Skroutz.mt

Krausmann Two-Stroke Gasoline Brush Cutter Shoulder / Hand
Brush Cutters

Krausmann Two-Stroke Gasoline Brush Cutter Shoulder / Hand

Key features:

  • With trimmer line and blade
  • With single shoulder strap
  • Lightweight construction
  • Features bicycle handle
See full description

  • Head Type

    Brush Cutter

    Disc mowers are suitable for more demanding tasks (thick grass, bushes, and small branches).


    They are not suitable for short grass as any impact with the ground/stones will wear out the disc.

  • Power Supply

    Gasoline (Two-Stroke)

    With petrol-powered lawnmowers, you can work for a considerable amount of time until you run out of petrol. Additionally, you can work remotely as they do not depend on sockets/wires and are ideal for rough grass, lawn, and shrubs.


    The two-stroke petrol engines require mixed oil with petrol for their proper functioning.


    Their price is more economical, and they usually have more revolutions compared to four-stroke engines, but they are noisier and have more vibrations and exhaust gases.

  • Weight

    The weight of the grass trimmer affects your comfort and fatigue, especially during tasks that last a long time.
  • Displacement 52 cc
  • Fuel Tank 1.2 lt
  • Horsepower 2.2 hp

  • Easy Start

    It is a technology that facilitates the starting of machines, reducing the required force for activation. Thus, it provides smooth and easy starting even for beginners.
  • Split Shaft
  • See all
Product report

You will also need

  • Nakayama LB1050 Mix Oil for Two-Stroke Engines (2T)

    Description

    Description

    The Krausmann 3170 is a two-stroke gasoline-powered shoulder/hand brush cutter, with a power of 2.2 horsepower and a weight of 6 kilograms. It is ideal for cutting grass and other plants in the garden or larger areas. It can be used either as a shoulder brush cutter for processing larger surfaces or as a hand brush cutter for cutting in narrower spaces or more difficult spots. With its lightweight construction and adjustable cutting height, it is also very comfortable to use.

    Specifications

    • Easy Start System
    • Fuel Supply Pump
    • Easy Access to Air Filter
    • Non-slip Handle
    • Engine Power: 1.82 kw
    • Engine Displacement: 52 cc
    • Engine Speed: 3000-8000 rpm
    • Fuel Tank: 1200 ml
    • Main Aluminum Shaft Tube: ø26 mm
    • Length (without Cutting Head): 1870 mm
    • Gasoline Mixture: 2-Stroke Engine Oil 25:1
    • Ignition: CDI
    • Noise Level: 114 dB
    • Weight: 5.5/6 kg



    Includes:

    • Cutting head
    • Shoulder strap
    • Tool kit
    • Mixing ratio bottle

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Product Details

    Product Type
    Shoulder / Hand

    Product Type

    Shoulder / Hand
    They offer flexibility and comfort, with an ergonomic design that allows for easy use both by hand and with shoulder support using the appropriate harness
    Power Source
    Gasoline (Two-Stroke)

    Power Source

    Gasoline (Two-Stroke)

    With petrol-powered lawnmowers, you can work for a considerable amount of time until you run out of petrol. Additionally, you can work remotely as they do not depend on sockets/wires and are ideal for rough grass, lawn, and shrubs.


    The two-stroke petrol engines require mixed oil with petrol for their proper functioning.


    Their price is more economical, and they usually have more revolutions compared to four-stroke engines, but they are noisier and have more vibrations and exhaust gases.
    Weight
    6 kg

    Weight

    The weight of the grass trimmer affects your comfort and fatigue, especially during tasks that last a long time.
    Handle
    Bike Handle
    Head Type
    Brush Cutter

    Head Type

    Brush Cutter

    Disc mowers are suitable for more demanding tasks (thick grass, bushes, and small branches).


    They are not suitable for short grass as any impact with the ground/stones will wear out the disc.
    Motordriving
    No

    Motordriving

    The most comfortable machines, as they have a gas and brake on their handles for movement. The operator only needs to steer without exerting any force.
    Remote controlled
    No

    Engine Specifications

    Cubism
    52 cc
    Horsepower
    2.2 hp
    Brushless
    No

    Brushless

    It refers to brushless motors, offering greater efficiency, less friction, and longer lifespan. They minimize maintenance and provide higher performance and runtime.
    Fuel Tank Capacity
    1.2 lt

    Battery Features

    Solo
    No

    Additional Features

    Easy Start
    Yes

    Easy Start

    It is a technology that facilitates the starting of machines, reducing the required force for activation. Thus, it provides smooth and easy starting even for beginners.
    Split Shaft
    Yes
    Telescopic Shaft
    No
    Anti-vibration
    No

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Reviews (8)

    Reviews

    2.6
    8
    2.6
    Review this product
    1. 2
    2. 1
    3. 1
    4. 1
    5. 3
    Review this product
    • Power
    • Starts easily
    • Weight
    • Somewhat tiring to use
    • Value for money
    • Are engine stops required?
    • Vibrations
    • Durability
    • THomas_Koliousis7821
      2
      THomas_Koliousis7821

      Verified purchase

      very poor quality as a machine you get what you pay for there are better quality ones for the money

      Translated from Greek ·
      • Power
      • Weight
      • Somewhat tiring to use
      • Starts with difficulty
      • Are engine stops required?
      • Durability
      • Value for money
      • Vibrations
      Did you find this review helpful?
    • panoskabal
      3
      1 out of 1 members found this review helpful
      panoskabal

      As a machine, it is good and powerful, but it requires a lot of attention, changes, and fixes such as: changing the head because the one it has is difficult and useless... You need to tighten all the screws and the carburetor because they loosen. You need to secure the handlebar and the head protective cover by making a hole and putting a small screw because they turn. Many times the throttle gets damaged... Several other minor things... Other than that, it is powerful, easy to move forward, and durable... I have had it for 4 years already... It is a cheap solution for amateur use and it needs fixes and to --fit your hands--

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Engine stops are not required
      • Somewhat tiring to use
      • Value for money
      • Durability
      • Vibrations
      Did you find this review helpful?
    • menis_64
      4
      1 out of 1 members found this review helpful
      menis_64

      The machine is very good, I have had it for about three years for amateur use... I changed the shoulder strap to a waist belt because its weight was tiring me. I also changed the cutting head with another one as its own was quite cheap and simple, resulting in the well-known tap&go not working and having to constantly stop the work. I have tried it with various cutting discs and it destroys them all depending on the vegetation... The machine does not require you to make stops, but I choose to make a stop approximately every 45 minutes... The only problem I would say exists is with the screws, as some of them come loose, I have also lost the screw from the air filter cover for the carburetor... Overall, it is a good machine that is suitable for amateur use.

      Translated from Greek ·
      • Starts easily
      • Engine stops are not required
      • Value for money
      • Power
      • Weight
      • Somewhat tiring to use
      • Durability
      • Vibrations
      Did you find this review helpful?
    • metsos
      1
      metsos

      Never buy this brand again.
      It dissolved in three hours of total use in three months.
      It cracked and broke and all the screws came loose

      Translated from Greek ·
      • Vibrations
      • Power
      • Weight
      • Starts with difficulty
      • Tiring to use
      • Are engine stops required?
      • Durability
      • Value for money
      Did you find this review helpful?
    • antonis84_windowslive_com
      5
      1 out of 2 members found this review helpful
      antonis84_windowslive_com

      After 1 year of operation with amateur use, the machine continues unstoppable. If it didn't have the little problems with the screws, it would be perfect. As a machine, it is worth its money. It had been idle for 4 months and started right away. I highly recommend it because it also has good support, which only a few companies do.

      Translated from Greek ·
      • Power
      • Starts easily
      • Effortless use
      • Weight
      • Durability
      • Value for money
      • Vibrations
      • Are engine stops required?
      Did you find this review helpful?
    • k_badouveris
      5
      2 out of 3 members found this review helpful
      k_badouveris

      In one hour of use, the screw in the carburetor came off for me too, the throttle had jammed. I fixed it myself by opening a larger throttle and using a larger M8 screw instead of M6. Since then, it hasn't had any other issues. A major advantage is that it easily accelerates.

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Effortless use
      • Value for money
      • Vibrations
      Did you find this review helpful?
    • xantosmanos
      1
      1 out of 1 members found this review helpful
      xantosmanos

      All problems from the first day, a screw on the carburetor broke and they replaced it, but the new one had the same issue

      Translated from Greek ·
      • Are certain engine stops required?
      • Vibrations
      • Power
      • Starts with moderate difficulty
      • Weight
      • Somewhat tiring to use
      • Durability
      • Value for money
      Did you find this review helpful?
    • xanthosms90
      1
      2 out of 3 members found this review helpful
      xanthosms90

      The screw of the carburetor intake broke in one hour. I gave it for repair under warranty and they returned it worse. Another hour of work and back to the company. Now I'm waiting to get it back to see what will happen. Generally, poor quality materials

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Effortless use
      • Vibrations
      • Are certain engine stops required?
      • Durability
      • Value for money
      Did you find this review helpful?
    • THomas_Koliousis7821
      2
      THomas_Koliousis7821

      very poor quality as a machine you get what you pay for there are better quality ones for the money

      Translated from Greek ·
      0
    • panoskabal
      3
      panoskabal

      As a machine, it is good and powerful, but it requires a lot of attention, changes, and fixes such as: changing the head because the one it has is difficult and useless... You need to tighten all the screws and the carburetor because they loosen. You need to secure the handlebar and the head protective cover by making a hole and putting a small screw because they turn. Many times the throttle gets damaged... Several other minor things... Other than that, it is powerful, easy to move forward, and durable... I have had it for 4 years already... It is a cheap solution for amateur use and it needs fixes and to --fit your hands--

      Translated from Greek ·
      1
    • menis_64
      4
      menis_64

      The machine is very good, I have had it for about three years for amateur use... I changed the shoulder strap to a waist belt because its weight was tiring me. I also changed the cutting head with another one as its own was quite cheap and simple, resulting in the well-known tap&go not working and having to constantly stop the work. I have tried it with various cutting discs and it destroys them all depending on the vegetation... The machine does not require you to make stops, but I choose to make a stop approximately every 45 minutes... The only problem I would say exists is with the screws, as some of them come loose, I have also lost the screw from the air filter cover for the carburetor... Overall, it is a good machine that is suitable for amateur use.

      Translated from Greek ·
      1
    • metsos
      1
      metsos

      Never buy this brand again.
      It dissolved in three hours of total use in three months.
      It cracked and broke and all the screws came loose

      Translated from Greek ·
      0
    • antonis84_windowslive_com
      5
      antonis84_windowslive_com

      After 1 year of operation with amateur use, the machine continues unstoppable. If it didn't have the little problems with the screws, it would be perfect. As a machine, it is worth its money. It had been idle for 4 months and started right away. I highly recommend it because it also has good support, which only a few companies do.

      Translated from Greek ·
      1
    • See all

    Description & Specifications

    The Krausmann 3170 is a two-stroke gasoline-powered shoulder/hand brush cutter, with a power of 2.2 horsepower and a weight of 6 kilograms. It is ideal for cutting grass and other plants in the garden or larger areas. It can be used either as a shoulder brush cutter for processing larger surfaces or as a hand brush cutter for cutting in narrower spaces or more difficult spots. With its lightweight construction and adjustable cutting height, it is also very comfortable to use.

    Specifications

    • Easy Start System
    • Fuel Supply Pump
    • Easy Access to Air Filter
    • Non-slip Handle
    • Engine Power: 1.82 kw
    • Engine Displacement: 52 cc
    • Engine Speed: 3000-8000 rpm
    • Fuel Tank: 1200 ml
    • Main Aluminum Shaft Tube: ø26 mm
    • Length (without Cutting Head): 1870 mm
    • Gasoline Mixture: 2-Stroke Engine Oil 25:1
    • Ignition: CDI
    • Noise Level: 114 dB
    • Weight: 5.5/6 kg



    Includes:

    • Cutting head
    • Shoulder strap
    • Tool kit
    • Mixing ratio bottle

    Manufacturer

    Manufacturer Details

    Warnings & Safety Information

    Product Details

    Product Type
    Shoulder / Hand

    Product Type

    Shoulder / Hand
    They offer flexibility and comfort, with an ergonomic design that allows for easy use both by hand and with shoulder support using the appropriate harness
    Power Source
    Gasoline (Two-Stroke)

    Power Source

    Gasoline (Two-Stroke)

    With petrol-powered lawnmowers, you can work for a considerable amount of time until you run out of petrol. Additionally, you can work remotely as they do not depend on sockets/wires and are ideal for rough grass, lawn, and shrubs.


    The two-stroke petrol engines require mixed oil with petrol for their proper functioning.


    Their price is more economical, and they usually have more revolutions compared to four-stroke engines, but they are noisier and have more vibrations and exhaust gases.
    Weight
    6 kg

    Weight

    The weight of the grass trimmer affects your comfort and fatigue, especially during tasks that last a long time.
    Handle
    Bike Handle
    Head Type
    Brush Cutter

    Head Type

    Brush Cutter

    Disc mowers are suitable for more demanding tasks (thick grass, bushes, and small branches).


    They are not suitable for short grass as any impact with the ground/stones will wear out the disc.
    Motordriving
    No

    Motordriving

    The most comfortable machines, as they have a gas and brake on their handles for movement. The operator only needs to steer without exerting any force.
    Remote controlled
    No

    Engine Specifications

    Cubism
    52 cc
    Horsepower
    2.2 hp
    Brushless
    No

    Brushless

    It refers to brushless motors, offering greater efficiency, less friction, and longer lifespan. They minimize maintenance and provide higher performance and runtime.
    Fuel Tank Capacity
    1.2 lt

    Battery Features

    Solo
    No

    Additional Features

    Easy Start
    Yes

    Easy Start

    It is a technology that facilitates the starting of machines, reducing the required force for activation. Thus, it provides smooth and easy starting even for beginners.
    Split Shaft
    Yes
    Telescopic Shaft
    No
    Anti-vibration
    No

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    Reviews (8)

    2.6
    8
    2.6
    Review this product
    1. 2
    2. 1
    3. 1
    4. 1
    5. 3
    Review this product
    • Power
    • Starts easily
    • Weight
    • Somewhat tiring to use
    • Value for money
    • Are engine stops required?
    • Vibrations
    • Durability
    • THomas_Koliousis7821
      2
      THomas_Koliousis7821

      Verified purchase

      very poor quality as a machine you get what you pay for there are better quality ones for the money

      Translated from Greek ·
      • Power
      • Weight
      • Somewhat tiring to use
      • Starts with difficulty
      • Are engine stops required?
      • Durability
      • Value for money
      • Vibrations
      Did you find this review helpful?
    • panoskabal
      3
      1 out of 1 members found this review helpful
      panoskabal

      As a machine, it is good and powerful, but it requires a lot of attention, changes, and fixes such as: changing the head because the one it has is difficult and useless... You need to tighten all the screws and the carburetor because they loosen. You need to secure the handlebar and the head protective cover by making a hole and putting a small screw because they turn. Many times the throttle gets damaged... Several other minor things... Other than that, it is powerful, easy to move forward, and durable... I have had it for 4 years already... It is a cheap solution for amateur use and it needs fixes and to --fit your hands--

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Engine stops are not required
      • Somewhat tiring to use
      • Value for money
      • Durability
      • Vibrations
      Did you find this review helpful?
    • menis_64
      4
      1 out of 1 members found this review helpful
      menis_64

      The machine is very good, I have had it for about three years for amateur use... I changed the shoulder strap to a waist belt because its weight was tiring me. I also changed the cutting head with another one as its own was quite cheap and simple, resulting in the well-known tap&go not working and having to constantly stop the work. I have tried it with various cutting discs and it destroys them all depending on the vegetation... The machine does not require you to make stops, but I choose to make a stop approximately every 45 minutes... The only problem I would say exists is with the screws, as some of them come loose, I have also lost the screw from the air filter cover for the carburetor... Overall, it is a good machine that is suitable for amateur use.

      Translated from Greek ·
      • Starts easily
      • Engine stops are not required
      • Value for money
      • Power
      • Weight
      • Somewhat tiring to use
      • Durability
      • Vibrations
      Did you find this review helpful?
    • metsos
      1
      metsos

      Never buy this brand again.
      It dissolved in three hours of total use in three months.
      It cracked and broke and all the screws came loose

      Translated from Greek ·
      • Vibrations
      • Power
      • Weight
      • Starts with difficulty
      • Tiring to use
      • Are engine stops required?
      • Durability
      • Value for money
      Did you find this review helpful?
    • antonis84_windowslive_com
      5
      1 out of 2 members found this review helpful
      antonis84_windowslive_com

      After 1 year of operation with amateur use, the machine continues unstoppable. If it didn't have the little problems with the screws, it would be perfect. As a machine, it is worth its money. It had been idle for 4 months and started right away. I highly recommend it because it also has good support, which only a few companies do.

      Translated from Greek ·
      • Power
      • Starts easily
      • Effortless use
      • Weight
      • Durability
      • Value for money
      • Vibrations
      • Are engine stops required?
      Did you find this review helpful?
    • k_badouveris
      5
      2 out of 3 members found this review helpful
      k_badouveris

      In one hour of use, the screw in the carburetor came off for me too, the throttle had jammed. I fixed it myself by opening a larger throttle and using a larger M8 screw instead of M6. Since then, it hasn't had any other issues. A major advantage is that it easily accelerates.

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Effortless use
      • Value for money
      • Vibrations
      Did you find this review helpful?
    • xantosmanos
      1
      1 out of 1 members found this review helpful
      xantosmanos

      All problems from the first day, a screw on the carburetor broke and they replaced it, but the new one had the same issue

      Translated from Greek ·
      • Are certain engine stops required?
      • Vibrations
      • Power
      • Starts with moderate difficulty
      • Weight
      • Somewhat tiring to use
      • Durability
      • Value for money
      Did you find this review helpful?
    • xanthosms90
      1
      2 out of 3 members found this review helpful
      xanthosms90

      The screw of the carburetor intake broke in one hour. I gave it for repair under warranty and they returned it worse. Another hour of work and back to the company. Now I'm waiting to get it back to see what will happen. Generally, poor quality materials

      Translated from Greek ·
      • Power
      • Starts easily
      • Weight
      • Effortless use
      • Vibrations
      • Are certain engine stops required?
      • Durability
      • Value for money
      Did you find this review helpful?
    • THomas_Koliousis7821
      2
      THomas_Koliousis7821

      very poor quality as a machine you get what you pay for there are better quality ones for the money

      Translated from Greek ·
      0
    • panoskabal
      3
      panoskabal

      As a machine, it is good and powerful, but it requires a lot of attention, changes, and fixes such as: changing the head because the one it has is difficult and useless... You need to tighten all the screws and the carburetor because they loosen. You need to secure the handlebar and the head protective cover by making a hole and putting a small screw because they turn. Many times the throttle gets damaged... Several other minor things... Other than that, it is powerful, easy to move forward, and durable... I have had it for 4 years already... It is a cheap solution for amateur use and it needs fixes and to --fit your hands--

      Translated from Greek ·
      1
    • menis_64
      4
      menis_64

      The machine is very good, I have had it for about three years for amateur use... I changed the shoulder strap to a waist belt because its weight was tiring me. I also changed the cutting head with another one as its own was quite cheap and simple, resulting in the well-known tap&go not working and having to constantly stop the work. I have tried it with various cutting discs and it destroys them all depending on the vegetation... The machine does not require you to make stops, but I choose to make a stop approximately every 45 minutes... The only problem I would say exists is with the screws, as some of them come loose, I have also lost the screw from the air filter cover for the carburetor... Overall, it is a good machine that is suitable for amateur use.

      Translated from Greek ·
      1
    • metsos
      1
      metsos

      Never buy this brand again.
      It dissolved in three hours of total use in three months.
      It cracked and broke and all the screws came loose

      Translated from Greek ·
      0
    • antonis84_windowslive_com
      5
      antonis84_windowslive_com

      After 1 year of operation with amateur use, the machine continues unstoppable. If it didn't have the little problems with the screws, it would be perfect. As a machine, it is worth its money. It had been idle for 4 months and started right away. I highly recommend it because it also has good support, which only a few companies do.

      Translated from Greek ·
      1
    • See all
    116,00 €
    44,00 €   shipping cost