Insulating & Sealing Materials

Berling Acrylic Sealant PU Hybrid Elastomeric Acrylic Cementitious Polyurethane Waterproofing 3lt White

The Berling Acrylic Sealant PU Hybrid elastomeric waterproofing membrane forms a continuous, seamless film for waterproofing rooftops. Its water-based formula contains acrylic and polyurethane resins,...

The Berling Acrylic Sealant PU Hybrid elastomeric waterproofing membrane forms a continuous, seamless film for waterproofing rooftops. Its water-based formula contains acrylic and polyurethane resins, and the film follows the surface as it contracts and expands. With 82% solar reflectance, it is a cool material that helps improve the building’s thermal...

See full description See full description

Top specs

See all
  • Capacity 3 lt
  • Application Surface Terrace
The product is not available for shipping to the selected country.

Description & Specifications

The Berling Acrylic Sealant PU Hybrid elastomeric waterproofing membrane forms a continuous, seamless film for waterproofing rooftops. Its water-based formula contains acrylic and polyurethane resins, and the film follows the surface as it contracts and expands. With 82% solar reflectance, it is a cool material that helps improve the building’s thermal comfort.

It can be applied to concrete, cement screeds and roof tiles, as well as to joints and wooden, metal or cement-based surfaces after suitable preparation. It has high resistance to standing water, but is not suitable for prolonged immersion. It contains additives that prevent microorganisms from growing on the film. Apply with a brush or roller in two coats, allowing each coat to dry thoroughly before applying the next. When reinforcement is used, apply one additional coat.

  • Type: Water-based acrylic-polyurethane elastomeric membrane
  • Capacity: 3 lt
  • Colour: White
  • Application surface: Rooftops
  • Surface materials: Cement-based and metal surfaces, concrete, cement screeds, roof tiles and wood
  • Elongation: Over 350% (ASTM D2370)
  • Solar reflectance: 82% (ASTM G159-98)
  • Resistance to standing water: High; not suitable for prolonged immersion
  • Weather resistance: Exterior use
  • Additives: Prevent the growth of microorganisms on the film
  • Coverage: 1.0–1.5 m²/lt, depending on the surface and application method
  • Touch dry: 2–4 hours
  • Through-dry: At least 48 hours
  • Recoating: After 12 hours
  • Thinning: With water, up to 15% by volume
  • Density: 1.30 g/cm³
  • VOC: Up to 40 g/lt (Directive 2004/42/EC, category A/c)

Manufacturer

Product Details

Type
-
Colour
White
Application Surface
Terrace
Application Surface Material
Cementitious, Metallic

Additional Specifications

Polyurethane
Yes
Elastomer
Yes
Acrylic
Yes
Bituminous
No
Cementitious
Yes
2-Component
No

Packaging

Capacity
3 lt

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.