So far (10 days) it seems honest. Clear image, quick login to the app. If you have a little experience, you won't have any issue setting it up. The CareCamPro app is easy to use. I got it because it's Onvif to connect it to an NVR. Since the settings to log in are nowhere to be found, I discovered them after quite a bit of searching. They are as follows:
username: admin
password: admin123456
default ports:
http: 80
rtsp: 8554
https: 443
onvif: 6688
6/10/23 Update
There are two versions of the camera because I needed to get two more. The newer one that takes firmware 9/23 is the one with the ethernet port. The older one has a usb port and does not receive any updates. The difference I noticed is that in the old one, the setting for favorite camera positions does not work, which is not bad because on restart it does not check ptz and remains in the last position (good if the power goes out). Also, the password changes to 123456.
5/9/24
No issues, they work flawlessly.
Μέχρι στιγμής (10 μέρες) δείχνει τίμια. Καθαρή εικόνα, γρήγορο login στην εφαρμογή. Αν έχεις λίγη εμπειρία δε θα έχεις κανένα θέμα να τη ρυθμίσεις. Εύκολη η εφαρμογή της CareCamPro. Εγώ τη πήρα επειδή είναι Onvif για να τη συνδέσω με NVR. Επειδή δεν υπάρχουν πουθενά τα settings για να κάνεις login τα βρήκα μετά από αρκετό ψάξιμο. Αυτά έχουν ως εξής:
username: admin
password: admin123456
default ports:
http: 80
rtsp: 8554
https: 443
onvif: 6688
6/10/23 Update
Κυκλοφορούν δύο εκδόσεις της κάμερας επειδή χρειάστηκα να πάρω άλλες δύο. Η πιο νέα που παίρνει firmware 9/23 είναι αυτή με τη θύρα ethernet. Η πιο παλιά έχει θύρα usb και δε παίρνει κάποιο update. Η διαφορά που εντόπισα είναι πως στη παλιά δε παίζει η ρύθμιση για αγαπημένες θέσεις της κάμερας το οποίο δεν είναι κακό γιατί σε restart δε κάνουν έλεγχο ptz και παραμένουν στη τελευταία θέση (καλό αν πέσει το ρεύμα). Επίσης ο κωδικός αλλάζει σε 123456.
5/9/24
Κανένα θέμα, δουλεύουν υποδειγματικά.