The Hager ESC425 rail-mounted contactor is four-pole and has four normally open contacts (4NO). The AC control voltage is 230 V, and the acceptable load current in AC7 A category is 25 A.
- Type: Power
- Number of poles: 4
- Contacts: 4NO
- AC control voltage: 230 V
- Rated operating voltage: 400 V
- Rated insulation voltage: 440 V
- Frequency: 50 Hz
- Acceptable load current AC7 A: 25 A
- Acceptable load current AC7 B: 8.5 A
- Thermal current outside enclosure: 25 A
- Input power consumption: 21 VA
- Operating consumption: 3.4 VA
- Rated operating power AC7 B: 880 W
- Rated operating power AC7 B at 400 V: 13.8 kW
- Power loss per contact: 1.5 W
- Total power loss at rated current: 9.4 W
- Impulse withstand voltage: 4 kV
- Opening response time: 15 ms
- Closing response time: 25 ms
- Electrical endurance: 30,000 operating cycles
- Mechanical endurance: 1,000,000 operations
- Installed product depth: 60 mm
- Installed product height: 83 mm
- Installed product width: 35.75 mm
- Maximum load with fluorescent lamps: 950 VA
- Maximum load with parallel fluorescent lamps: 810 VA
- Maximum load in a dual circuit: 1990 VA
- Maximum power with incandescent lamps: 1900 W
- Tightening torque: 1.2 Nm
- Connection cross-section for stranded control cable: 1 to 6 mm²
- Connection cross-section for control contacts: 1 to 10 mm²
- Connection cross-section for rigid cable: 1 to 10 mm²
- Connection cross-section for flexible cable: 1 to 6 mm²
- Connection type: Screw
- Accessory mounting capability: Yes
- Insulation class: II
- IP protection rating: IP2
- Storage temperature: -40 to 80 °C
- Compliance with the European RoHS Directive: Compliant
- European WEEE Directive applies: Yes
- Type
- Power
- Number of Poles
- 4
- Voltage
- 230 V
- Nominal Voltage
- 25 A
- with Energy Consumption Meter
- No
- with Timer
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.