Skroutz.mt

TP-LINK TL-POE150S PoE Injector
PoE Adapters

TP-LINK TL-POE150S PoE Injector

Key features:

  • IEEE 802.3, IEEE802.3u, IEEE802.3ab
  • 1000 Mbps
  • Power: 15.4W (Max. 48VDC)
  • Up to 100 meters range
  • Plug-and-Play
See full description
16 60 €
Delivery by Wed, 24 Jun
14,00 €   shipping cost
Sent from Greece
From T support 4.9 (38)
4.9 (38 reviews)
Greece
4 pieces
See Networking on the page of T support
Product report

Description

Description

The TL-POE150S PoE Injector Adapter is a PoE splitter designed to provide power to network devices through a local Power Over Ethernet network. You don't need to have a PoE switch, as you can connect your existing non-PoE switch or non-PoE router to PoE devices with the help of the TL-POE150S.

Gigabit Speeds & Ultimate Compatibility

The Tp-Link TL-POE150S v4 is a powerful Gigabit PoE Injector that fully complies with the IEEE 802.3af standard. Designed to deliver speeds of up to 1000Mbps, it ensures that your data transfer remains lightning fast, while simultaneously providing the necessary power to your devices.

Power Where There Are No Outlets

Do you need to install a camera or an Access Point in a location without power access? The TL-POE150S transmits data and electrical power through a single Ethernet cable, allowing you to extend your network up to 100 meters, offering complete freedom in installation.

Ideal for PD (Powered Devices)

This injector works perfectly with all devices that support PoE (PD), such as IP cameras, IP phones, and wireless APs. It can also be combined with PoE Splitters (such as the TL-POE10R) to connect devices that do not have native PoE support.

Plug-and-Play & Smart Design

Installation is extremely simple, as no configuration is required. With its compact dimensions (54 x 81 x 24 mm), it fits discreetly anywhere, while Auto-Negotiation and Auto MDI/MDIX technology ensure proper connection with any type of network cable.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Type
Injector
Standard
PoE (IEEE 802.3af)
Passive
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (26)

Reviews

4.9
26
4.9
Review this product
  1. 24
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • CVaf
    5
    CVaf

    I had Ethernet from the router to the front door and with POE I connected power and network to the fiber optic box outside the house, avoiding drilling and cable routing

    Translated from Greek ·
    0
  • 5
    John_Sarigiannidis

    Connected to Tp Link VIGI C455 camera, works perfectly.

    Translated from Greek ·
    0
  • 5
    Athlete18

    Very good in combination with the TP Link splitter, used in an installation with Tapo C320ws.

    Translated from Greek ·
    2
  • 5
    arvanitis_garage

    It does what it promises. It was installed in a cable installation of 89 meters. The speed is unbeatable

    Translated from Greek ·
    1
  • 5
    dxskr

    It's fine, it fit into the Hikvision camera

    Translated from Greek ·
    3
  • See all

Description & Specifications

The TL-POE150S PoE Injector Adapter is a PoE splitter designed to provide power to network devices through a local Power Over Ethernet network. You don't need to have a PoE switch, as you can connect your existing non-PoE switch or non-PoE router to PoE devices with the help of the TL-POE150S.

Gigabit Speeds & Ultimate Compatibility

The Tp-Link TL-POE150S v4 is a powerful Gigabit PoE Injector that fully complies with the IEEE 802.3af standard. Designed to deliver speeds of up to 1000Mbps, it ensures that your data transfer remains lightning fast, while simultaneously providing the necessary power to your devices.

Power Where There Are No Outlets

Do you need to install a camera or an Access Point in a location without power access? The TL-POE150S transmits data and electrical power through a single Ethernet cable, allowing you to extend your network up to 100 meters, offering complete freedom in installation.

Ideal for PD (Powered Devices)

This injector works perfectly with all devices that support PoE (PD), such as IP cameras, IP phones, and wireless APs. It can also be combined with PoE Splitters (such as the TL-POE10R) to connect devices that do not have native PoE support.

Plug-and-Play & Smart Design

Installation is extremely simple, as no configuration is required. With its compact dimensions (54 x 81 x 24 mm), it fits discreetly anywhere, while Auto-Negotiation and Auto MDI/MDIX technology ensure proper connection with any type of network cable.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Type
Injector
Standard
PoE (IEEE 802.3af)
Passive
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (26)

4.9
26
4.9
Review this product
  1. 24
  2. 1
  3. 1
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • CVaf
    5
    CVaf

    I had Ethernet from the router to the front door and with POE I connected power and network to the fiber optic box outside the house, avoiding drilling and cable routing

    Translated from Greek ·
    0
  • 5
    John_Sarigiannidis

    Connected to Tp Link VIGI C455 camera, works perfectly.

    Translated from Greek ·
    0
  • 5
    Athlete18

    Very good in combination with the TP Link splitter, used in an installation with Tapo C320ws.

    Translated from Greek ·
    2
  • 5
    arvanitis_garage

    It does what it promises. It was installed in a cable installation of 89 meters. The speed is unbeatable

    Translated from Greek ·
    1
  • 5
    dxskr

    It's fine, it fit into the Hikvision camera

    Translated from Greek ·
    3
  • See all
16,60 €
14,00 €   shipping cost