Image from a review
Image from a review

Aerocool Hive FRGB v3 Gaming Midi Tower Computer Case with Side Window Black

Name: Aerocool Hive FRGB v3 Gaming Midi Tower Computer Case with Side Window Black
Brand: Aerocool
SKU: 24945113
Price: 48.68 EUR
Availability: InStock
Rating: 4.6 (11 reviews)

Key features:

Motherboards: ATX, Mini ITX, Micro ATX
USB 2.0 - USB 3.0
Audio - Microphone
Side Window
RGB Lighting
Radiator Position: Front, Rear

See full description

Internal 3.5'' Bays

Installation locations for hard drives of corresponding size (usually HDD).
Internal Ports 2.5''

Installation locations for hard disks of corresponding size (usually SSDs).
Connectivity

Audio

Port for connecting headphones or speakers with a cable.

Microphone

Port for microphone with cable.

USB 2.0

Older version, compatible with almost all devices but with slower data transfer speed (480Mbit/s.) compared to newer versions.

USB 3.0

Faster data transfer (5 Gbit/s) than USB 2.0. Compatible with older versions. Also referred to as USB 3.1 Gen 1 / 3.2 Gen 1.
Add-ons

RGB Lighting

Boxes with integrated RGB multi-color lighting. The RGB lighting can take on various shades by combining the colors red, green, and blue, offering a modern aesthetic result commonly seen in gaming computers.

Side Window

It has a side window to make the interior visible without opening the case.
See all

48 68 €

Delivery Fri, 26 Jun - Thu, 02 Jul

38,00 € shipping cost

Sent from Greece

From Visionstudio 4.8 (57)

4.8 (57 reviews)

Greece

2 pieces

See Computer Hardware on the page of Visionstudio

Description

The Hive FRGB v3 by Aerocool is a Midi Tower, suitable for the most popular builds and ideal for gamers. It features a side window for visibility of the interior without opening the case, as well as built-in multi-color RGB lighting.

Manufacturer

Aerocool - Computer Cases Aerocool

See full description

Specifications

Main Specifications

Colour: Black

Size: Midi Tower

Compatible Motherboard Type: ATX, Mini ITX, Micro ATX

Dimensions

Height: 457 mm

Width: 206 mm

Length: 380 mm

Internal Spaces

Maximum Graphics Card Length: 317 mm

Maximum Processor Heatsink Height: 157 mm

Drive Bays

Internal Hub 3.5": 2

Internal Hub 2.5": 3

Fan Positions

Front: 3

Rear: 1

Top Positions: 2

Water Cooling

Radiator Position: Front, Back

Specifications

Connectivity: Audio, Microphone, USB 2.0, USB 3.0

Extras: RGB Lighting, Side Window, Pre-installed Fans

Gaming: Yes

Airflow: Yes

Home & Office: No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (11)

Reviews

4.6

4.6

Review this product

7
4
3 stars

0
2 stars

0
1 star

0

Review this product

Value for money
Silent
Space
Cable management
Construction quality
Air flow
Dust filtering

Reviews photos

5

7 out of 8 members found this review helpful

Some_Random_Guy_666_whatareudo
2023-01-17

Verified purchase
Awesome box for €40, okay maybe the build quality is not like Corsair and NZXT but it has:
- dust filters, bottom for the PSU, top and front
- side panel made of tempered glass!
- a cage for 2 HDDs and slots to screw in 2 SSDs
- fits a cooler and relatively large cards but not very large cards with 3 fans unfortunately
- enough space to close the back panel for cables
- comes with an FRGB Aerocool fan (molex)

generally a very decent box for its price, for those who want to spend that extra money on other components instead of getting a €140 Corsair box for example, this one is more than enough for a mid-range build, and with very good airflow because it has holes in the front
perhaps the best box for this price compared to other boxes on the market.

Translated from Greek ·
- Dust filtering
- Air flow
- Value for money
- Space
- Cable management
- Construction quality
Did you find this review helpful?
4

1 out of 2 members found this review helpful

Captainlag
2022-02-03
With this case, I made my first build and I consider it beautiful and worth its money. Its price is what defines it and let me explain.... It doesn't claim quality laurels, as the plastic front is hard plastic and one of the support clips for the metal case has already broken. It also comes with only one fan which has a MOLEX connection and is therefore almost useless. It would be better if it didn't have it and they deducted its cost from the price!
The spaces inside the case are very good considering it is a midi case. Its great advantage is that the level on which the motherboard is supported is flat, completely flat without steps that create space for SSD SATA drives on the back side. With this flat configuration, it can accommodate large graphics cards and also if the motherboard has horizontal sockets, the plugs that will connect to them fit without any problem. In other cases that are much more popular than this one, there is a serious issue with the motherboard sockets (look in another case for my evaluation).
Also, the space for the power supply is very satisfactory, while there is space and enough slots to tie the cables in order to achieve a neat cabling management.
In conclusion, with a price around €35, I consider it the most value-for-money case on the market. Add another €50 and buy a set of A-RGB fans and you have the perfect air flow with dynamic control of both the air flow and the lighting.

Translated from Greek ·
- Space
- Cable management
- Silent
- Air flow
- Value for money
- Construction quality
- Dust filtering
Did you find this review helpful?
5

6 out of 6 members found this review helpful

spiridon.jets
2021-12-25

Verified purchase
Here you are! Don't search anymore. The best value for money case! Very good material and lightweight. It came with magnetic RGB fan filters. With many screws, blades, tie wraps, etc. Very good cable management. The space is very good and gives you a good 'hand' to connect everything. I have never reviewed Scroutz before, but this time I was amazed by the quality I received, especially considering what I paid. The airflow is excellent, with space for water cooling or up to 8-9 fans. The window is real glass! Top!

Translated from Greek ·
- Space
- Cable management
- Construction quality
- Silent
- Dust filtering
- Air flow
- Value for money
Did you find this review helpful?
4

5 out of 5 members found this review helpful

JDeviant_Black
2021-11-30

Verified purchase
After setting it up (see photo) ..four stars.
- I start with the packaging that has foam latex, which is more resistant to holding it and not the fake material that crumbles and is not so durable. +1 for this alone. It also comes with packaging and screws for the motherboard, etc. It does NOT have screws for fans.
- It comes with a RGB (rainbow style) 120mm fan at the back, which is beautiful and quite bright, BUT 1) it is Molex 2) if you put it in the front, it is not as visible through the mesh that the case has (but I preferred it over it 'glowing' at the back and ruining the overall look.
- It has a magnetic filter on top, and a simple filter for the power supply at the bottom. Also, the entire 'floor' from the PSU shroud is 'perforated' for more airflow (maybe it can fit 80-120mm fans with a trick if you want extra cooling).
- At the back, it easily fits one HDD and one SSD on top. In the front, there is no space for a 2.5" disk no matter what they say.
- I liked that it is tall and compact so that it sits nicely and 'fills' the eye even with uATX/mATX motherboards. With ATX, it may look even better, of course.
- It has glass, be careful to always lay the PC down to install/remove it, otherwise it will fall off.
Overall, a quite satisfactory impression, I would recommend it for up to 50 euros in total, and not more, for a build with a cost of 500-800 euros. With two extra fans in the front and one in the back, you have very good airflow. I would recommend it

Translated from Greek ·
- Dust filtering
Did you find this review helpful?
5

11 out of 11 members found this review helpful

Νίκος Γαλ
2020-11-06
VFM box from aerocool, 3 USB ports on the top, whoever wants to use it for air cooling, it has full air flow, I use it with 3 120mm fans in the front and 2 on top, stable temperature +/-1, comfortably fits ATX motherboards, graphics cards up to 300+mm.

Translated from Greek ·
- Space
- Cable management
- Construction quality
- Silent
- Air flow
- Value for money
- Dust filtering
Did you find this review helpful?
4

4 out of 4 members found this review helpful

insidergr
2021-05-10
Sympathetic for its price, it came to me without the RGB fan so be careful..

Translated from Greek ·
- Construction quality
- Value for money
- Space
- Cable management
- Dust filtering
- Air flow
Did you find this review helpful?
5

dschino
2026-01-13

Verified purchase
4

Giannis_Tektonidis
2025-08-03

Verified purchase
5

A_C_E
2025-07-15

Verified purchase
5

gorgi.georgii
2023-10-26

Verified purchase
- Space
- Cable management
- Construction quality
- Silent
- Dust filtering
- Air flow
- Value for money
5

alexandros.kasimatis.98
2021-05-11

Verified purchase
- Space
- Cable management
- Construction quality
- Dust filtering
- Value for money
- Moderate noise
- Air flow

5

Some_Random_Guy_666_whatareudo
2023-01-17

Awesome box for €40, okay maybe the build quality is not like Corsair and NZXT but it has:
- dust filters, bottom for the PSU, top and front
- side panel made of tempered glass!
- a cage for 2 HDDs and slots to screw in 2 SSDs
- fits a cooler and relatively large cards but not very large cards with 3 fans unfortunately
- enough space to close the back panel for cables
- comes with an FRGB Aerocool fan (molex)

generally a very decent box for its price, for those who want to spend that extra money on other components instead of getting a €140 Corsair box for example, this one is more than enough for a mid-range build, and with very good airflow because it has holes in the front
perhaps the best box for this price compared to other boxes on the market.

Translated from Greek ·

7
4

Captainlag
2022-02-03

With this case, I made my first build and I consider it beautiful and worth its money. Its price is what defines it and let me explain.... It doesn't claim quality laurels, as the plastic front is hard plastic and one of the support clips for the metal case has already broken. It also comes with only one fan which has a MOLEX connection and is therefore almost useless. It would be better if it didn't have it and they deducted its cost from the price!
The spaces inside the case are very good considering it is a midi case. Its great advantage is that the level on which the motherboard is supported is flat, completely flat without steps that create space for SSD SATA drives on the back side. With this flat configuration, it can accommodate large graphics cards and also if the motherboard has horizontal sockets, the plugs that will connect to them fit without any problem. In other cases that are much more popular than this one, there is a serious issue with the motherboard sockets (look in another case for my evaluation).
Also, the space for the power supply is very satisfactory, while there is space and enough slots to tie the cables in order to achieve a neat cabling management.
In conclusion, with a price around €35, I consider it the most value-for-money case on the market. Add another €50 and buy a set of A-RGB fans and you have the perfect air flow with dynamic control of both the air flow and the lighting.

Translated from Greek ·

1
5

spiridon.jets
2021-12-25

Here you are! Don't search anymore. The best value for money case! Very good material and lightweight. It came with magnetic RGB fan filters. With many screws, blades, tie wraps, etc. Very good cable management. The space is very good and gives you a good 'hand' to connect everything. I have never reviewed Scroutz before, but this time I was amazed by the quality I received, especially considering what I paid. The airflow is excellent, with space for water cooling or up to 8-9 fans. The window is real glass! Top!

Translated from Greek ·

6
4

JDeviant_Black
2021-11-30

After setting it up (see photo) ..four stars.
- I start with the packaging that has foam latex, which is more resistant to holding it and not the fake material that crumbles and is not so durable. +1 for this alone. It also comes with packaging and screws for the motherboard, etc. It does NOT have screws for fans.
- It comes with a RGB (rainbow style) 120mm fan at the back, which is beautiful and quite bright, BUT 1) it is Molex 2) if you put it in the front, it is not as visible through the mesh that the case has (but I preferred it over it 'glowing' at the back and ruining the overall look.
- It has a magnetic filter on top, and a simple filter for the power supply at the bottom. Also, the entire 'floor' from the PSU shroud is 'perforated' for more airflow (maybe it can fit 80-120mm fans with a trick if you want extra cooling).
- At the back, it easily fits one HDD and one SSD on top. In the front, there is no space for a 2.5" disk no matter what they say.
- I liked that it is tall and compact so that it sits nicely and 'fills' the eye even with uATX/mATX motherboards. With ATX, it may look even better, of course.
- It has glass, be careful to always lay the PC down to install/remove it, otherwise it will fall off.
Overall, a quite satisfactory impression, I would recommend it for up to 50 euros in total, and not more, for a build with a cost of 500-800 euros. With two extra fans in the front and one in the back, you have very good airflow. I would recommend it

Translated from Greek ·

5
5

Νίκος Γαλ
2020-11-06

VFM box from aerocool, 3 USB ports on the top, whoever wants to use it for air cooling, it has full air flow, I use it with 3 120mm fans in the front and 2 on top, stable temperature +/-1, comfortably fits ATX motherboards, graphics cards up to 300+mm.

Translated from Greek ·

11
See all

Reviews by our members

Most recent
Most helpful

5

7 out of 8 members found this review helpful

Some_Random_Guy_666_whatareudo
2023-01-17

Verified purchase
Awesome box for €40, okay maybe the build quality is not like Corsair and NZXT but it has:
- dust filters, bottom for the PSU, top and front
- side panel made of tempered glass!
- a cage for 2 HDDs and slots to screw in 2 SSDs
- fits a cooler and relatively large cards but not very large cards with 3 fans unfortunately
- enough space to close the back panel for cables
- comes with an FRGB Aerocool fan (molex)

generally a very decent box for its price, for those who want to spend that extra money on other components instead of getting a €140 Corsair box for example, this one is more than enough for a mid-range build, and with very good airflow because it has holes in the front
perhaps the best box for this price compared to other boxes on the market.

Translated from Greek ·
- Dust filtering
- Air flow
- Value for money
- Space
- Cable management
- Construction quality
Did you find this review helpful?
4

1 out of 2 members found this review helpful

Captainlag
2022-02-03
With this case, I made my first build and I consider it beautiful and worth its money. Its price is what defines it and let me explain.... It doesn't claim quality laurels, as the plastic front is hard plastic and one of the support clips for the metal case has already broken. It also comes with only one fan which has a MOLEX connection and is therefore almost useless. It would be better if it didn't have it and they deducted its cost from the price!
The spaces inside the case are very good considering it is a midi case. Its great advantage is that the level on which the motherboard is supported is flat, completely flat without steps that create space for SSD SATA drives on the back side. With this flat configuration, it can accommodate large graphics cards and also if the motherboard has horizontal sockets, the plugs that will connect to them fit without any problem. In other cases that are much more popular than this one, there is a serious issue with the motherboard sockets (look in another case for my evaluation).
Also, the space for the power supply is very satisfactory, while there is space and enough slots to tie the cables in order to achieve a neat cabling management.
In conclusion, with a price around €35, I consider it the most value-for-money case on the market. Add another €50 and buy a set of A-RGB fans and you have the perfect air flow with dynamic control of both the air flow and the lighting.

Translated from Greek ·
- Space
- Cable management
- Silent
- Air flow
- Value for money
- Construction quality
- Dust filtering
Did you find this review helpful?
5

6 out of 6 members found this review helpful

spiridon.jets
2021-12-25

Verified purchase
Here you are! Don't search anymore. The best value for money case! Very good material and lightweight. It came with magnetic RGB fan filters. With many screws, blades, tie wraps, etc. Very good cable management. The space is very good and gives you a good 'hand' to connect everything. I have never reviewed Scroutz before, but this time I was amazed by the quality I received, especially considering what I paid. The airflow is excellent, with space for water cooling or up to 8-9 fans. The window is real glass! Top!

Translated from Greek ·
- Space
- Cable management
- Construction quality
- Silent
- Dust filtering
- Air flow
- Value for money
Did you find this review helpful?
4

5 out of 5 members found this review helpful

JDeviant_Black
2021-11-30

Verified purchase
After setting it up (see photo) ..four stars.
- I start with the packaging that has foam latex, which is more resistant to holding it and not the fake material that crumbles and is not so durable. +1 for this alone. It also comes with packaging and screws for the motherboard, etc. It does NOT have screws for fans.
- It comes with a RGB (rainbow style) 120mm fan at the back, which is beautiful and quite bright, BUT 1) it is Molex 2) if you put it in the front, it is not as visible through the mesh that the case has (but I preferred it over it 'glowing' at the back and ruining the overall look.
- It has a magnetic filter on top, and a simple filter for the power supply at the bottom. Also, the entire 'floor' from the PSU shroud is 'perforated' for more airflow (maybe it can fit 80-120mm fans with a trick if you want extra cooling).
- At the back, it easily fits one HDD and one SSD on top. In the front, there is no space for a 2.5" disk no matter what they say.
- I liked that it is tall and compact so that it sits nicely and 'fills' the eye even with uATX/mATX motherboards. With ATX, it may look even better, of course.
- It has glass, be careful to always lay the PC down to install/remove it, otherwise it will fall off.
Overall, a quite satisfactory impression, I would recommend it for up to 50 euros in total, and not more, for a build with a cost of 500-800 euros. With two extra fans in the front and one in the back, you have very good airflow. I would recommend it

Translated from Greek ·
- Dust filtering
Did you find this review helpful?
5

11 out of 11 members found this review helpful

Νίκος Γαλ
2020-11-06
VFM box from aerocool, 3 USB ports on the top, whoever wants to use it for air cooling, it has full air flow, I use it with 3 120mm fans in the front and 2 on top, stable temperature +/-1, comfortably fits ATX motherboards, graphics cards up to 300+mm.

Translated from Greek ·
- Space
- Cable management
- Construction quality
- Silent
- Air flow
- Value for money
- Dust filtering
Did you find this review helpful?
4

4 out of 4 members found this review helpful

insidergr
2021-05-10
Sympathetic for its price, it came to me without the RGB fan so be careful..

Translated from Greek ·
- Construction quality
- Value for money
- Space
- Cable management
- Dust filtering
- Air flow
Did you find this review helpful?
5

dschino
2026-01-13

Verified purchase
4

Giannis_Tektonidis
2025-08-03

Verified purchase
5

A_C_E
2025-07-15

Verified purchase
5

gorgi.georgii
2023-10-26

Verified purchase
- Space
- Cable management
- Construction quality
- Silent
- Dust filtering
- Air flow
- Value for money
5

alexandros.kasimatis.98
2021-05-11

Verified purchase
- Space
- Cable management
- Construction quality
- Dust filtering
- Value for money
- Moderate noise
- Air flow

5

Some_Random_Guy_666_whatareudo
2023-01-17

Awesome box for €40, okay maybe the build quality is not like Corsair and NZXT but it has:
- dust filters, bottom for the PSU, top and front
- side panel made of tempered glass!
- a cage for 2 HDDs and slots to screw in 2 SSDs
- fits a cooler and relatively large cards but not very large cards with 3 fans unfortunately
- enough space to close the back panel for cables
- comes with an FRGB Aerocool fan (molex)

generally a very decent box for its price, for those who want to spend that extra money on other components instead of getting a €140 Corsair box for example, this one is more than enough for a mid-range build, and with very good airflow because it has holes in the front
perhaps the best box for this price compared to other boxes on the market.

Translated from Greek ·

7
4

Captainlag
2022-02-03

With this case, I made my first build and I consider it beautiful and worth its money. Its price is what defines it and let me explain.... It doesn't claim quality laurels, as the plastic front is hard plastic and one of the support clips for the metal case has already broken. It also comes with only one fan which has a MOLEX connection and is therefore almost useless. It would be better if it didn't have it and they deducted its cost from the price!
The spaces inside the case are very good considering it is a midi case. Its great advantage is that the level on which the motherboard is supported is flat, completely flat without steps that create space for SSD SATA drives on the back side. With this flat configuration, it can accommodate large graphics cards and also if the motherboard has horizontal sockets, the plugs that will connect to them fit without any problem. In other cases that are much more popular than this one, there is a serious issue with the motherboard sockets (look in another case for my evaluation).
Also, the space for the power supply is very satisfactory, while there is space and enough slots to tie the cables in order to achieve a neat cabling management.
In conclusion, with a price around €35, I consider it the most value-for-money case on the market. Add another €50 and buy a set of A-RGB fans and you have the perfect air flow with dynamic control of both the air flow and the lighting.

Translated from Greek ·

1
5

spiridon.jets
2021-12-25

Here you are! Don't search anymore. The best value for money case! Very good material and lightweight. It came with magnetic RGB fan filters. With many screws, blades, tie wraps, etc. Very good cable management. The space is very good and gives you a good 'hand' to connect everything. I have never reviewed Scroutz before, but this time I was amazed by the quality I received, especially considering what I paid. The airflow is excellent, with space for water cooling or up to 8-9 fans. The window is real glass! Top!

Translated from Greek ·

6
4

JDeviant_Black
2021-11-30

After setting it up (see photo) ..four stars.
- I start with the packaging that has foam latex, which is more resistant to holding it and not the fake material that crumbles and is not so durable. +1 for this alone. It also comes with packaging and screws for the motherboard, etc. It does NOT have screws for fans.
- It comes with a RGB (rainbow style) 120mm fan at the back, which is beautiful and quite bright, BUT 1) it is Molex 2) if you put it in the front, it is not as visible through the mesh that the case has (but I preferred it over it 'glowing' at the back and ruining the overall look.
- It has a magnetic filter on top, and a simple filter for the power supply at the bottom. Also, the entire 'floor' from the PSU shroud is 'perforated' for more airflow (maybe it can fit 80-120mm fans with a trick if you want extra cooling).
- At the back, it easily fits one HDD and one SSD on top. In the front, there is no space for a 2.5" disk no matter what they say.
- I liked that it is tall and compact so that it sits nicely and 'fills' the eye even with uATX/mATX motherboards. With ATX, it may look even better, of course.
- It has glass, be careful to always lay the PC down to install/remove it, otherwise it will fall off.
Overall, a quite satisfactory impression, I would recommend it for up to 50 euros in total, and not more, for a build with a cost of 500-800 euros. With two extra fans in the front and one in the back, you have very good airflow. I would recommend it

Translated from Greek ·

5
5

Νίκος Γαλ
2020-11-06

VFM box from aerocool, 3 USB ports on the top, whoever wants to use it for air cooling, it has full air flow, I use it with 3 120mm fans in the front and 2 on top, stable temperature +/-1, comfortably fits ATX motherboards, graphics cards up to 300+mm.

Translated from Greek ·

11
See all

Skroutz.mt

Select delivery location

Delivery address

Aerocool Hive FRGB v3 Gaming Midi Tower Computer Case with Side Window Black

Description