Special Paint & Additives

Kraft Sport Coat Special Paint Colour Green 10L

Kraft Sport Coat paint is designed for sports floors made of concrete or asphalt, such as tennis, basketball and volleyball courts. It is water-based and contains quartz aggregates, forming a...

Kraft Sport Coat paint is designed for sports floors made of concrete or asphalt, such as tennis, basketball and volleyball courts. It is water-based and contains quartz aggregates, forming a self-levelling, elastic and non-slip surface. It is resistant to abrasion, UV radiation and weathering.

Apply with a roller, brush, broom, squeegee or airless spray...

See Description & Specifications See Description & Specifications
The product is not available for shipping to the selected country.

Description & Specifications

Kraft Sport Coat paint is designed for sports floors made of concrete or asphalt, such as tennis, basketball and volleyball courts. It is water-based and contains quartz aggregates, forming a self-levelling, elastic and non-slip surface. It is resistant to abrasion, UV radiation and weathering.

Apply with a roller, brush, broom, squeegee or airless spray gun. New surfaces require two coats; a third coat may be applied in demanding conditions of use. Coverage depends on the texture of the substrate, painting conditions and application method.

  • Type: Sports floor paint
  • Colour: Green
  • Volume: 10 L
  • Finish: Matte
  • Base: Water-based
  • Composition: Acrylic
  • Ingredients: Quartz aggregates
  • Surface properties: Self-levelling, elastic and non-slip
  • Resistance: Abrasion, UV radiation and weathering
  • Suitable surfaces: Concrete and asphalt
  • Coverage: 4–6 m²/L per coat
  • Coats on new surfaces: 2
  • Additional coat: 1 in demanding conditions of use
  • Application tools: Roller, brush, broom, squeegee or airless spray gun
  • Application temperature: 5°C to 35°C
  • Relative humidity during application: Below 65%
  • Thinning: Not recommended
  • Touch dry: 1–2 hours at 23°C
  • Recoating: After at least 6 hours
  • Full curing: 7 days
  • Tool cleaning: Immediately after use with warm water and soap or detergent
  • Storage: From 5°C to 35°C, away from direct sunlight and rain, with the container tightly sealed when not in use

Manufacturer

Specifications

Type
Colour
Colour
Green
Acrilyc
No
Luminosity
Matt

Quantity

Volume
10 lt
Weight
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.