Autonomous smoke detector (Stand Alone Smoke Detector), optical technology (photoelectric), compliant with the “EN 14604: 2005” standard. It features a built-in siren with a power of 85dB/3m and is powered by a 9V battery (included). It has a Test button as well as a low battery level warning.
Standalone Smoke Detector Sentek SD218
Autonomous smoke detector (Stand Alone Smoke Detector), optical technology (photoelectric), compliant with the “EN 14604: 2005” standard. It features a built-in siren with a power of 85dB/3m and is powered by a 9V battery (included). It has a Test button as well as a low battery level warning.
Use of Photoelectric Technology
With the use of photoelectric technology, it is more sensitive in detecting slow-burning fires that smolder with thick black smoke, produce little heat, and can smolder for hours before developing into a fire.
Includes a 9V battery installed inside. Before first use, remove the battery safety strip!
Technical characteristics
- Standalone operation
- Operates with 9V 6F22 battery (included)
- Optical detection technology
- Siren (85dB)
- TEST button
- Low battery indicator
- Dimensions: Φ102 x 35mm
- Smoke sensitivity: 0.08—0.14 dB/m
- Battery life: ~18 months (Carbon Zinc), ~3 years (Alkaline), ~10 years (Lithium)
- Operating temperature range: 0°C to 50°C
- Operating humidity range: 0 to 95% RH, no condensation or icing
- Siren volume: 85 dB/3m
- Dimensions: 102mm (Diameter) x 35mm (Height) with base
- Weight: ~130g with base and battery
Installation-Functionality Check:
- The detector is installed on the wall or the ceiling of the room.
- The red LED visible through the TEST button blinks every 30 seconds and indicates that the detector is operating normally.
- If the detector begins to beep every 32 seconds and the LED blinks, it means the battery needs to be replaced.
- Check the detector every week by pressing the TEST button. The alarm should sound within the next 20 seconds.
- Attention: the check is done only in this way. Do not introduce smoke into the device.
- If the room temporarily fills with smoke, e.g. from cooking, and the detector starts to sound, open the windows to ventilate the area and the alarm will stop.
- Keep the detector clean by wiping it with a slightly damp clean cloth.
Included in the package:
- 1 x Smoke Detector SD218
- 1 x Ceiling Base
- 1 x 9V Battery
- 1 x Set of wall plugs and mounting screws
- 1 x User & Installation Manual (In English)
Installation tips to avoid unnecessary activation
- Do not install in areas with fumes, such as next to a cooking stove, where unnecessary alarm activation may occur
- Do not install in enclosed parking lots or garages where there is insufficient ventilation and high concentrations of exhaust gases
- Do not install next to heating or air conditioning ducts
Dimensions
- Type
- Smoke Detector
- Thread
- No
- Autonomous
- Yes
Smart Features
- Smart Οικοσύστημα
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.