Isomat Stuccocret putty is a fine-grained, resin-based powder putty for skim coating and smoothing interior surfaces. When mixed with water, it forms a homogeneous paste with good workability that spreads easily without forming lumps. Apply in two coats using a putty knife; apply the second coat after the first has set, following a wait of 2–3 hours.
It is used to prepare plaster, concrete and plasterboard surfaces before painting or applying another coating, and serves as an alternative to oil-based putties. Plaster and concrete surfaces do not require priming or oil-based preparation; plasterboard must be primed with FLEX-PRIMER acrylic primer. Sanding and painting can be carried out after approximately 12 hours.
- Type: General-purpose
- Form: Powder
- Composition: Acrylic, resin-based
- Colour: White
- Weight: 20 kg
- Suitable surfaces: Plaster, concrete and plasterboard
- Application: Interior use
- Number of coats: 2
- Waiting time between coats: 2–3 hours
- Maximum thickness per coat: 1 mm
- Coverage: Approximately 1.1 kg/m² per mm of coat thickness
- Water requirement: 8 l per 20 kg bag
- Sanding: Sandable
- Time before sanding and painting: Approximately 12 hours
- Standard: GP CS II, W0 according to EN 998-1
- Environmental declaration: EPD, registration no. EPD-IES-0006173
- Product Number
- 032601201
Dimensions
- Type
- General-Purpose
- Attributes
- Acrylic, Resinous
- Colour
- White
- Type
- Powder
- Application Surface
- Wall / Plaster, Plasterboard
- Sanding Capability
- Yes
- No Shrinkage / Crack Resistance
- No
Quantity
- Weight
- 20 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.