Skroutz.mt

Bosch GSS 280 AVE Professional Electric Pulse Sander 350W with Speed Control and with Suction System 0601292901
Sanders

Bosch GSS 280 AVE Professional Electric Pulse Sander 350W with Speed Control and with Suction System 0601292901

GSS 280 AVE Orbital Sander 350W

  • Nominal input power: 350 W
  • Nominal speed: 8,000 – 11,000 min-1
  • Number of oscillations without load: 16,000 – 22,000 min-1
  • Orbit diameter: 2.4 mm
  • Weight: 2.7 kg
  • Tool...

GSS 280 AVE Orbital Sander 350W

  • Nominal input power: 350 W
  • Nominal speed: 8,000 – 11,000 min-1
  • Number of oscillations without load: 16,000 – 22,000 min-1
  • Orbit diameter: 2.4 mm
  • Weight: 2.7 kg
  • Tool dimensions (width): 114 mm
  • Tool dimensions (length): 440 mm
  • Tool dimensions (height): 205 mm
  • Packaging dimensions (width x length x height): 340 x 440 x 240 mm
  • ...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Oscillation Range

    Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).

    2.4

    General sanding, wood or paint finishing.

  • Velcro

    The abrasive pads can be attached with Velcro (hook-and-loop fastener).

    1
  • Weight (Net) 2700 gr
  • See all
The product is not available for shipping to the selected country.
Product report

Description

Description

GSS 280 AVE Orbital Sander 350W

  • Nominal input power: 350 W
  • Nominal speed: 8,000 – 11,000 min-1
  • Number of oscillations without load: 16,000 – 22,000 min-1
  • Orbit diameter: 2.4 mm
  • Weight: 2.7 kg
  • Tool dimensions (width): 114 mm
  • Tool dimensions (length): 440 mm
  • Tool dimensions (height): 205 mm
  • Packaging dimensions (width x length x height): 340 x 440 x 240 mm
  • Electric voltage: 230 V
  • Sanding surface - Sanding plate, width: 114 mm
  • Sanding plate, length: 226 mm
  • Sanding sheet for clamping, width: 115 mm
  • Sanding sheet for clamping, length: 280 mm
  • Sanding sheet with self-adhesion, width: 115 mm
  • Sanding sheet with self-adhesion, length: 230 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Oscillation Range
2.4 mm

Oscillation Range: 2.4

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
2700 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
-

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
97 dB
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
280x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

GSS 280 AVE Orbital Sander 350W

  • Nominal input power: 350 W
  • Nominal speed: 8,000 – 11,000 min-1
  • Number of oscillations without load: 16,000 – 22,000 min-1
  • Orbit diameter: 2.4 mm
  • Weight: 2.7 kg
  • Tool dimensions (width): 114 mm
  • Tool dimensions (length): 440 mm
  • Tool dimensions (height): 205 mm
  • Packaging dimensions (width x length x height): 340 x 440 x 240 mm
  • Electric voltage: 230 V
  • Sanding surface - Sanding plate, width: 114 mm
  • Sanding plate, length: 226 mm
  • Sanding sheet for clamping, width: 115 mm
  • Sanding sheet for clamping, length: 280 mm
  • Sanding sheet with self-adhesion, width: 115 mm
  • Sanding sheet with self-adhesion, length: 230 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Pulse Sander

Type

Pulse Sander

For smoothing large surfaces with rectangular sanding base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
350 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Oscillation Range
2.4 mm

Oscillation Range: 2.4

Refers to the amount/length of the back-and-forth or up-and-down movement of the disc or base (greater range removes more material, smaller range provides a more precise finish).


General sanding, wood or paint finishing.
Net Weight
2700 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
-

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
97 dB
Pulses
-

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Sandpaper Dimensions
280x115 mm
Velcro
Yes

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Hard Case
Handle Included
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product