Controllers

DeLock PCIe Card with 3 Firewire 400 / Firewire 800 Ports Code: 89153

The Delock 89153 card expands your computer with two external FireWire 800 ports and one FireWire 400 port. It connects to a PCI Express x1 slot and uses a Texas Instruments chipset, with support for...

The Delock 89153 card expands your computer with two external FireWire 800 ports and one FireWire 400 port. It connects to a PCI Express x1 slot and uses a Texas Instruments chipset, with support for OHCI V1.0 and 1.1, Hot Swap, and Plug & Play.

The FireWire 400 port supports speeds of up to 400 Mb/s, while the FireWire 800 ports support speeds of up to...

See full description See full description
65 47 €
Delivery Fri, 20 Nov - Thu, 26 Nov
14,00 €   shipping cost
Sent from Greece
From MG Manager 4.8 (272)
Greece
10 pieces
See Computer Hardware on the page of MG Manager

Learn more about invoicing

Description

Description

The Delock 89153 card expands your computer with two external FireWire 800 ports and one FireWire 400 port. It connects to a PCI Express x1 slot and uses a Texas Instruments chipset, with support for OHCI V1.0 and 1.1, Hot Swap, and Plug & Play.

The FireWire 400 port supports speeds of up to 400 Mb/s, while the FireWire 800 ports support speeds of up to 800 Mb/s. A free PCI Express slot and a 4-pin power connector are required.

  • Type: PCI Express x1 controller card
  • FireWire 400 ports: 1 external, 6-pin female
  • FireWire 800 ports: 2 external, 9-pin female
  • FireWire 400 speed: Up to 400 Mb/s
  • FireWire 800 speed: Up to 800 Mb/s
  • Chipset: Texas Instruments
  • Support: OHCI V1.0 and 1.1, Hot Swap, Plug & Play
  • Requirements: Windows 7/7-64/8.1/8.1-64/10/10-64, Linux from Kernel 2.6.x / Kernel 4.x.x, a free PCI Express slot, and a 4-pin power connector
  • Package contents: PCI Express card, FireWire A 6-pin male to FireWire A 4-pin male cable, approximately 150 cm long, manual

Manufacturer

See full description

Specifications

Specifications

Product Number
89153
Type
PCIe
Connectivity
Firewire 400, Firewire 800
Number of Ports
3
Low Profile
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • The faceplate is NOT low profile, although you can unscrew it and put it that way, with some instability. The box contains a 4-pin male to 6-pin firewire 400 (IEEE 1394a / i.link) male cable. It was automatically recognized on connected computers with Windows 10 and 11. It also worked without me connecting it directly to power, it took it from the motherboard. I tested it with Scenalyzer (many settings) and WinDV (minimal) successfully. Be careful with the installation instructions on the motherboard and connection to the camera to avoid short circuits and damage!

    Translated from Greek ·
    Did you find this review helpful?
  • The faceplate is NOT low profile, although you can unscrew it and put it that way, with some instability. The box contains a 4-pin male to 6-pin firewire 400 (IEEE 1394a / i.link) male cable. It was automatically recognized on connected computers with Windows 10 and 11. It also worked without me connecting it directly to power, it took it from the motherboard. I tested it with Scenalyzer (many settings) and WinDV (minimal) successfully. Be careful with the installation instructions on the motherboard and connection to the camera to avoid short circuits and damage!

    Translated from Greek ·
    0
  • See all

Description & Specifications

The Delock 89153 card expands your computer with two external FireWire 800 ports and one FireWire 400 port. It connects to a PCI Express x1 slot and uses a Texas Instruments chipset, with support for OHCI V1.0 and 1.1, Hot Swap, and Plug & Play.

The FireWire 400 port supports speeds of up to 400 Mb/s, while the FireWire 800 ports support speeds of up to 800 Mb/s. A free PCI Express slot and a 4-pin power connector are required.

  • Type: PCI Express x1 controller card
  • FireWire 400 ports: 1 external, 6-pin female
  • FireWire 800 ports: 2 external, 9-pin female
  • FireWire 400 speed: Up to 400 Mb/s
  • FireWire 800 speed: Up to 800 Mb/s
  • Chipset: Texas Instruments
  • Support: OHCI V1.0 and 1.1, Hot Swap, Plug & Play
  • Requirements: Windows 7/7-64/8.1/8.1-64/10/10-64, Linux from Kernel 2.6.x / Kernel 4.x.x, a free PCI Express slot, and a 4-pin power connector
  • Package contents: PCI Express card, FireWire A 6-pin male to FireWire A 4-pin male cable, approximately 150 cm long, manual

Manufacturer

Product Number
89153
Type
PCIe
Connectivity
Firewire 400, Firewire 800
Number of Ports
3
Low Profile
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • The faceplate is NOT low profile, although you can unscrew it and put it that way, with some instability. The box contains a 4-pin male to 6-pin firewire 400 (IEEE 1394a / i.link) male cable. It was automatically recognized on connected computers with Windows 10 and 11. It also worked without me connecting it directly to power, it took it from the motherboard. I tested it with Scenalyzer (many settings) and WinDV (minimal) successfully. Be careful with the installation instructions on the motherboard and connection to the camera to avoid short circuits and damage!

    Translated from Greek ·
    Did you find this review helpful?
  • The faceplate is NOT low profile, although you can unscrew it and put it that way, with some instability. The box contains a 4-pin male to 6-pin firewire 400 (IEEE 1394a / i.link) male cable. It was automatically recognized on connected computers with Windows 10 and 11. It also worked without me connecting it directly to power, it took it from the motherboard. I tested it with Scenalyzer (many settings) and WinDV (minimal) successfully. Be careful with the installation instructions on the motherboard and connection to the camera to avoid short circuits and damage!

    Translated from Greek ·
    0
  • See all
65,47 €
14,00 €   shipping cost