Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Excellent quality and performance round frame and PWM 140mm fan with RGB (for color enthusiasts). The screw positions are similar to a 120mm fan due to its shape. Maximum speed is around 1750-1850 RPM.
Ideal for installation on an existing CPU cooler. However, it can also be used for a PC tower, as long as the overall available diameter of the case is compatible with its own and does not obstruct the installation of other 120mm fans. This potential issue usually arises in the front positions of the case. Therefore, prefer rear or top positions, depending on the dimensions/screw positions available in the tower for relative installation.
In my opinion, the optimal use is clearly on a CPU cooler, either as an addition as a second fan or as a replacement for the standard fan. As long as your cooler accepts a 140mm fan, which you will find in the installation manual or in the specs published by the respective manufacturer on their website. It was tested with excellent results on the Thermalright Le Grand Macho RT, as it improved the CPU temperature by 2-4 °C compared to the (already very good but with lower RPM, max 1300-1400) standard fan that comes with the cooler. As for the noise level, it is practically silent in the majority of scenarios, but you may hear it from 1500+ RPM (not like a jet!) in case of a stress test or heavy application usage that strains your processor.
In conclusion, it is a high-quality, powerful, and generally quiet fan at a price usually better than similar competitive offerings from other manufacturers.
εξαιρετικής ποιότητας και απόδοσης round frame και pwm 140mm ανεμιστήρας με rgb (για τους λάτρεις των χρωμάτων). οι θέσεις για βίδες είναι ανάλογες ενός ανεμιστήρα 120mm λόγω ακριβώς του σχήματος. max ταχύτητα rpm γύρω στα 1750-1850.
ιδανικός για τοποθέτηση σε υφιστάμενη ψύκτρα CPU. κάνει ωστόσο και για pc tower, αρκεί η συνολική διαθέσιμη διάμετρος του κουτιού να είναι συμβατή με τη δική του και να μην εμποδίσει την εγκατάσταση άλλων 120αριδων ανεμιστήρων. το δυνητικό αυτό πρόβλημα προκύπτει συνήθως στις προστινές θέσεις του κουτιού. κατά συνέπεια, προτιμήστε θέσεις πίσω ή πάνω, αν τον προορίζετε για κουτί, ανάλογα με τις διαστάσεις / θέσεις βιδών που διαθέτει το tower για τη σχετική εγκατάσταση.
η βέλτιστη χρήση κατά τη γνώμη μου είναι σαφώς πάνω σε cpu cooler, είτε ως προσθήκη σαν 2ος, είτε ως αντικατάσταση του standard ανεμιστήρα. αρκεί η ψύκτρα σας να δέχεται 140mm fan, κάτι που θα βρείτε στο εγχειρίδιο εγκατάστασης ή στα specs που δημοσιεύει ο εκάστοτε κατασκευαστής στην ιστοσελίδα του. δοκιμάστηκε με εξαιρετικά αποτελέσματα σε Thermalright Le Grand Macho RT, καθώς βελτίωσε τη θερμοκρασία του cpu κατά 2-4 °C, σε σύγκριση με τον (ήδη πολύ καλό αλλά με χαμηλότερα rpm, max 1300-1400) standard που έρχεται με τη ψύκτρα. όσον αφορά το επίπεδο θορύβου, πρακτικά αθόρυβος στην πλειοψηφία των σεναρίων, αλλά πιθανά θα τον ακούσετε από 1500+rpm και πάνω (όχι σαν τζετ!) σε περίπτωση stress test ή χρήση βαριάς εφαρμογής που καταπονεί τον επεξεργαστή σας.
συμπερασματικά πρόκειται για ποιοτικό, δυνατό και γενικά ήσυχο ανεμιστήρα σε τιμή συνήθως καλύτερη από αντίστοιχες, ανταγωνιστικές προτάσεις άλλων κατασκευαστών.
The quality of the fan and its peripherals is very good. Be careful for those who choose to place it on a front panel of 3x120.. it is likely that the positions for the screws will not match if you try to fit 2x140 in the positions of the 120mm fans (it is designed to be screwed in the same positions as the 120mm fans, which is practical but you lose some performance)... in the Phanteks P400A, I had to make adjustments.. With 2x140, I had incredibly annoying noise from 1000 RPM and above because they were hitting the middle parts of the panel, disrupting the airflow and causing it to whistle. I ended up fitting 2x120 in the front + 1x140 and 1x140 on top, and I had much better results in terms of noise.. It works very effectively up to 1200 RPM... from there, the airflow doubles and the noise quadruples. As for the LED, it disappointed me by emitting a pale turquoise color that I cannot change no matter how hard I try. In conclusion, it has very good performance, very strong airflow, and the noise increases accordingly... Whoever is interested should first study the positions of their case.. if there are screw positions for 140mm fans, prefer the classic square ones... Otherwise, this one is very good but some adjustments may need to be made for it to work properly.
H ποιοτητα του ανεμιστηρα και των περιφερειακών του ειναι πολύ καλη. Προσοχη σε όσους επιλέξουν να τον τοποθετησουν σε μπροστινο πάνελ 3x120.. πιθανοτατα δεν θα σας ταιριαξουν οι θεσεις για τος βιδες αν προσπαθησετε να ταιριαξετε 2×140 στις θεσεις των 120αριδων(ειναι σχεδιασμενος να βιδωνει στις ιδιες θεσεις που βιδωνουν οι 120 αριδες πρακτικο αλλα χανεις μερος της αποδοσης)...σε phanteks p400a χρειαστηκε να κάνω πατεντες.. Με 2 x140 ειχα απιστευτα ενοχλητικο θορυβο απο 1000 στροφες και πανω γιατι εμπαιναν στην μεση κοματια του πανελ χαλοντας την ροη κανοντας το να σφυριζει. Κατεληξα να ταιριαξω μπροστα 2× 120+ 1×140 και 1 × 140 top και ειχα πολυ καλυτερο αποτελεσμα στο θορυβο..Μεχρι τις 1200 δουλευει πολυ αποτελεσματικα...απο κει και πανω απογειωνεται το airflow ×2 και ο θορυβος × 4. Οσον αφορα το led με απογοήτευσε βγαζωντας ενα χλωμο τυρκουαζ χρωμα το οποιο δεν μπορω να αλλαξω όσο κι αν προσπαθησα. Εν κατακλειδι πολυ καλη αποδοση πολυ δυνατο airflow και αναλογα ανεβαινει και ο θορυβος... Οποιος ενδιαφερεται πρωτα να μελετησει τις θεσεις του κουτιου..αν υπαρχουν θεσεις βιδων για 140αρη ανεμιστηρα..προτιμηστε τους κλασσικους τετραγωνους... Διαφορετικα αυτος ειναι πολυ καλος αλλα θα πρεπει να γινουν πατεντες πιθανοτα για να δουλεψει οπως πρεπει.
Very good airflow (5 degrees lower all over the PC) and silent. The RGB cable has, besides the part that goes into the motherboard, another one that allows you to add more RGB in case your motherboard doesn't have it. A small downside is that it doesn't have an airflow direction indicator, but it's not a big deal to add one and see it.
Πολύ καλή ροή αέρα (5 βαθμοί κάτω όλο το πισι) και αθόρυβοι. Το rgb καλώδειο έχει πέρα από το κομμάτι που μπαίνει στην μητρική, και ένα που σου επιτρέπει να βάλεις κι άλλα rgb για περίπτωση που δεν έχει η μητρική σου. Ένα μικρό μείον είναι ότι δεν έχει ένδειξη φοράς του αέρα αλλά δεν είναι και σπουδαίος κόπος να βάλεις έναν και να το δεις.
Excellent quality and performance round frame and PWM 140mm fan with RGB (for color enthusiasts). The screw positions are similar to a 120mm fan due to its shape. Maximum speed is around 1750-1850 RPM.
Ideal for installation on an existing CPU cooler. However, it can also be used for a PC tower, as long as the overall available diameter of the case is compatible with its own and does not obstruct the installation of other 120mm fans. This potential issue usually arises in the front positions of the case. Therefore, prefer rear or top positions, depending on the dimensions/screw positions available in the tower for relative installation.
In my opinion, the optimal use is clearly on a CPU cooler, either as an addition as a second fan or as a replacement for the standard fan. As long as your cooler accepts a 140mm fan, which you will find in the installation manual or in the specs published by the respective manufacturer on their website. It was tested with excellent results on the Thermalright Le Grand Macho RT, as it improved the CPU temperature by 2-4 °C compared to the (already very good but with lower RPM, max 1300-1400) standard fan that comes with the cooler. As for the noise level, it is practically silent in the majority of scenarios, but you may hear it from 1500+ RPM (not like a jet!) in case of a stress test or heavy application usage that strains your processor.
In conclusion, it is a high-quality, powerful, and generally quiet fan at a price usually better than similar competitive offerings from other manufacturers.
εξαιρετικής ποιότητας και απόδοσης round frame και pwm 140mm ανεμιστήρας με rgb (για τους λάτρεις των χρωμάτων). οι θέσεις για βίδες είναι ανάλογες ενός ανεμιστήρα 120mm λόγω ακριβώς του σχήματος. max ταχύτητα rpm γύρω στα 1750-1850.
ιδανικός για τοποθέτηση σε υφιστάμενη ψύκτρα CPU. κάνει ωστόσο και για pc tower, αρκεί η συνολική διαθέσιμη διάμετρος του κουτιού να είναι συμβατή με τη δική του και να μην εμποδίσει την εγκατάσταση άλλων 120αριδων ανεμιστήρων. το δυνητικό αυτό πρόβλημα προκύπτει συνήθως στις προστινές θέσεις του κουτιού. κατά συνέπεια, προτιμήστε θέσεις πίσω ή πάνω, αν τον προορίζετε για κουτί, ανάλογα με τις διαστάσεις / θέσεις βιδών που διαθέτει το tower για τη σχετική εγκατάσταση.
η βέλτιστη χρήση κατά τη γνώμη μου είναι σαφώς πάνω σε cpu cooler, είτε ως προσθήκη σαν 2ος, είτε ως αντικατάσταση του standard ανεμιστήρα. αρκεί η ψύκτρα σας να δέχεται 140mm fan, κάτι που θα βρείτε στο εγχειρίδιο εγκατάστασης ή στα specs που δημοσιεύει ο εκάστοτε κατασκευαστής στην ιστοσελίδα του. δοκιμάστηκε με εξαιρετικά αποτελέσματα σε Thermalright Le Grand Macho RT, καθώς βελτίωσε τη θερμοκρασία του cpu κατά 2-4 °C, σε σύγκριση με τον (ήδη πολύ καλό αλλά με χαμηλότερα rpm, max 1300-1400) standard που έρχεται με τη ψύκτρα. όσον αφορά το επίπεδο θορύβου, πρακτικά αθόρυβος στην πλειοψηφία των σεναρίων, αλλά πιθανά θα τον ακούσετε από 1500+rpm και πάνω (όχι σαν τζετ!) σε περίπτωση stress test ή χρήση βαριάς εφαρμογής που καταπονεί τον επεξεργαστή σας.
συμπερασματικά πρόκειται για ποιοτικό, δυνατό και γενικά ήσυχο ανεμιστήρα σε τιμή συνήθως καλύτερη από αντίστοιχες, ανταγωνιστικές προτάσεις άλλων κατασκευαστών.
The quality of the fan and its peripherals is very good. Be careful for those who choose to place it on a front panel of 3x120.. it is likely that the positions for the screws will not match if you try to fit 2x140 in the positions of the 120mm fans (it is designed to be screwed in the same positions as the 120mm fans, which is practical but you lose some performance)... in the Phanteks P400A, I had to make adjustments.. With 2x140, I had incredibly annoying noise from 1000 RPM and above because they were hitting the middle parts of the panel, disrupting the airflow and causing it to whistle. I ended up fitting 2x120 in the front + 1x140 and 1x140 on top, and I had much better results in terms of noise.. It works very effectively up to 1200 RPM... from there, the airflow doubles and the noise quadruples. As for the LED, it disappointed me by emitting a pale turquoise color that I cannot change no matter how hard I try. In conclusion, it has very good performance, very strong airflow, and the noise increases accordingly... Whoever is interested should first study the positions of their case.. if there are screw positions for 140mm fans, prefer the classic square ones... Otherwise, this one is very good but some adjustments may need to be made for it to work properly.
H ποιοτητα του ανεμιστηρα και των περιφερειακών του ειναι πολύ καλη. Προσοχη σε όσους επιλέξουν να τον τοποθετησουν σε μπροστινο πάνελ 3x120.. πιθανοτατα δεν θα σας ταιριαξουν οι θεσεις για τος βιδες αν προσπαθησετε να ταιριαξετε 2×140 στις θεσεις των 120αριδων(ειναι σχεδιασμενος να βιδωνει στις ιδιες θεσεις που βιδωνουν οι 120 αριδες πρακτικο αλλα χανεις μερος της αποδοσης)...σε phanteks p400a χρειαστηκε να κάνω πατεντες.. Με 2 x140 ειχα απιστευτα ενοχλητικο θορυβο απο 1000 στροφες και πανω γιατι εμπαιναν στην μεση κοματια του πανελ χαλοντας την ροη κανοντας το να σφυριζει. Κατεληξα να ταιριαξω μπροστα 2× 120+ 1×140 και 1 × 140 top και ειχα πολυ καλυτερο αποτελεσμα στο θορυβο..Μεχρι τις 1200 δουλευει πολυ αποτελεσματικα...απο κει και πανω απογειωνεται το airflow ×2 και ο θορυβος × 4. Οσον αφορα το led με απογοήτευσε βγαζωντας ενα χλωμο τυρκουαζ χρωμα το οποιο δεν μπορω να αλλαξω όσο κι αν προσπαθησα. Εν κατακλειδι πολυ καλη αποδοση πολυ δυνατο airflow και αναλογα ανεβαινει και ο θορυβος... Οποιος ενδιαφερεται πρωτα να μελετησει τις θεσεις του κουτιου..αν υπαρχουν θεσεις βιδων για 140αρη ανεμιστηρα..προτιμηστε τους κλασσικους τετραγωνους... Διαφορετικα αυτος ειναι πολυ καλος αλλα θα πρεπει να γινουν πατεντες πιθανοτα για να δουλεψει οπως πρεπει.
Very good airflow (5 degrees lower all over the PC) and silent. The RGB cable has, besides the part that goes into the motherboard, another one that allows you to add more RGB in case your motherboard doesn't have it. A small downside is that it doesn't have an airflow direction indicator, but it's not a big deal to add one and see it.
Πολύ καλή ροή αέρα (5 βαθμοί κάτω όλο το πισι) και αθόρυβοι. Το rgb καλώδειο έχει πέρα από το κομμάτι που μπαίνει στην μητρική, και ένα που σου επιτρέπει να βάλεις κι άλλα rgb για περίπτωση που δεν έχει η μητρική σου. Ένα μικρό μείον είναι ότι δεν έχει ένδειξη φοράς του αέρα αλλά δεν είναι και σπουδαίος κόπος να βάλεις έναν και να το δεις.
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.
Excellent quality and performance round frame and PWM 140mm fan with RGB (for color enthusiasts). The screw positions are similar to a 120mm fan due to its shape. Maximum speed is around 1750-1850 RPM.
Ideal for installation on an existing CPU cooler. However, it can also be used for a PC tower, as long as the overall available diameter of the case is compatible with its own and does not obstruct the installation of other 120mm fans. This potential issue usually arises in the front positions of the case. Therefore, prefer rear or top positions, depending on the dimensions/screw positions available in the tower for relative installation.
In my opinion, the optimal use is clearly on a CPU cooler, either as an addition as a second fan or as a replacement for the standard fan. As long as your cooler accepts a 140mm fan, which you will find in the installation manual or in the specs published by the respective manufacturer on their website. It was tested with excellent results on the Thermalright Le Grand Macho RT, as it improved the CPU temperature by 2-4 °C compared to the (already very good but with lower RPM, max 1300-1400) standard fan that comes with the cooler. As for the noise level, it is practically silent in the majority of scenarios, but you may hear it from 1500+ RPM (not like a jet!) in case of a stress test or heavy application usage that strains your processor.
In conclusion, it is a high-quality, powerful, and generally quiet fan at a price usually better than similar competitive offerings from other manufacturers.
εξαιρετικής ποιότητας και απόδοσης round frame και pwm 140mm ανεμιστήρας με rgb (για τους λάτρεις των χρωμάτων). οι θέσεις για βίδες είναι ανάλογες ενός ανεμιστήρα 120mm λόγω ακριβώς του σχήματος. max ταχύτητα rpm γύρω στα 1750-1850.
ιδανικός για τοποθέτηση σε υφιστάμενη ψύκτρα CPU. κάνει ωστόσο και για pc tower, αρκεί η συνολική διαθέσιμη διάμετρος του κουτιού να είναι συμβατή με τη δική του και να μην εμποδίσει την εγκατάσταση άλλων 120αριδων ανεμιστήρων. το δυνητικό αυτό πρόβλημα προκύπτει συνήθως στις προστινές θέσεις του κουτιού. κατά συνέπεια, προτιμήστε θέσεις πίσω ή πάνω, αν τον προορίζετε για κουτί, ανάλογα με τις διαστάσεις / θέσεις βιδών που διαθέτει το tower για τη σχετική εγκατάσταση.
η βέλτιστη χρήση κατά τη γνώμη μου είναι σαφώς πάνω σε cpu cooler, είτε ως προσθήκη σαν 2ος, είτε ως αντικατάσταση του standard ανεμιστήρα. αρκεί η ψύκτρα σας να δέχεται 140mm fan, κάτι που θα βρείτε στο εγχειρίδιο εγκατάστασης ή στα specs που δημοσιεύει ο εκάστοτε κατασκευαστής στην ιστοσελίδα του. δοκιμάστηκε με εξαιρετικά αποτελέσματα σε Thermalright Le Grand Macho RT, καθώς βελτίωσε τη θερμοκρασία του cpu κατά 2-4 °C, σε σύγκριση με τον (ήδη πολύ καλό αλλά με χαμηλότερα rpm, max 1300-1400) standard που έρχεται με τη ψύκτρα. όσον αφορά το επίπεδο θορύβου, πρακτικά αθόρυβος στην πλειοψηφία των σεναρίων, αλλά πιθανά θα τον ακούσετε από 1500+rpm και πάνω (όχι σαν τζετ!) σε περίπτωση stress test ή χρήση βαριάς εφαρμογής που καταπονεί τον επεξεργαστή σας.
συμπερασματικά πρόκειται για ποιοτικό, δυνατό και γενικά ήσυχο ανεμιστήρα σε τιμή συνήθως καλύτερη από αντίστοιχες, ανταγωνιστικές προτάσεις άλλων κατασκευαστών.
The quality of the fan and its peripherals is very good. Be careful for those who choose to place it on a front panel of 3x120.. it is likely that the positions for the screws will not match if you try to fit 2x140 in the positions of the 120mm fans (it is designed to be screwed in the same positions as the 120mm fans, which is practical but you lose some performance)... in the Phanteks P400A, I had to make adjustments.. With 2x140, I had incredibly annoying noise from 1000 RPM and above because they were hitting the middle parts of the panel, disrupting the airflow and causing it to whistle. I ended up fitting 2x120 in the front + 1x140 and 1x140 on top, and I had much better results in terms of noise.. It works very effectively up to 1200 RPM... from there, the airflow doubles and the noise quadruples. As for the LED, it disappointed me by emitting a pale turquoise color that I cannot change no matter how hard I try. In conclusion, it has very good performance, very strong airflow, and the noise increases accordingly... Whoever is interested should first study the positions of their case.. if there are screw positions for 140mm fans, prefer the classic square ones... Otherwise, this one is very good but some adjustments may need to be made for it to work properly.
H ποιοτητα του ανεμιστηρα και των περιφερειακών του ειναι πολύ καλη. Προσοχη σε όσους επιλέξουν να τον τοποθετησουν σε μπροστινο πάνελ 3x120.. πιθανοτατα δεν θα σας ταιριαξουν οι θεσεις για τος βιδες αν προσπαθησετε να ταιριαξετε 2×140 στις θεσεις των 120αριδων(ειναι σχεδιασμενος να βιδωνει στις ιδιες θεσεις που βιδωνουν οι 120 αριδες πρακτικο αλλα χανεις μερος της αποδοσης)...σε phanteks p400a χρειαστηκε να κάνω πατεντες.. Με 2 x140 ειχα απιστευτα ενοχλητικο θορυβο απο 1000 στροφες και πανω γιατι εμπαιναν στην μεση κοματια του πανελ χαλοντας την ροη κανοντας το να σφυριζει. Κατεληξα να ταιριαξω μπροστα 2× 120+ 1×140 και 1 × 140 top και ειχα πολυ καλυτερο αποτελεσμα στο θορυβο..Μεχρι τις 1200 δουλευει πολυ αποτελεσματικα...απο κει και πανω απογειωνεται το airflow ×2 και ο θορυβος × 4. Οσον αφορα το led με απογοήτευσε βγαζωντας ενα χλωμο τυρκουαζ χρωμα το οποιο δεν μπορω να αλλαξω όσο κι αν προσπαθησα. Εν κατακλειδι πολυ καλη αποδοση πολυ δυνατο airflow και αναλογα ανεβαινει και ο θορυβος... Οποιος ενδιαφερεται πρωτα να μελετησει τις θεσεις του κουτιου..αν υπαρχουν θεσεις βιδων για 140αρη ανεμιστηρα..προτιμηστε τους κλασσικους τετραγωνους... Διαφορετικα αυτος ειναι πολυ καλος αλλα θα πρεπει να γινουν πατεντες πιθανοτα για να δουλεψει οπως πρεπει.
Very good airflow (5 degrees lower all over the PC) and silent. The RGB cable has, besides the part that goes into the motherboard, another one that allows you to add more RGB in case your motherboard doesn't have it. A small downside is that it doesn't have an airflow direction indicator, but it's not a big deal to add one and see it.
Πολύ καλή ροή αέρα (5 βαθμοί κάτω όλο το πισι) και αθόρυβοι. Το rgb καλώδειο έχει πέρα από το κομμάτι που μπαίνει στην μητρική, και ένα που σου επιτρέπει να βάλεις κι άλλα rgb για περίπτωση που δεν έχει η μητρική σου. Ένα μικρό μείον είναι ότι δεν έχει ένδειξη φοράς του αέρα αλλά δεν είναι και σπουδαίος κόπος να βάλεις έναν και να το δεις.
Excellent quality and performance round frame and PWM 140mm fan with RGB (for color enthusiasts). The screw positions are similar to a 120mm fan due to its shape. Maximum speed is around 1750-1850 RPM.
Ideal for installation on an existing CPU cooler. However, it can also be used for a PC tower, as long as the overall available diameter of the case is compatible with its own and does not obstruct the installation of other 120mm fans. This potential issue usually arises in the front positions of the case. Therefore, prefer rear or top positions, depending on the dimensions/screw positions available in the tower for relative installation.
In my opinion, the optimal use is clearly on a CPU cooler, either as an addition as a second fan or as a replacement for the standard fan. As long as your cooler accepts a 140mm fan, which you will find in the installation manual or in the specs published by the respective manufacturer on their website. It was tested with excellent results on the Thermalright Le Grand Macho RT, as it improved the CPU temperature by 2-4 °C compared to the (already very good but with lower RPM, max 1300-1400) standard fan that comes with the cooler. As for the noise level, it is practically silent in the majority of scenarios, but you may hear it from 1500+ RPM (not like a jet!) in case of a stress test or heavy application usage that strains your processor.
In conclusion, it is a high-quality, powerful, and generally quiet fan at a price usually better than similar competitive offerings from other manufacturers.
εξαιρετικής ποιότητας και απόδοσης round frame και pwm 140mm ανεμιστήρας με rgb (για τους λάτρεις των χρωμάτων). οι θέσεις για βίδες είναι ανάλογες ενός ανεμιστήρα 120mm λόγω ακριβώς του σχήματος. max ταχύτητα rpm γύρω στα 1750-1850.
ιδανικός για τοποθέτηση σε υφιστάμενη ψύκτρα CPU. κάνει ωστόσο και για pc tower, αρκεί η συνολική διαθέσιμη διάμετρος του κουτιού να είναι συμβατή με τη δική του και να μην εμποδίσει την εγκατάσταση άλλων 120αριδων ανεμιστήρων. το δυνητικό αυτό πρόβλημα προκύπτει συνήθως στις προστινές θέσεις του κουτιού. κατά συνέπεια, προτιμήστε θέσεις πίσω ή πάνω, αν τον προορίζετε για κουτί, ανάλογα με τις διαστάσεις / θέσεις βιδών που διαθέτει το tower για τη σχετική εγκατάσταση.
η βέλτιστη χρήση κατά τη γνώμη μου είναι σαφώς πάνω σε cpu cooler, είτε ως προσθήκη σαν 2ος, είτε ως αντικατάσταση του standard ανεμιστήρα. αρκεί η ψύκτρα σας να δέχεται 140mm fan, κάτι που θα βρείτε στο εγχειρίδιο εγκατάστασης ή στα specs που δημοσιεύει ο εκάστοτε κατασκευαστής στην ιστοσελίδα του. δοκιμάστηκε με εξαιρετικά αποτελέσματα σε Thermalright Le Grand Macho RT, καθώς βελτίωσε τη θερμοκρασία του cpu κατά 2-4 °C, σε σύγκριση με τον (ήδη πολύ καλό αλλά με χαμηλότερα rpm, max 1300-1400) standard που έρχεται με τη ψύκτρα. όσον αφορά το επίπεδο θορύβου, πρακτικά αθόρυβος στην πλειοψηφία των σεναρίων, αλλά πιθανά θα τον ακούσετε από 1500+rpm και πάνω (όχι σαν τζετ!) σε περίπτωση stress test ή χρήση βαριάς εφαρμογής που καταπονεί τον επεξεργαστή σας.
συμπερασματικά πρόκειται για ποιοτικό, δυνατό και γενικά ήσυχο ανεμιστήρα σε τιμή συνήθως καλύτερη από αντίστοιχες, ανταγωνιστικές προτάσεις άλλων κατασκευαστών.
The quality of the fan and its peripherals is very good. Be careful for those who choose to place it on a front panel of 3x120.. it is likely that the positions for the screws will not match if you try to fit 2x140 in the positions of the 120mm fans (it is designed to be screwed in the same positions as the 120mm fans, which is practical but you lose some performance)... in the Phanteks P400A, I had to make adjustments.. With 2x140, I had incredibly annoying noise from 1000 RPM and above because they were hitting the middle parts of the panel, disrupting the airflow and causing it to whistle. I ended up fitting 2x120 in the front + 1x140 and 1x140 on top, and I had much better results in terms of noise.. It works very effectively up to 1200 RPM... from there, the airflow doubles and the noise quadruples. As for the LED, it disappointed me by emitting a pale turquoise color that I cannot change no matter how hard I try. In conclusion, it has very good performance, very strong airflow, and the noise increases accordingly... Whoever is interested should first study the positions of their case.. if there are screw positions for 140mm fans, prefer the classic square ones... Otherwise, this one is very good but some adjustments may need to be made for it to work properly.
H ποιοτητα του ανεμιστηρα και των περιφερειακών του ειναι πολύ καλη. Προσοχη σε όσους επιλέξουν να τον τοποθετησουν σε μπροστινο πάνελ 3x120.. πιθανοτατα δεν θα σας ταιριαξουν οι θεσεις για τος βιδες αν προσπαθησετε να ταιριαξετε 2×140 στις θεσεις των 120αριδων(ειναι σχεδιασμενος να βιδωνει στις ιδιες θεσεις που βιδωνουν οι 120 αριδες πρακτικο αλλα χανεις μερος της αποδοσης)...σε phanteks p400a χρειαστηκε να κάνω πατεντες.. Με 2 x140 ειχα απιστευτα ενοχλητικο θορυβο απο 1000 στροφες και πανω γιατι εμπαιναν στην μεση κοματια του πανελ χαλοντας την ροη κανοντας το να σφυριζει. Κατεληξα να ταιριαξω μπροστα 2× 120+ 1×140 και 1 × 140 top και ειχα πολυ καλυτερο αποτελεσμα στο θορυβο..Μεχρι τις 1200 δουλευει πολυ αποτελεσματικα...απο κει και πανω απογειωνεται το airflow ×2 και ο θορυβος × 4. Οσον αφορα το led με απογοήτευσε βγαζωντας ενα χλωμο τυρκουαζ χρωμα το οποιο δεν μπορω να αλλαξω όσο κι αν προσπαθησα. Εν κατακλειδι πολυ καλη αποδοση πολυ δυνατο airflow και αναλογα ανεβαινει και ο θορυβος... Οποιος ενδιαφερεται πρωτα να μελετησει τις θεσεις του κουτιου..αν υπαρχουν θεσεις βιδων για 140αρη ανεμιστηρα..προτιμηστε τους κλασσικους τετραγωνους... Διαφορετικα αυτος ειναι πολυ καλος αλλα θα πρεπει να γινουν πατεντες πιθανοτα για να δουλεψει οπως πρεπει.
Very good airflow (5 degrees lower all over the PC) and silent. The RGB cable has, besides the part that goes into the motherboard, another one that allows you to add more RGB in case your motherboard doesn't have it. A small downside is that it doesn't have an airflow direction indicator, but it's not a big deal to add one and see it.
Πολύ καλή ροή αέρα (5 βαθμοί κάτω όλο το πισι) και αθόρυβοι. Το rgb καλώδειο έχει πέρα από το κομμάτι που μπαίνει στην μητρική, και ένα που σου επιτρέπει να βάλεις κι άλλα rgb για περίπτωση που δεν έχει η μητρική σου. Ένα μικρό μείον είναι ότι δεν έχει ένδειξη φοράς του αέρα αλλά δεν είναι και σπουδαίος κόπος να βάλεις έναν και να το δεις.