Description
Specifications
Sikasil Universal acetoxy silicone is designed for glazing and perimeter sealing on smooth, non-porous surfaces such as glass and glazed ceramic tiles. It is a one-component product and also adheres to aluminium, stainless and galvanised metal, as well as powder-coated surfaces.
Its high elasticity and low modulus allow it to absorb movement without stress. It resists shrinkage, cracking and discolouration, and is also suitable for exterior sealing where resistance to environmental ageing is required.
- Type: One-component acetoxy silicone
- Uses: Glazing and perimeter sealing of smooth, non-porous surfaces
- Application surfaces: Glass, glazed ceramic tiles, aluminium, stainless and galvanised metal, powder-coated surfaces
- Colour: Transparent
- Packaging: Cartridge
- Volume: 280 ml
- Elasticity: High
- Modulus of elasticity: Low
- Resistance: To shrinkage, cracking and discolouration
- Marking: CE, EN 15651-1 F EXT-INT CC and EN 15651-2 G CC
- Service temperature: −40 °C to +100 °C
- Application temperature: +5 °C to +40 °C
- Skin formation time: Approximately 15 minutes (23 °C / 50% RH)
- Curing rate: Approximately 3 mm/24 hours (23 °C / 50% RH)
- Coverage: Approximately 2.8 m for a 10 × 10 mm joint, 1.8 m for a 15 × 10 mm joint and 1.4 m for a 20 × 10 mm joint per 280 ml cartridge
- Tool cleaning: With Sika Remover-208 while the silicone is fresh; mechanically after curing
- Product Number
- 107386
Dimensions
- Packaging
- Cartridge
- Colour
- Transparent
Attributes
- Adhesive
- No
- Mold Resistant
- No
- for Wood
- No
- High Temperature
- No
- Aquarium
- No
- Acrylic
- No
- Polyurethane
- No
Quantity
- Mass Gaining
- 280 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.