Vivechrom Vive Acrylic Base D emulsion paint is intended for exterior surfaces and is suitable for new and previously painted plaster, concrete, brick and wood surfaces. Its 100% acrylic content provides weather resistance, opacity and adhesion. It can also be applied to surfaces that need frequent repainting and refreshing.
Dilute with 5–10% clean water, mix thoroughly before use and apply in two coats using a roller, brush or airless spray gun. Apply at temperatures between 10°C and 35°C. It is touch-dry in 1 hour and can be recoated after 3 hours. Clean tools immediately after use with water and detergent solution.
Surfaces must be clean, dry and free of dust, oils, salts, and any loose or poorly bonded material. New surfaces or chalking painted surfaces must be primed with VIVEDUR SOLVENT-BASED PRIMER or VIVE PRIMER 100% ACRYLIC EMULSION PRIMER. On surfaces in good condition, apply directly.
Contains a biocidal product and may cause an allergic reaction. When spraying, avoid inhaling the mist or droplets. For sanding painted surfaces, wet sanding is preferred; if exposure to dust cannot be avoided, use suitable respiratory protective equipment. Keep out of reach of children and avoid contact with eyes, skin or clothing.
- Type: 100% acrylic paint
- Use: Exterior
- Colour: White
- Base: D
- Quantity: 9 L
- Suitable for: Plaster, concrete, brick and wood
- Coverage: Approximately 11 m² per litre per coat
- Coats: 2
- Dilution: 5–10% clean water
- Application: With a roller, brush or airless spray gun
- Application temperature: 10°C to 35°C
- Touch-dry: 1 hour
- Recoating time: 3 hours
- VOC: Up to 2 g/l
- EU VOC limit: 40 g/l
- Storage temperature: 5°C to 40°C
- Usage
- Exterior
- Quantity
- 9 lt
- Features
- Acrilyc
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.