Kraft Rust Blocker Primer is an alkyd-based, solvent-borne anti-rust primer for metal surfaces such as railings, agricultural machinery and vehicle bodies. It creates a smooth, uniform matt surface before application of the topcoat and contains non-toxic anti-corrosive pigments.
Ready to use and can be applied with a brush, roller or spray gun. Apply 1–2 coats to new or previously painted surfaces. After 24 hours, lightly sand the surface before applying the topcoat. Surface drying time is 1–2 hours at 25°C and 50% relative humidity, while the minimum recoat time is 24 hours.
- Type: Primer
- Composition: Alkyd-based, solvent-borne
- Properties: Anti-rust
- Pigments: Non-toxic anti-corrosive pigments
- Surface material: Metal
- Suitable surfaces: Exterior metal surfaces, such as railings, agricultural machinery and vehicle bodies
- Colour: Grey
- Volume: 2.5 L
- Application tools: Brush, roller or spray gun
- Number of coats: 1–2
- Thinning for brush or roller application: 5–10% by volume with KRAFT BRUSH THINNER, if needed
- Thinning for spray application: 5–10% by volume with KRAFT NITRO 1100
- Surface drying time: 1–2 hours at 25°C and 50% relative humidity
- Minimum recoat time: 24 hours
- Application temperature: From 5°C to 35°C
- Maximum relative humidity for application: 65%
- Tool cleaning: With KRAFT BRUSH THINNER, then with warm water and soap
- Storage: Store in a cool place, away from sunlight and frost
Specifications
- Genre
- Primer
- Surface Material
- Metal
- Surfaces
- External
- Properties
- Antirust
Quantity
- Mass Gaining
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.