Skroutz.mt

Quadro MIG/MMA-260F Welding Machine Inverter MIG / MMA with Maximum Welding Current 260A and Duty Cycle 85%
Welding Machines

Quadro MIG/MMA-260F Welding Machine Inverter MIG / MMA with Maximum Welding Current 260A and Duty Cycle 85%

Model: MIG/MMA-260F

Brand:

Certificate: This model with inverter technology makes the welding machine run with a high energy utilization rate and improves energy loss due to the electrical circuit not...

Model: MIG/MMA-260F

Brand:

Certificate: This model with inverter technology makes the welding machine run with a high energy utilization rate and improves energy loss due to the electrical circuit not remaining open, offering low operating costs and creating perfect welding. It is suitable for MIG welding.

Technical Specifications:

  • Input Voltage: 220 (V)
  • ...
See full description See full description

Top specs

  • Welding Current

    260

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    6.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
1491 49 €
Delivery Wed, 12 Aug - Fri, 14 Aug
77,00 €   shipping cost
Sent from Greece
From Shopaholic
Greece
5 pieces
See Tools on the page of Shopaholic

Learn more about invoicing
Review the product
Product report

Description

Description

Model: MIG/MMA-260F

Brand:

Certificate: This model with inverter technology makes the welding machine run with a high energy utilization rate and improves energy loss due to the electrical circuit not remaining open, offering low operating costs and creating perfect welding. It is suitable for MIG welding.

Technical Specifications:

  • Input Voltage: 220 (V)
  • Frequency: 50 (Hz)
  • Power: 6.4 (KVA)
  • Welding Current: 20-260 (A)
  • No-load Voltage: 50 (V)
  • Output Voltage: 16.7-26 (V)
  • Electrode Diameter: 0.5-10 (mm)
  • Wire Diameter: 0.8-1.0 (mm)
  • Weight: 18.5 (Kg)
  • Protection Class: F
  • Dimensions: 510×280×370 (mm)

Feeder Technical Specifications:

  • Model: SB-10
  • Rated Voltage: DC 24V
  • Rated Current: 3A
  • Wire Diameter: 0.8/1.0/1.2
  • Feeding Speed: 1.5-20m/min
  • Protection Class: IP2X
  • Welding Current: 280A-100%/350A-60%

The welding includes:

  • 1. External feeder
  • 2. Welding clamp with 5m cable
  • 3. Gas regulator
  • 4. Body with cable
  • 5. Eye protection mask
  • 6. Wire brush
  • 7. Operating manual

ALL INVERTERS INCLUDE THE MECHANISMS:

  • HOT-START mechanism – increases the current power for a smooth welding start.
  • ANTI-STICK mechanism – prevents the electrode from sticking to the welded material.
  • ARC-FORCE mechanism – ensures uniform welding.
  • LIFT-ARC mechanism – provides low power current to avoid damaging the tip when contacting the welding surface.

Attention! For inverter welders to work with a generator, the generator must have more power than the welder, otherwise, it will damage the INVERTER. The ratio is 1.3 : 1 KVA.

Product Code: 17.03.05

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
260 A

Welding Current (max): 260


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
85 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
6.4 kVA

Power: 6.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
10 mm

Maximum Electrode Diameter: 10


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Model: MIG/MMA-260F

Brand:

Certificate: This model with inverter technology makes the welding machine run with a high energy utilization rate and improves energy loss due to the electrical circuit not remaining open, offering low operating costs and creating perfect welding. It is suitable for MIG welding.

Technical Specifications:

  • Input Voltage: 220 (V)
  • Frequency: 50 (Hz)
  • Power: 6.4 (KVA)
  • Welding Current: 20-260 (A)
  • No-load Voltage: 50 (V)
  • Output Voltage: 16.7-26 (V)
  • Electrode Diameter: 0.5-10 (mm)
  • Wire Diameter: 0.8-1.0 (mm)
  • Weight: 18.5 (Kg)
  • Protection Class: F
  • Dimensions: 510×280×370 (mm)

Feeder Technical Specifications:

  • Model: SB-10
  • Rated Voltage: DC 24V
  • Rated Current: 3A
  • Wire Diameter: 0.8/1.0/1.2
  • Feeding Speed: 1.5-20m/min
  • Protection Class: IP2X
  • Welding Current: 280A-100%/350A-60%

The welding includes:

  • 1. External feeder
  • 2. Welding clamp with 5m cable
  • 3. Gas regulator
  • 4. Body with cable
  • 5. Eye protection mask
  • 6. Wire brush
  • 7. Operating manual

ALL INVERTERS INCLUDE THE MECHANISMS:

  • HOT-START mechanism – increases the current power for a smooth welding start.
  • ANTI-STICK mechanism – prevents the electrode from sticking to the welded material.
  • ARC-FORCE mechanism – ensures uniform welding.
  • LIFT-ARC mechanism – provides low power current to avoid damaging the tip when contacting the welding surface.

Attention! For inverter welders to work with a generator, the generator must have more power than the welder, otherwise, it will damage the INVERTER. The ratio is 1.3 : 1 KVA.

Product Code: 17.03.05

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
260 A

Welding Current (max): 260


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
85 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Power
6.4 kVA

Power: 6.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
10 mm

Maximum Electrode Diameter: 10


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
No
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

1.491,49 €
77,00 €   shipping cost