They come in a pack of three. In terms of size, they are small, so theoretically they will fit some mobile phones. Personally, I did not try it as the front camera already ruins the aesthetics of the screen on both the One Plus 6 and the 7t and the Xiaomi Note 9 Pro.
On the back, they have a small plastic sheet that needs to be removed before installation, which essentially protects the adhesive that is used to stick them onto surfaces. Regarding the installation, I will say the following:
1. It easily fit into the first iPad without me having to do anything other than figuring out where exactly it should go.
2. In the second iPad, which is the one in the photos I uploaded, the process was a bit strange because I have a Spigen case on it and usually these cases have relatively large openings for the cameras. So, it would be good to test approximately where you want it before removing the protective layer, if you have similar cases. One of the three in the pack (the one for the second iPad) needed a very small drop of instant glue because it came off from one side. I don't know if I would have done the same in general or if I would have used the third one in the pack, but since I was already dealing with fixing something on the case that broke (it's been three full years and counting), I also applied glue to this one.
3. Overall, the placement was very easy for me because I had one of the tweezers that I use when printing or painting miniatures, and the whole process for both tablets probably took a minute together.
In the photos, it may seem that when the window is closed, there is a very small gap on one side, but it is not something significant and it is a problem caused by the case and not the camera cover. However, as you can see, once it is closed, the camera is not visible.
While the window may feel loose when moved by hand, I tried shaking the devices up and down, and even accidentally dropped one, but it did not move. It remained covering the camera unless I moved it with my hand.
In conclusion, I believe that it is worth the purchase. The only problem with the product was that one of them did not stick on one side. I applied a little glue and everything was fine. The window may seem loose, but in my case, it only moves if I push it with my finger. Any other problem I found was only in one of the two devices and it is a result of the case alone. The installation is quick and easy, unless someone has thicker fingers and may struggle a bit. If you don't have mini tweezers, eyebrow tweezers, or a small tool, ask a woman in the house to lend you her eyebrow tweezers. Measure where it should go before removing the protective layer on the back, and then it's a matter of seconds. I don't know how long they will last, but theoretically, there should be no problem. And if something comes up, it can be fixed with a little glue on the cases.
Έρχονται σε συσκευασία των τριών. Σε διαστάσεις είναι μικρά όποτε θεωρητικά θα βολέψουν και κάποια κινητά, προσωπικά δε το δοκίμασα καθώς η πρόσθια κάμερα ήδη χαλάει της αισθητική της οθόνης τόσο στο One Plus 6 όσο και στο 7t και στο Xiaomi note 9 Pro.
Στο πίσω μέρος έχουν ένα μικρό πλαστικό φύλλο που αφαιρείται πριν την εγκατάσταση και ουσιαστικά προστατεύει την κόλλα που έχει για να κολλήσει πάνω στις επιφάνειες. Για την εγκατάσταση θα πω τα εξής:
1. Στο πρώτο iPad μπήκε εύκολα χωρίς να κάνω κάτι πέραν του να υπολογίσω που ακριβώς πρέπει να μπει.
2. Στο δεύτερο iPad που είναι αυτό στις photo που ανέβασα, ήταν λίγο περίεργη η διαδικασία γιατί του φοράω spingen θήκη και συνήθως αυτές έχουν σχετικά μεγάλο άνοιγμα στις κάμερες. Όποτε καλο θα είναι πριν ξεκολλήσετε το προστατευτικό να κάνετε μια δοκιμή που περίπου το θέλετε, αν έχετε παρόμοιες θήκες. Το ένα από τα τρία της συσκευασίας (αυτό στο δεύτερο iPad) χρειάστηκε να βάλω μια πολύ μικρή σταγόνα κολλάς στιγμής γιατί ξεκόλλησε από τη μια πλευρά. Δεν ξέρω αν θα το έκανα γενικά ή αν θα χρησιμοποιούσα το τρίτο της συσκευασίας αλλά μιας και Ασχολήθηκα να κολλήσω κάτι στη θήκες που έσπασε (μετράει τρία γεμάτα χρόνια και αυτή), έβαλα και σε αυτό.
3. Γενικά το να τοποθετηθούν για εμένα ήταν πολύ εύκολη διαδικασία γιατί είχα μια από τις μπροσελες που χρησιμοποιώ όταν εκτυπώνω ή ζωγραφίζω μινιατούρες και η όλη διαδικασία και στα δυο ταμπλετ πρέπει να πήρε ένα λεπτό μαζί.
Στις φωτο ίσως φαίνεται ότι όταν είναι κλειστό το παραθυράκι, αφήνει ένα πολύ μικρό κενό από τη μια μεριά αλλά δεν είναι κάτι το ιδιαίτερο και είναι πρόβλημα που δημιουργεί η θήκη και όχι το σκιάστρο της κάμερας. Όπως θα δείτε πάντως, άπαξ και κλείσει, δε δείχνει τίποτα η κάμερα.
Το παραθυράκι ενώ όταν κινείται με το χέρι νιώθετε ότι είναι χαλαρό, δοκίμασα να κουνάω τις συσκευές πάνω-κάτω, μου έπεσε και η μια κατά λάθος, δεν κουνήθηκε. Έμεινε να καλύπτει την κάμερα εκτός κι αν το κουνήσω με το χέρι.
Καταλήγοντας τελικά, πιστεύω ότι αξίζει η αγορά, το μόνο πρόβλημα από το προϊόν ήταν στο ένα από αυτά από τη μια μεριά δεν κολλούσε. Έβαλα λίγο κόλλα και όλα οκ. Το παραθυράκι μπορεί να σας φανεί χαλαρό αλλά στην δίκη μου περίπτωση ΜΟΝΟ εάν το σπρώξω με το δάχτυλο θα μετακινηθεί. Οποίο αλλο πρόβλημα βρήκα, ήταν μόνο στη μια από τις δυο συσκευές και είναι αποτέλεσμα της θήκης και μόνο. Γρήγορη και εύκολη εγκατάσταση εκτός κι αν κάποιος έχει πιο χοντρά δάχτυλα και ίσως δυσκολεύεται λίγο. Αν δεν έχετε κάποια μίνι πένσα, μυτοτσιμπιδο ή μπροσελα, αν υπάρχει γυναίκα στο σπίτι πάρτε της για λιγο το τσιμπιδάκι για τα φρύδια. Μετρήστε που θα μπει πριν αφαιρέσετε το προστατευτικό της πισω μεριάς και μετά είναι υπόθεση δευτερολέπτων. Δε γνωρίζω σε βάθος χρόνου αν θα κρατήσουν αλλά θεωρητικά δε θα υπάρχει πρόβλημα. Και να παρουσιαστεί κάτι, στις θήκες με λίγη κόλλα διορθώνεται.