Purchase in 2021 with considerable use. Most likely a copy of the RT0702. Its base is useless, the cable is short, the numbers on the scale have faded. Well balanced and lightweight, good grip in the palm, good electronic speed control. The motor seems good so the base was replaced with the original Makita one and it is flawless, wherever you lock it, it stays. Definitely use quality cutters, I use CMT, they may be expensive but they are an investment because not only do they cut easily but they don't create as much vibration in the hand as lower quality ones. Mainly used as an edge trimmer, it works well on beech, oak, and chestnut. With care, it can also make mortises, I have only tried it on softwood. Having Makita rails, there is a base to work with the rail for greater stability. I don't know if I would buy this again or go for the Makita, but certainly the 8mm collet is convenient with the large router so you can have a set of 8mm cutters.

Powerful and easy-to-use tool. With a 2 to 3 millimeter increase in cutting depth, a little patience (I carved laminated beech), it was a pleasure to work with it.
I had carbide cutters. The reason I got this particular tool was that it includes ALL the chucks for all the cutters.

For its price, it's fine... be careful with the screw that adjusts the cutting height - depth, as it loosens from the vibrations and the setting gets messed up during operation. We just check it often and tighten it so that the collar is quite tight. It's not a heavy-duty tool but it has a powerful motor.

Quite a quality construction. It doesn't heat up even after a long time of continuous use.

The consumables need to be changed.

Very good for the price category. Important are the provided nests 6 6.3 8. I work with 8-inch cutters. If you choose the right speeds and don't push it, it's just fine.

For the money it costs, it's perfect, better than more expensive tools of its kind. Now, how long it will last will be shown by time

The router is amazing, quiet, user-friendly, and with the three extra bases it is fully versatile. I combined it with a plate, made a table, and have one base permanently screwed to the plate. Changes are made very quickly.

Very good for its price. Average build quality as expected for its cost (€45). Small, comfortable, and easy to use. It is not suitable for heavy use, of course. It is great for light and occasional use. It heats up very quickly and starts to burn your hands even on soft solid wood such as pine. You can also use it on denser woods like oak, but always be careful with the cutting depth and speed (feed and speed as they say in my village) because it is not meant for heavy-duty tasks. I used it with medium-quality cutting tools (this also plays an important role). Overall, it is commendable.

Amateur for the first time I made dovetails for small hinges. With very little effort, I managed to do it. This shows that the tool was easy to use. It cuts well.
Of course, guys, let's tell the truth, it also requires good front cutters. I bought a set for 60 euros from a specialized store. Good work and be careful!

Awesome tool, easy to adjust depth, very good construction, all metal, puts down several well-known brands of the same series

For amateur use, if someone uses it occasionally, it is decently reliable. However, in everyday use, it failed in the second month, the clip that secures it became crooked and the bullets fell out. Additionally, it gets stuck and does not go up or down for someone to adjust the depth of the cut. The motor, on the other hand, is perfectly powerful.

As expected, it does its job with dignity

It does not have a stable grip at the depth of the cutter and it slips, you cannot hold it. Not good at all. There are much more reliable routers available at this price.

good tool
in its positives: it has adapters for all three sizes, speed controller, parallel carving base which if you turn it upside down can also carve circularly, dust suction base, sturdy construction. I use it with einhell knives.

I have the cheap Makita M3700 (€67) and I also bought the Bulle to put it on a bench. No comparison between the two. Firstly, it doesn't tighten properly and you don't have accuracy in cutting depth. I was hoping that the very bad experience I had with a Bulle jigsaw was a coincidence. However, it seems that it wasn't. I will never buy from this company again.

Excellent tool!! Very sturdy, very powerful! And the unique thing is that it has adapters for all three cutting dimensions!!