Skroutz.mt

Bulle Welding Machine Inverter MIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 35%
Welding Machines

Bulle Welding Machine Inverter MIG / MMA / FCAW with Maximum Welding Current 200A and Duty Cycle 35%

Key features:

  • MIG & MMA Welding
  • With digital display
  • 2T/4T adjustment capability
  • Sturdy construction
  • Modern design
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
458 00 €
Delivery by Mon, 10 Aug
59,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (51)
5.0 (51 reviews)
Greece
See Tools on the page of MdTools
Product report

Description

Description

Capabilities

Inverter welding MMA / MIG from the manufacturer Bulle, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 3.5 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 18kg.

Specifications

  • Output MIG (35%): 200A
  • Output MMA (35%):160A
  • Voltage Adjustment (MIG): 15.5V - 24V
  • Voltage Adjustment (MMA): 20.8V - 26.4V
  • Wires: ∅0.6-0.8-1.0 mm (5 kg spool)
  • Electrode: ∅ max (mm): 4
  • Protection Degree: IP 21 S
  • Packaging Dimensions: 580x340x445 mm
  • Weight N/G: 18kg / 20kg

Comes with

  • Plasma Torch: 3m
  • Ground Clamp: 3m
  • Air Regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
18000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    2 out of 2 members found this review helpful
    Kostantinos_Darousis

    Awesome!!!

    Translated from Greek ·
    Did you find this review helpful?

Description & Specifications

Capabilities

Inverter welding MMA / MIG from the manufacturer Bulle, where the inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) or it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 3.5 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 18kg.

Specifications

  • Output MIG (35%): 200A
  • Output MMA (35%):160A
  • Voltage Adjustment (MIG): 15.5V - 24V
  • Voltage Adjustment (MMA): 20.8V - 26.4V
  • Wires: ∅0.6-0.8-1.0 mm (5 kg spool)
  • Electrode: ∅ max (mm): 4
  • Protection Degree: IP 21 S
  • Packaging Dimensions: 580x340x445 mm
  • Weight N/G: 18kg / 20kg

Comes with

  • Plasma Torch: 3m
  • Ground Clamp: 3m
  • Air Regulator

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
18000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
No
Anti Stick
No
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • 5
    2 out of 2 members found this review helpful
    Kostantinos_Darousis

    Awesome!!!

    Translated from Greek ·
    Did you find this review helpful?
458,00 €
59,00 €   shipping cost