Skroutz.mt

Isomat Σοβάς Plaster Fillers Marmocret Base Grey 25kg
Plaster Fillers

Isomat Σοβάς Plaster Fillers Marmocret Base Grey 25kg

Ready mortar for the "rough coat" of plaster. It is the ideal substrate in case the final ("rubbed" or "fine") coat of plaster will use the ready-made, colored water-repellent plasters MARMOCRET and

Ready mortar for the "rough coat" of plaster. It is the ideal substrate in case the final ("rubbed" or "fine") coat of plaster will use the ready-made, colored water-repellent plasters MARMOCRET and MARMOCRET PLUS. It is mixed only with water.

See full description See full description
Review the product
Product report

Description

Description

Ready mortar for the "rough coat" of plaster. It is the ideal substrate in case the final ("rubbed" or "fine") coat of plaster will use the ready-made, colored water-repellent plasters MARMOCRET and MARMOCRET PLUS. It is mixed only with water. It is applied with a plaster spraying machine, trowel, or hawk. It is classified as a mortar type GP CS II, W0 according to EN 998-1.

Technical Specifications

  • Form: cementitious mortar
  • Color: gray
  • Granulometry: up to 1.3 mm
  • Water requirement: 4.75 l/25 kg bag
  • Apparent weight of dry mortar: 1.60 ± 0.10 kg/l
  • Apparent weight of wet mortar: 1.70 ± 0.10 kg/l
  • Compressive strength: 3.70 ± 0.50 N/mm²
  • Flexural strength: 1.20 ± 0.30 N/mm²
  • Adhesion after 28 days: 0.50 N/mm²
  • Capillary water absorption: ≤ 1.0 kg/m² min0.5
  • Thermal conductivity coefficient (λ10,dry): 0.67 W/(m.K) for R=50%
  • Water vapor diffusion coefficient (μ): 15/35
  • Pot life: 4 h at +20°C
  • Maximum application thickness in one layer: 30 mm

Consumption

Approximately 13.5 kg/m2 /cm layer thickness.

Weight

25 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Fast-setting
No
Fiber-reinforced
No
Resin-based
No
Acrylic
No
Water-repellent
No
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Ready mortar for the "rough coat" of plaster. It is the ideal substrate in case the final ("rubbed" or "fine") coat of plaster will use the ready-made, colored water-repellent plasters MARMOCRET and MARMOCRET PLUS. It is mixed only with water. It is applied with a plaster spraying machine, trowel, or hawk. It is classified as a mortar type GP CS II, W0 according to EN 998-1.

Technical Specifications

  • Form: cementitious mortar
  • Color: gray
  • Granulometry: up to 1.3 mm
  • Water requirement: 4.75 l/25 kg bag
  • Apparent weight of dry mortar: 1.60 ± 0.10 kg/l
  • Apparent weight of wet mortar: 1.70 ± 0.10 kg/l
  • Compressive strength: 3.70 ± 0.50 N/mm²
  • Flexural strength: 1.20 ± 0.30 N/mm²
  • Adhesion after 28 days: 0.50 N/mm²
  • Capillary water absorption: ≤ 1.0 kg/m² min0.5
  • Thermal conductivity coefficient (λ10,dry): 0.67 W/(m.K) for R=50%
  • Water vapor diffusion coefficient (μ): 15/35
  • Pot life: 4 h at +20°C
  • Maximum application thickness in one layer: 30 mm

Consumption

Approximately 13.5 kg/m2 /cm layer thickness.

Weight

25 kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
Fast-setting
No
Fiber-reinforced
No
Resin-based
No
Acrylic
No
Water-repellent
No
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

8,15 €
74,00 €   shipping cost