Skroutz.mt

Monkey Banana Lemur 5 Studio Monitor Speakers 5.25" 110W Piece Red
Studio Monitor Speakers

Monkey Banana Lemur 5 Studio Monitor Speakers 5.25" 110W Piece Red

DSP processor with 6 presets. Hi-Fi speakers with 5 1/4" Kevlar diaphragm woofer and 1" aluminum dome tweeter. Frequency response: 55Hz – 30kHz. Crossover frequency: 2.8 kHz. Woofer converter: 80W and...

DSP processor with 6 presets. Hi-Fi speakers with 5 1/4" Kevlar diaphragm woofer and 1" aluminum dome tweeter. Frequency response: 55Hz – 30kHz. Crossover frequency: 2.8 kHz. Woofer converter: 80W and tweeter: 30W. HF/LF signal: 90dB / 95dB. Nominal power THD + N @ HF/LF: 0.05% / 0.02%. Inputs: XLR (Balanced), 6.3 mm TRS (Balanced), RCA (Unbalanced). Input...

See full description See full description
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

DSP processor with 6 presets. Hi-Fi speakers with 5 1/4" Kevlar diaphragm woofer and 1" aluminum dome tweeter. Frequency response: 55Hz – 30kHz. Crossover frequency: 2.8 kHz. Woofer converter: 80W and tweeter: 30W. HF/LF signal: 90dB / 95dB. Nominal power THD + N @ HF/LF: 0.05% / 0.02%. Inputs: XLR (Balanced), 6.3 mm TRS (Balanced), RCA (Unbalanced). Input impedance: 20 kOhm balanced, 10 kOhm unbalanced. Input sensitivity: +4 dBu balanced, -10 dBV unbalanced.

Weight: 4.45 kg. Dimensions: 215 x 190 x 277 mm. Color: Red.

  • Standby function: On/Off
  • Limiter function: On/Off
  • RCA inputs: 1
  • Set type: 2.0
  • Max frequency response: 30000 Hz

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Power (RMS)
110 W
Bass Driver
5.25 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
90 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
Frequency Response
55 - 30000 Hz

Frequency Response

Shows how accurately and evenly the speaker reproduces all frequencies. In studio monitors, the response is usually more “flat” (neutral), so the sound is delivered faithfully without boosting bass or treble, which is ideal for mixing and mastering.
DSP
Yes

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Piece
Type
Active

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Weight
4.45 kg
Colour
Red
Connectivity
1/4 TRS, RCA, XLR

Dimensions

Height
27.7 cm
Width
19 cm
Length
21.4 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

DSP processor with 6 presets. Hi-Fi speakers with 5 1/4" Kevlar diaphragm woofer and 1" aluminum dome tweeter. Frequency response: 55Hz – 30kHz. Crossover frequency: 2.8 kHz. Woofer converter: 80W and tweeter: 30W. HF/LF signal: 90dB / 95dB. Nominal power THD + N @ HF/LF: 0.05% / 0.02%. Inputs: XLR (Balanced), 6.3 mm TRS (Balanced), RCA (Unbalanced). Input impedance: 20 kOhm balanced, 10 kOhm unbalanced. Input sensitivity: +4 dBu balanced, -10 dBV unbalanced.

Weight: 4.45 kg. Dimensions: 215 x 190 x 277 mm. Color: Red.

  • Standby function: On/Off
  • Limiter function: On/Off
  • RCA inputs: 1
  • Set type: 2.0
  • Max frequency response: 30000 Hz

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Power (RMS)
110 W
Bass Driver
5.25 "

Bass Driver

The speaker that handles the low frequencies. It affects the depth, balance, and accuracy of the bass in the mix.
Max SPL
90 dB

Max SPL

The maximum sound level that the monitor can deliver without distortion, important for accurate listening at high volumes.
Driver Configuration
2 No of Drivers

Driver Configuration

The way the monitor divides frequencies among its speakers (e.g. 2-way or 3-way), for more accurate and clear reproduction.

2

The sound frequencies are reproduced by two speakers, a tweeter for the highs and a woofer for the lows.
Tweeter Size
1 "
Frequency Response
55 - 30000 Hz

Frequency Response

Shows how accurately and evenly the speaker reproduces all frequencies. In studio monitors, the response is usually more “flat” (neutral), so the sound is delivered faithfully without boosting bass or treble, which is ideal for mixing and mastering.
DSP
Yes

DSP

Digital signal processing that enhances the sound, automatically adjusts elements such as EQ, filters, or acoustic adaptation according to the space.

Main Specifications

Quantity
Piece
Type
Active

Type

Active: It has a built-in amplifier, you just connect it and it works. It is the most common choice for studio monitors.

Passive: Requires an external amplifier to operate. It offers greater flexibility in setup, but needs additional equipment.
Weight
4.45 kg
Colour
Red
Connectivity
1/4 TRS, RCA, XLR

Dimensions

Height
27.7 cm
Width
19 cm
Length
21.4 cm

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.