Skroutz.mt

Astral Pool Pool Pump Victoria Plus Silent Filter Single-Phase with Horsepower 1hp and Maximum Water Flow 16000 liters/hour
Pool Water Pumps

Astral Pool Pool Pump Victoria Plus Silent Filter Single-Phase with Horsepower 1hp and Maximum Water Flow 16000 liters/hour

Key features:

  • Maximum Flow Rate: 16000 liters/hour
  • Low Noise Level: 61-70dBA
See full description

Top specs

  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Small (up to 50 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

  • Noise Level

    Indicates how much noise the pump makes when operating. The lower the value (ideally below 60-65 dB), the less the motor can be heard in the pool environment.
  • Pump Weight 14 kg
  • See all

User Manual

479,88 €
455 89 €
-23,99€
expires in 1 month
Delivery Mon, 14 Sep - Fri, 18 Sep
23,00 €   shipping cost
Sent from Greece
From Pisinaspa
Greece
1 piece
See Swimming Pool Equipment on the page of Pisinaspa

Learn more about invoicing
Product report

Description

Description

The Victoria Plus pump provides better support for the pump and motor as required with lower noise levels, making it suitable for both commercial and residential use, offering high performance and featuring a robust design that guarantees their durability over time.

  • Maximum Flow Rate: 21500 liters/hour
  • Pool Water Volume: 75m3
  • Pre-filter
  • Low Noise Level: between 61 dB and 70 dB.
  • Easy to Use: Pre-filter lid with 2 levers included (no key required).
  • Compatibility: Fully compatible with pools equipped with Victoria Plus pump.
  • Larger front bearing for improved axial thrust.
  • PVC components

Details

Self-priming pump with single-phase and three-phase motors. A pre-filter is installed in the pump body to prevent foreign objects from entering and potentially damaging the hydraulic parts. The provided motors have an IP-55 protection rating and are designed to withstand hot environments and high humidity levels.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Main Specifications

Type
Filter
Power (hp)
1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Noise Level
70 dB

Noise Level

Indicates how much noise the pump makes when operating. The lower the value (ideally below 60-65 dB), the less the motor can be heard in the pool environment.
Pump Weight
14 kg
Filter Included
No

Performance

Maximum Supply
16000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
17 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (2)

Reviews

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • alan_lyons
    5
    alan_lyons

    Verified purchase

    Fitted in my pool machine room to replace a 20 year old one, working fine. Time will tell if it stands up to the previous one.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    stavros_batzatsos

    Verified purchase

    This review is about the power: 2hp

Description & Specifications

The Victoria Plus pump provides better support for the pump and motor as required with lower noise levels, making it suitable for both commercial and residential use, offering high performance and featuring a robust design that guarantees their durability over time.

  • Maximum Flow Rate: 21500 liters/hour
  • Pool Water Volume: 75m3
  • Pre-filter
  • Low Noise Level: between 61 dB and 70 dB.
  • Easy to Use: Pre-filter lid with 2 levers included (no key required).
  • Compatibility: Fully compatible with pools equipped with Victoria Plus pump.
  • Larger front bearing for improved axial thrust.
  • PVC components

Details

Self-priming pump with single-phase and three-phase motors. A pre-filter is installed in the pump body to prevent foreign objects from entering and potentially damaging the hydraulic parts. The provided motors have an IP-55 protection rating and are designed to withstand hot environments and high humidity levels.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Main Specifications

Type
Filter
Power (hp)
1 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Noise Level
70 dB

Noise Level

Indicates how much noise the pump makes when operating. The lower the value (ideally below 60-65 dB), the less the motor can be heard in the pool environment.
Pump Weight
14 kg
Filter Included
No

Performance

Maximum Supply
16000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
17 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
50 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (2)

5.0
2
5.0
Review this product
  1. 2
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • alan_lyons
    5
    alan_lyons

    Verified purchase

    Fitted in my pool machine room to replace a 20 year old one, working fine. Time will tell if it stands up to the previous one.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    stavros_batzatsos

    Verified purchase

    This review is about the power: 2hp

455,89 €
23,00 €   shipping cost