Description
Specifications
Chrotech Adhex B primer is intended for the pretreatment of aluminium and other non-ferrous metals. Apply with a spray gun in one thin coat to create an adhesive surface for the subsequent paint system. It may also be applied to ferrous surfaces if deemed appropriate.
- Type: Two-component primer
- Substrates: Aluminium, galvanised sheet metal, plastic pipes and, if deemed appropriate, ferrous surfaces
- Surfaces: Interior and exterior
- Application: With a spray gun, in one thin coat
- Drying and recoating time: 30 minutes
- Thinning: With A-1100 thinner, approximately 40–60%
- Coverage: 10 ± 1 m²/L at a dry film thickness of approximately 10 μm
- Volume: 0.15 L
- Contains: Orthophosphoric acid, propan-2-ol, butan-1-ol
- Hazards: Highly flammable liquid and vapour. Causes severe skin burns and eye damage. May cause drowsiness or dizziness
- Precautions: Keep out of reach of children and away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not inhale vapours or spray. Wear protective gloves, clothing, and eye and face protection. Store locked up
- In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do, and continue rinsing. Immediately call a Poison Centre or doctor
- Disposal: Dispose of contents and container in accordance with local, national and international regulations
Specifications
- Genre
- Primer
- Surface Material
- Aluminum, Non-Ferrous Metals
- Surfaces
- Multiprimer
Quantity
- Mass Gaining
- 0.15 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.