Skroutz.mt

Astral Pool Pool Pump Sena Filter Single-Phase with Horsepower 0.33hp and Maximum Water Flow 7000 liters/hour
Pool Water Pumps

Astral Pool Pool Pump Sena Filter Single-Phase with Horsepower 0.33hp and Maximum Water Flow 7000 liters/hour

Key features:

  • Maximum Flow Rate: 7000 liters/hour
  • Meets GS and IP55 specifications
  • Connects with 50mm pipes.
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Small (up to 50 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

  • Speed

    Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.
  • See all

User Manual

Product report

Description

Description

Details

New generation pumps with power from 1/3hp to 1.25hp in single-phase and 3/4hp to 1.25hp in three-phase. Motor protection IP-55, with all parts in contact with water made of inox 316. The flow rate is given for the 1/3hp and 1/2 hp at 6 m head and at 10 m for the rest at 3,000 revolutions per minute.

Features

  • Maximum Flow Rate: 7000 liters/hour
  • Meets GS and IP55 standards
  • Silent operation
  • Features Class F insulation and AISI 316 stainless steel shaft
  • Connects to 50mm pipes
  • With transparent pre-filter cover and easy opening
  • Silent operation
  • Combination with millenium & cartridge filter. Ideal for SPA and small pools
  • Recommended for use with seawater.


    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Product Guides

    User Manual

    Main Specifications

    Type
    Filter
    Power (hp)
    0.33 hp

    Power (hp)

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
    Power Source
    Single-Phase

    Power Source

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.
    Motor Type
    Constant Speed

    Motor Type

    Constant Speed

    The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
    Suitable for Saltwater
    Yes

    Suitable for Saltwater

    Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
    Pool Size
    Small (up to 50 m³)
    Filter Included
    No

    Performance

    Maximum Supply
    7000 lt/h

    Maximum Supply

    Shows how many liters of water the pump can deliver in 1 hour.
    Maximum Head of a Pump
    10 m

    Maximum Head of a Pump

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.
    Speed
    3000 rpm

    Speed

    Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

    Installation

    Connection Nozzle
    50 mm

    Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Reviews (2)

    Reviews

    5.0
    2
    5.0
    Review this product
    1. 2
    2. 4 stars
      0
    3. 3 stars
      0
    4. 2 stars
      0
    5. 1 star
      0
    Review this product
    • 5
      1 out of 1 members found this review helpful
      jc.guyomarch

      Verified purchase

      Good quality / price ratio

      Translated from Greek ·
      Did you find this review helpful?
    • 5
      Petros_Drakos

      Verified purchase

      This review is about the power: 1hp

    Description & Specifications

    Details

    New generation pumps with power from 1/3hp to 1.25hp in single-phase and 3/4hp to 1.25hp in three-phase. Motor protection IP-55, with all parts in contact with water made of inox 316. The flow rate is given for the 1/3hp and 1/2 hp at 6 m head and at 10 m for the rest at 3,000 revolutions per minute.

    Features

    • Maximum Flow Rate: 7000 liters/hour
    • Meets GS and IP55 standards
    • Silent operation
    • Features Class F insulation and AISI 316 stainless steel shaft
    • Connects to 50mm pipes
    • With transparent pre-filter cover and easy opening
    • Silent operation
    • Combination with millenium & cartridge filter. Ideal for SPA and small pools
    • Recommended for use with seawater.


      Manufacturer

      Manufacturer Details

      Warnings & Safety Information

      Product Guides

      User Manual

      Main Specifications

      Type
      Filter
      Power (hp)
      0.33 hp

      Power (hp)

      Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
      Power Source
      Single-Phase

      Power Source

      Single-Phase

      Operates with standard household electricity (230V). It is suitable for residential pools.
      Motor Type
      Constant Speed

      Motor Type

      Constant Speed

      The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
      Suitable for Saltwater
      Yes

      Suitable for Saltwater

      Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
      Pool Size
      Small (up to 50 m³)
      Filter Included
      No

      Performance

      Maximum Supply
      7000 lt/h

      Maximum Supply

      Shows how many liters of water the pump can deliver in 1 hour.
      Maximum Head of a Pump
      10 m

      Maximum Head of a Pump

      Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.
      Speed
      3000 rpm

      Speed

      Indicates how fast the motor spins (revolutions per minute) to move the water. This movement is necessary for filtering the pool and for properly distributing disinfectants so that the water does not turn green. The more revolutions, the more water is moved, but the more electricity the pump consumes and the more noise it makes.

      Installation

      Connection Nozzle
      50 mm

      Connection Nozzle

      Indicates the diameter of the pipe that can be connected to the pump.

      • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
      • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

      Tip: Check the diameter of your existing pipes before making a selection.

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

      Reviews (2)

      5.0
      2
      5.0
      Review this product
      1. 2
      2. 4 stars
        0
      3. 3 stars
        0
      4. 2 stars
        0
      5. 1 star
        0
      Review this product
      • 5
        1 out of 1 members found this review helpful
        jc.guyomarch

        Verified purchase

        Good quality / price ratio

        Translated from Greek ·
        Did you find this review helpful?
      • 5
        Petros_Drakos

        Verified purchase

        This review is about the power: 1hp

      370,00 €
      23,00 €   shipping cost