The Autotech R2010 control board is designed for single-phase roller shutter motors with built-in limit switches, which it detects automatically. The built-in receiver operates at 433.92 MHz and stores fixed-code or rolling-code remote controls using the AUTOLEARN button. Automatic closing is set via a potentiometer, while the emergency opening function can receive a signal from a fire detection system or a manual safety switch.

The control board supports connections for safety photocells, a push-button panel, an operation warning light and safety lights. LEDs allow all inputs to be checked during installation and operation. It features a plastic enclosure and complies with European safety standards.

• Power supply: Single-phase, 230 V AC
• Receiver frequency: 433.92 MHz
• Remote control coding: 12-bit fixed code, 24-bit Autotech, 64-bit KeeLoq Rolling Code
• Maximum number of remote controls: 200 rolling-code remote controls
• Remote control storage: Via the AUTOLEARN button
• Antenna: Internal
• Automatic limit switch detection: Yes
• Automatic closing: Adjustable from 5 to 120 seconds
• Safety photocells: Connection via NC or NO contact, activated during closing, with the option to reverse the direction to opening
• Motor power output: 230 V AC
• Accessory power output: 24 V AC
• Maximum motor operating time: 120 seconds with built-in limit switches, 180 seconds with external limit switches
• Opening-only function: Via microswitch
• Push-button panel connection: For full opening with motors that have external limit switches
• Outputs: For a 230 V AC operation warning light and a 230 V AC safety lamp
• Diagnostics: LEDs for checking all inputs
• Phase protection fuse: 6.3 A slow-blow (5 x 20)
• Operating temperature: From -20 °C to +50 °C
• Enclosure material: Plastic
• Control box dimensions: 120 x 100 x 40 mm
• Board dimensions: 100 x 88 x 40 mm
• Weight: 0.37 kg
• Technology: SMD
• Compliance: CE
• Manual: In Greek
• Country of origin: Greece