Skroutz.mt

Aerocool Hive ARGB v1 Gaming Midi Tower Computer Case with Side Window Black
Computer Cases

Aerocool Hive ARGB v1 Gaming Midi Tower Computer Case with Side Window Black

Design:

Form factor type: Midi Tower

Type: PC

Material:

  • Acrylonitrile Butadiene Styrene (ABS)
  • SPCC

Supported motherboard form factors:

  • ATX
  • Micro ATX
  • Mini-ITX

Number of drive bays:

  • 3.5 inches: 2
  • ...

Design:

Form factor type: Midi Tower

Type: PC

Material:

  • Acrylonitrile Butadiene Styrene (ABS)
  • SPCC

Supported motherboard form factors:

  • ATX
  • Micro ATX
  • Mini-ITX

Number of drive bays:

  • 3.5 inches: 2
  • 2.5 inches: 3

Number of expansion slots: 7

Maximum CPU cooler height: 157mm

Maximum graphics card length: 317mm

Maximum PSU length: 192mm

Power supply:

  • Power...
See full description See full description

  • Internal 3.5'' Bays

    Installation locations for hard drives of corresponding size (usually HDD).

  • Internal Ports 2.5''

    Installation locations for hard disks of corresponding size (usually SSDs).

  • Connectivity

    Audio

    Port for connecting headphones or speakers with a cable.

    Microphone

    Port for microphone with cable.

    USB 2.0

    Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

    USB 3.0

    Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.

  • Add-ons

    RGB Lighting

    Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

    Side Window

    It has a side window to make the interior visible without opening the case.
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

Design:

Form factor type: Midi Tower

Type: PC

Material:

  • Acrylonitrile Butadiene Styrene (ABS)
  • SPCC

Supported motherboard form factors:

  • ATX
  • Micro ATX
  • Mini-ITX

Number of drive bays:

  • 3.5 inches: 2
  • 2.5 inches: 3

Number of expansion slots: 7

Maximum CPU cooler height: 157mm

Maximum graphics card length: 317mm

Maximum PSU length: 192mm

Power supply:

  • Power supply included: No
  • Power supply position: Bottom
  • Supported power supply form factors: ATX

Connectivity:

  • Number of USB 2.0 ports: 1
  • Number of USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports: 2

Cooling:

  • Installed front fans: 2x 160 mm
  • Maximum front fans: 3
  • Supported front fan diameters: 160, 120, 140mm
  • Installed rear fans: 1x 120 mm
  • Maximum rear fans: 1
  • Supported rear fan diameters: 120mm
  • Maximum top fans: 2
  • Supported top fan diameters: 120mm
  • Maximum bottom fans: 2
  • Supported bottom fan diameters: 120mm
  • Liquid cooling capability: No
  • Supported front radiator sizes: 120, 240, 360mm
  • Supported rear radiator sizes: 120mm

Storage:

  • Supported hard drive sizes: 2.5, 3.5"

Weight and dimensions:

  • Width: 206mm
  • Depth: 380mm
  • Height: 457mm
  • Material thickness: 0.5mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Colour
Black
Size
Midi Tower

Size

Midi Tower

The most popular size of case. Provides space and flexibility for simple or demanding use. Accommodates ATX and micro ATX motherboards.
Compatible Motherboard Type
ATX, Mini ITX, Micro ATX

Compatible Motherboard Type

The sizes of the motherboards that fit in the case.

Dimensions

Height
440 mm
Width
200 mm
Length
335 mm

Internal Spaces

Maximum Graphics Card Length
317 mm
Maximum Processor Heatsink Height
157 mm

Drive Bays

Internal Hub 3.5"
2

Internal Hub 3.5"

Installation locations for hard drives of corresponding size (usually HDD).
Internal Hub 2.5"
3

Internal Hub 2.5"

Installation locations for hard disks of corresponding size (usually SSDs).

Fan Positions

Front
3
Rear
1
Top Positions
2

Water Cooling

Radiator Position
Front, Back

Radiator Position

At which point of the box is there a socket for installing a water-cooled refrigerator? This is for experienced users who want to install such a cooling system.

Specifications

Connectivity
Audio, Microphone, USB 2.0, USB 3.0

Connectivity

Audio
Port for connecting headphones or speakers with a cable.
Microphone

Port for microphone with cable.

USB 2.0

Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

USB 3.0
Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.
Extras
RGB Lighting, Side Window, Pre-installed Fans

Extras

RGB Lighting

Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

Side Window

It has a side window to make the interior visible without opening the case.
Gaming
Yes
Airflow
Yes
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Giorgos_Seferis
    3
    3 out of 3 members found this review helpful
    Giorgos_Seferis

    Verified purchase

    The product was purchased for 72€. Its build quality is not the best. It bent in many places (under the PSU and on the back panel) on the first day. The screws on the back are not screws, but you have to break them to remove them. It's worth mentioning that the cable management space is very minimal (I struggled to close the back panel).

    It has good dust filters and the fans do their job (it comes with 2 160mm fans and 1 120mm fan). However, as a first-time builder, I had difficulty figuring out their cables.

    As for the dust filters, to clean the front filter, you have to remove the entire front panel, which means you have to disconnect all the cables. Additionally, the filter for the PSU is not magnetic, but it is held in place by protrusions on the case.

    P.S. The standoffs for the motherboard were very difficult to install

    Translated from Greek ·
    • Dust filtering
    • Moderate noise
    • Air flow
    • Space
    • Cable management
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • Giorgos_Seferis
    3
    Giorgos_Seferis

    The product was purchased for 72€. Its build quality is not the best. It bent in many places (under the PSU and on the back panel) on the first day. The screws on the back are not screws, but you have to break them to remove them. It's worth mentioning that the cable management space is very minimal (I struggled to close the back panel).

    It has good dust filters and the fans do their job (it comes with 2 160mm fans and 1 120mm fan). However, as a first-time builder, I had difficulty figuring out their cables.

    As for the dust filters, to clean the front filter, you have to remove the entire front panel, which means you have to disconnect all the cables. Additionally, the filter for the PSU is not magnetic, but it is held in place by protrusions on the case.

    P.S. The standoffs for the motherboard were very difficult to install

    Translated from Greek ·
    3
  • See all

Description & Specifications

Main Specifications

Colour
Black
Size
Midi Tower

Size

Midi Tower

The most popular size of case. Provides space and flexibility for simple or demanding use. Accommodates ATX and micro ATX motherboards.
Compatible Motherboard Type
ATX, Mini ITX, Micro ATX

Compatible Motherboard Type

The sizes of the motherboards that fit in the case.

Dimensions

Height
440 mm
Width
200 mm
Length
335 mm

Internal Spaces

Maximum Graphics Card Length
317 mm
Maximum Processor Heatsink Height
157 mm

Drive Bays

Internal Hub 3.5"
2

Internal Hub 3.5"

Installation locations for hard drives of corresponding size (usually HDD).
Internal Hub 2.5"
3

Internal Hub 2.5"

Installation locations for hard disks of corresponding size (usually SSDs).

Fan Positions

Front
3
Rear
1
Top Positions
2

Water Cooling

Radiator Position
Front, Back

Radiator Position

At which point of the box is there a socket for installing a water-cooled refrigerator? This is for experienced users who want to install such a cooling system.

Specifications

Connectivity
Audio, Microphone, USB 2.0, USB 3.0

Connectivity

Audio
Port for connecting headphones or speakers with a cable.
Microphone

Port for microphone with cable.

USB 2.0

Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

USB 3.0
Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.
Extras
RGB Lighting, Side Window, Pre-installed Fans

Extras

RGB Lighting

Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

Side Window

It has a side window to make the interior visible without opening the case.
Gaming
Yes
Airflow
Yes
Home & Office
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Description

Design:

Form factor type: Midi Tower

Type: PC

Material:

  • Acrylonitrile Butadiene Styrene (ABS)
  • SPCC

Supported motherboard form factors:

  • ATX
  • Micro ATX
  • Mini-ITX

Number of drive bays:

  • 3.5 inches: 2
  • 2.5 inches: 3

Number of expansion slots: 7

Maximum CPU cooler height: 157mm

Maximum graphics card length: 317mm

Maximum PSU length: 192mm

Power supply:

  • Power supply included: No
  • Power supply position: Bottom
  • Supported power supply form factors: ATX

Connectivity:

  • Number of USB 2.0 ports: 1
  • Number of USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports: 2

Cooling:

  • Installed front fans: 2x 160 mm
  • Maximum front fans: 3
  • Supported front fan diameters: 160, 120, 140mm
  • Installed rear fans: 1x 120 mm
  • Maximum rear fans: 1
  • Supported rear fan diameters: 120mm
  • Maximum top fans: 2
  • Supported top fan diameters: 120mm
  • Maximum bottom fans: 2
  • Supported bottom fan diameters: 120mm
  • Liquid cooling capability: No
  • Supported front radiator sizes: 120, 240, 360mm
  • Supported rear radiator sizes: 120mm

Storage:

  • Supported hard drive sizes: 2.5, 3.5"

Weight and dimensions:

  • Width: 206mm
  • Depth: 380mm
  • Height: 457mm
  • Material thickness: 0.5mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Reviews (1)

3.0
1
3.0
Review this product
  1. 5 stars
    0
  2. 4 stars
    0
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Giorgos_Seferis
    3
    3 out of 3 members found this review helpful
    Giorgos_Seferis

    Verified purchase

    The product was purchased for 72€. Its build quality is not the best. It bent in many places (under the PSU and on the back panel) on the first day. The screws on the back are not screws, but you have to break them to remove them. It's worth mentioning that the cable management space is very minimal (I struggled to close the back panel).

    It has good dust filters and the fans do their job (it comes with 2 160mm fans and 1 120mm fan). However, as a first-time builder, I had difficulty figuring out their cables.

    As for the dust filters, to clean the front filter, you have to remove the entire front panel, which means you have to disconnect all the cables. Additionally, the filter for the PSU is not magnetic, but it is held in place by protrusions on the case.

    P.S. The standoffs for the motherboard were very difficult to install

    Translated from Greek ·
    • Dust filtering
    • Moderate noise
    • Air flow
    • Space
    • Cable management
    • Construction quality
    • Value for money
    Did you find this review helpful?
  • Giorgos_Seferis
    3
    Giorgos_Seferis

    The product was purchased for 72€. Its build quality is not the best. It bent in many places (under the PSU and on the back panel) on the first day. The screws on the back are not screws, but you have to break them to remove them. It's worth mentioning that the cable management space is very minimal (I struggled to close the back panel).

    It has good dust filters and the fans do their job (it comes with 2 160mm fans and 1 120mm fan). However, as a first-time builder, I had difficulty figuring out their cables.

    As for the dust filters, to clean the front filter, you have to remove the entire front panel, which means you have to disconnect all the cables. Additionally, the filter for the PSU is not magnetic, but it is held in place by protrusions on the case.

    P.S. The standoffs for the motherboard were very difficult to install

    Translated from Greek ·
    3
  • See all