Height 90°
45 mm
Power Source
Electric

Additional Specifications

Cutting Guide (laser)
No
Dust Suction System
Yes
Soft Start
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • John_Tzortzakis
    5
    5 out of 6 members found this review helpful

    Absolutely satisfied with this tool! Ideal for amateurs and not only, with excellent usability. The user manual is clear and helpful, with step-by-step instructions that simplify the process. Its stability is reliable, while the measuring tools are perfectly symmetrical and accurate without requiring adjustments. The disk guard is sturdy and safe, with no instances of disconnection or breakage during operation. Additionally, it features a disk height adjuster, allowing easy customization based on the thickness of the wood, preventing jamming or burning. It's worth every euro, offering professional results at an affordable price. I highly recommend it for DIY projects and small constructions!

    Translated from Greek ·
    Did you find this review helpful?
  • djcrissgr
    1
    22 out of 23 members found this review helpful

    Not even for extremely amateur work.. its guide is laughable, it is not stable, the level was asymmetrical resulting in one level showing one measurement and the other level showing a different measurement (I had to detach them, measure and stick them back myself) and the disc guard was loose, resulting in the disc grabbing it and breaking it into 100 pieces, scattering them everywhere (including on me, of course). The worst thing on the market. Also, as a downside, I should mention that it does not have a disc height adjuster, resulting in the disc always being at its highest height, which is not good at all when cutting thin pieces of wood because it gets stuck or burns the wood... It's better to spend a few extra bucks and get something better.

    Translated from Greek ·
    Did you find this review helpful?
  • Absolutely satisfied with this tool! Ideal for amateurs and not only, with excellent usability. The user manual is clear and helpful, with step-by-step instructions that simplify the process. Its stability is reliable, while the measuring tools are perfectly symmetrical and accurate without requiring adjustments. The disk guard is sturdy and safe, with no instances of disconnection or breakage during operation. Additionally, it features a disk height adjuster, allowing easy customization based on the thickness of the wood, preventing jamming or burning. It's worth every euro, offering professional results at an affordable price. I highly recommend it for DIY projects and small constructions!

    Translated from Greek ·
    5
  • Not even for extremely amateur work.. its guide is laughable, it is not stable, the level was asymmetrical resulting in one level showing one measurement and the other level showing a different measurement (I had to detach them, measure and stick them back myself) and the disc guard was loose, resulting in the disc grabbing it and breaking it into 100 pieces, scattering them everywhere (including on me, of course). The worst thing on the market. Also, as a downside, I should mention that it does not have a disc height adjuster, resulting in the disc always being at its highest height, which is not good at all when cutting thin pieces of wood because it gets stuck or burns the wood... It's better to spend a few extra bucks and get something better.

    Translated from Greek ·
    22
  • See all
118,99 €
50,00 €   shipping cost