I have another Italian incubator but this Borman one does not reach the temperature indicated by the precise thermometer. I have taken measurements and it shows that it only goes up to 35.7 degrees Celsius, while the thermostat setting is 39.5 degrees Celsius. I say this from experience because I know about egg incubators. In other words, the machine shows a reading of 39.5 degrees while the actual temperature is 35.7. Note that both sensors are placed together in the same position. I now think that the problem may be with the sensor. I will change it and see. I don't know if it hatches birds, but I also notice a weakness in the heating cable, as it does not produce enough heat. I will provide updates later. In any case, I do not recommend it for beginners. I will update on Saturday, March 4th at 23:00.
I changed the sensor in the machine as I couldn't find the same one, and I adjusted the factory settings. Now the machine works properly with an external hygrometer. However, the temperatures shown on the dial have no relation to the actual temperatures. For example, it operates at 22.5 degrees Celsius for me, while it should be 37.7 degrees Celsius as shown in the pictures. We will see in a few days if the whole problem is with the sensor. I will provide an update.
I am back on March 26th, 2023. The machine hatched birds. I found the exact temperature sensor and replaced it. Everything is fine now. Good luck to everyone, and don't forget to make four small holes, for example with an octagonal drill, on the yellow cover on the sides in the four corners to allow for ventilation because it retained too much moisture. The success rate was 70%, and now the eggs also play a role.
I am back on May 1st, 2023. Everything was fixed with the replacement of the temperature sensor. I have hatched over 100 birds. I believe it was a batch defect with the sensor. Good luck to everyone. The good thing about this machine is that when I checked and found infertile eggs, I replaced them and there were no issues along the way.
Έχω καί άλλη ιταλική κλωσομηχανη αλλά αυτή εδώ borman δεν ανεβάζει θερμοκρασία με θερμόμετρο ακριβείας κάνω μετρήσεις και δείχνει να πηγαίνει μέχρι 35,7 κελσίου καί η ρύθμιση τού θερμοστάτη της είναι 39,5 κελσίου για να φτάσει εκεί δεν φτάνει . αυτά τα λέω εκ πείρας γιατί ξέρω από μηχανές αυγών . δηλαδή η μηχανή δείχνει ένδειξη 39.5 ενώ πραγματική είναι 35.7 σημείωση ότι και οι δύο αισθητήρες είναι πιασμένοι μαζί στην ίδια θέση , λέω τώρα ίσως το πρόβλημα να είναι στον αισθητήρα . θα τον αλλάξω καί βλέπουμε .δεν ξέρω αν βγάλει πουλιά ενώ παρατηρω αδυναμία καί στο θερμοκαλώδιο δεν παράγει αρκετή θέρμανση .θα επανέλθω με νεότερα . πάντως δεν την προτείνω σε αρχάριους θα επανέλθω.
Επανέρχομαι Σάββατο 4 Μαρτίου 23.
άλλαξα στην μηχανή αισθητήρα δεν έβρισκα τον ίδιο καί πείραξα τις εργοστασιακές ρυθμίσεις τώρα η μηχανή λειτουργεί κανονικά με εξωτερικό υγρασιοθερμομετρο βέβαια οι θερμοκρασίες πού δείχνει στο καντράν δεν έχουν καμία σχέση πχ σε εμένα λειτουργει στο 22.5 C κελσίου καί κανονικά έχει 37,7 C όπως δείχνουν οι φωτογραφίες. τελικά θα δούμε σε λίγες μέρες αν το όλο πρόβλημα είναι ο αισθητήρας θα επανέλθω.
επανέρχομαι 26/03/23 λοιπόν η μηχανή έβγαλε πουλιά βρήκα τον ακριβή αισθητήρα θερμοκρασίας τον αντικατέστησα όλα καλά καλή επιτυχία σε όλους καί μην ξεχάσω κάνετε και τέσσερις μικρές τρύπες πχ με οκταρι τρυπάνι επάνω στο κίτρινο καπάκι στα πλάγια στις τέσσερις γωνίες για να αερίζεται γιατί κρατούσε πολύ υγρασία. Η επιτυχία ήταν στο 70% τώρα παίζουν ρόλο και τα αυγά .
Επανέρχομαι
01/05/2023 ολα διορθώθηκαν με την αντικατάσταση του αισθητήρα θερμοκρασίας
έχω βγάλει πάνω από 100 πουλιά πιστεύω οτι ηταν αστοχία παρτίδας αισθητήρα καλή επιτυχία σε όλους. το καλό με αυτή την μηχανή είναι ότι όταν έκανα έλεγχο και έβρισκα αυγά άγονα τα αντικαθιστούσα καί δεν υπήρχε κανένα πρόβλημα στην πορεία .