Skroutz.mt

Aruba Instant On AP15 WiFi Mesh Network Access Point Wi‑Fi 5 Dual Band (2.4 & 5GHz)
Access Points

Aruba Instant On AP15 WiFi Mesh Network Access Point Wi‑Fi 5 Dual Band (2.4 & 5GHz)

The Aruba Instant On AP15 access point is useful for creating or expanding a wireless network to connect multiple devices. It supports WiFi mesh, providing seamless WiFi at home with higher speeds and...

The Aruba Instant On AP15 access point is useful for creating or expanding a wireless network to connect multiple devices. It supports WiFi mesh, providing seamless WiFi at home with higher speeds and more devices.

It broadcasts signal on two frequencies:

  • 2.4 GHz: the most widespread with a long range.
  • 5 GHz: offers higher speed but is more sensitive to...
See full description See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 5

    The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

    Each newer generation is compatible with devices that support a previous one.
  • See all
Review the product
Product report

Description

Description

The Aruba Instant On AP15 access point is useful for creating or expanding a wireless network to connect multiple devices. It supports WiFi mesh, providing seamless WiFi at home with higher speeds and more devices.

It broadcasts signal on two frequencies:

  • 2.4 GHz: the most widespread with a long range.
  • 5 GHz: offers higher speed but is more sensitive to obstacles.

It is of Wi‑Fi 5 generation, the most widespread Wi-Fi standard, meeting the needs of most users. There is also the next generation Wi-Fi 6 for smart devices.

Features:

  • Manufacturer: Hewlett Packard
  • Model: AP15
  • Type: Access Point
  • Ports: 1
  • Speed: 1000 Mbps
  • Wi-Fi Standards: 802.11a/b/g/n/ac
  • Data Transfer Speed (wireless): 300 Mbps + 1733 Mbps
  • Frequency: 2.4 GHz - 5 GHz
  • WIRELESS SECURITY: WPA2 / WPA3
  • POWER OVER ETHERNET: Yes
  • Management System: Web UI
  • Warranty: 1 Year

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1600 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Aruba Instant On AP15 access point is useful for creating or expanding a wireless network to connect multiple devices. It supports WiFi mesh, providing seamless WiFi at home with higher speeds and more devices.

It broadcasts signal on two frequencies:

  • 2.4 GHz: the most widespread with a long range.
  • 5 GHz: offers higher speed but is more sensitive to obstacles.

It is of Wi‑Fi 5 generation, the most widespread Wi-Fi standard, meeting the needs of most users. There is also the next generation Wi-Fi 6 for smart devices.

Features:

  • Manufacturer: Hewlett Packard
  • Model: AP15
  • Type: Access Point
  • Ports: 1
  • Speed: 1000 Mbps
  • Wi-Fi Standards: 802.11a/b/g/n/ac
  • Data Transfer Speed (wireless): 300 Mbps + 1733 Mbps
  • Frequency: 2.4 GHz - 5 GHz
  • WIRELESS SECURITY: WPA2 / WPA3
  • POWER OVER ETHERNET: Yes
  • Management System: Web UI
  • Warranty: 1 Year

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
1600 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 5

Wi-Fi Generation

Wi‑Fi 5

The most widespread Wi-Fi standard, significantly faster than Wi-Fi 4. Wi-Fi 5 can meet the needs of most users for now. The next generation (Wi-Fi 6) began to be released in 2019 and offers the ability to connect many more devices to accommodate the increasing number of smart devices in a home.

Each newer generation is compatible with devices that support a previous one.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.
PoE Support
PoE

PoE Support

PoE
Device powered through the network cable, without a separate power adapter. Offers simple installation with a single cable.
MIMO Technology
4x4

MIMO Technology

Technology that uses multiple antennas for simultaneous sending and receiving of data. This improves the speed and stability of Wi-Fi, especially when there are many connected devices.

4x4
Use of four antennas for maximum performance, better stability, and high speeds in environments with many devices.

General Characteristics

Placement
Indoor
Ethernet Ports
1

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
Yes

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
Yes

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
No

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

249,00 €
14,00 €   shipping cost