Isomat Asphaltos cold-applied asphalt mix is ready to use for local repairs to asphalt or concrete road surfaces. It fills potholes on roads, bridges, in parking areas and courtyards without mixing, and the surface can be opened to traffic immediately.
The material is black, remains flexible without cracking due to expansion and contraction, and bonds to the substrate. It withstands weather conditions and the passage of time, and requires no special equipment to apply.
- Type: Ready-to-use cold asphalt mix
- Colour: Black
- Density of uncompacted mix: 1.50 ± 0.10 kg/l
- Density of compacted mix: 2.00 ± 0.10 kg/l
- Application temperature: From -40 °C to +60 °C
- Consumption: Approximately 25 kg/m² per cm of layer thickness
- Application: Without mixing or stirring, in almost any weather conditions except rain
- Surface preparation: Remove dust, oils and loose material; ensure there is no standing water
- Repair depth: For repairs deeper than 15 cm, laying and compacting gravel is recommended first; shallow defects should be cut into a rectangular shape to a depth of at least 5 cm
- Filling: Place the material so that it protrudes 1–2 cm above the road surface
- Compaction: Using a shovel, roller or car tyres
- Shelf life: 12 months from production, in a sealed container
- Packaging: 25 kg container
Dimensions
- Emulsion
- No
Properties
- Waterproofer
- No
- Plasticizer
- No
- Antifreeze
- No
- Set Retarder
- No
Weight
- Grams
- 25000 gr
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.