Skroutz.mt

Hager Automatic Circuit Breaker 50A Single-pole AC MCN150A
Automatic Circuit Breaker

Hager Automatic Circuit Breaker 50A Single-pole AC MCN150A

  • Control and protection of circuits against short circuits and overloads
  • Allow circuit isolation
  • Accept auxiliary contacts
  • Curve C: 5 to 10 ln
  • Rated voltage: 240/400V AC
  • Rated current: 0.5 to 63A
  • Frequency:...
  • Control and protection of circuits against short circuits and overloads
  • Allow circuit isolation
  • Accept auxiliary contacts
  • Curve C: 5 to 10 ln
  • Rated voltage: 240/400V AC
  • Rated current: 0.5 to 63A
  • Frequency: 50/60Hz
  • Built-in label holder
  • Cable cross-section: single-core cable 25mm², flexible cable 16mm²
  • Standard: IEC EN 60898-1
See full description See full description
Review the product
Product report

Description

Description

  • Control and protection of circuits against short circuits and overloads
  • Allow circuit isolation
  • Accept auxiliary contacts
  • Curve C: 5 to 10 ln
  • Rated voltage: 240/400V AC
  • Rated current: 0.5 to 63A
  • Frequency: 50/60Hz
  • Built-in label holder
  • Cable cross-section: single-core cable 25mm², flexible cable 16mm²
  • Standard: IEC EN 60898-1

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Number of Poles
1
Rated Current
50 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

  • Control and protection of circuits against short circuits and overloads
  • Allow circuit isolation
  • Accept auxiliary contacts
  • Curve C: 5 to 10 ln
  • Rated voltage: 240/400V AC
  • Rated current: 0.5 to 63A
  • Frequency: 50/60Hz
  • Built-in label holder
  • Cable cross-section: single-core cable 25mm², flexible cable 16mm²
  • Standard: IEC EN 60898-1

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Number of Poles
1
Rated Current
50 A
Operating Curve
Curve C

Operating Curve

The tripping curve shows the time required for the circuit breaker to switch off in relation to the current passing through it. For small overcurrents, the tripping is delayed to avoid unnecessary interruptions, while for very high values, such as in the case of a short circuit, the breaker operates immediately to protect the circuit. Different types of curves are used depending on the needs of each installation and the type of loads.

Curve C

The most common in general installations, ideal for circuits with motors or electronic devices.

Power Supply

AC
Yes
DC
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

9,15 €
14,00 €   shipping cost