Skroutz.mt

vidaXL Single-Phase Pool Water Pump Filter With Power 0.8hp And Maximum Water Supply 17000 lt/h
Pool Water Pumps

vidaXL Single-Phase Pool Water Pump Filter With Power 0.8hp And Maximum Water Supply 17000 lt/h

Key features:

  • Maximum Flow Rate: 17000 liters/hour
  • Power Supply: 220-240 V~, 50 Hz
  • Maximum Head: 8 m
  • Maximum Operating Pressure: 3.5 bar
  • Suitable Water Temperature: 0-45°C
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Small (up to 50 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • See all
Review the product
Product report

Description

Description

The sand filter pump is designed to help maintain the cleanliness of the pool and be free from debris.

Durable Filter Tank

The sand filter can filter 17000 liters per hour and has a corrosion-resistant filter tank with resistance to chlorinated pool water. Additionally, it has an additional pre-filter to keep dust away from the coarse sand filter. It has a multi-valve for easy operation and a convenient pressure gauge. The top design of the flange clamp allows for 360-degree rotation for easy installation. For secure placement, the set includes a base with fastening capability.

Reinforced Plastic Casing

Thanks to its reinforced plastic casing, this pool filter pump is weather resistant. It is compatible with most above-ground pools with a 3.8 cm connection.

It can be connected to pipes with a diameter of 32 mm or 38 mm. This product is GS certified, indicating that it meets the highest safety standards.

Benefits

  • Dimensions: 350 x 502 x 655 mm (L x W x H)
  • Power supply: 220-240 V~, 50 Hz
  • Power: 600 W
  • Connection diameter: 3.8 cm
  • Filter diameter: 35.6 cm (14")
  • Maximum head: 8 m
  • Maximum pump flow rate: 17000 liters/hour
  • Maximum operating pressure: 3.5 bar
  • Suitable water temperature: 0-45°C
  • Flow rate: 44 GPM / 10 m³/hour
  • With pre-filter
  • Requires 27 kg of sand for filters (not included)
  • GS certification
  • Protection class: IPX5
  • Product suitable for pipes with a diameter of 32 mm and 38 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
0.8 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
600 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Filter Included
No

Performance

Maximum Supply
17000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
8 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
38 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The sand filter pump is designed to help maintain the cleanliness of the pool and be free from debris.

Durable Filter Tank

The sand filter can filter 17000 liters per hour and has a corrosion-resistant filter tank with resistance to chlorinated pool water. Additionally, it has an additional pre-filter to keep dust away from the coarse sand filter. It has a multi-valve for easy operation and a convenient pressure gauge. The top design of the flange clamp allows for 360-degree rotation for easy installation. For secure placement, the set includes a base with fastening capability.

Reinforced Plastic Casing

Thanks to its reinforced plastic casing, this pool filter pump is weather resistant. It is compatible with most above-ground pools with a 3.8 cm connection.

It can be connected to pipes with a diameter of 32 mm or 38 mm. This product is GS certified, indicating that it meets the highest safety standards.

Benefits

  • Dimensions: 350 x 502 x 655 mm (L x W x H)
  • Power supply: 220-240 V~, 50 Hz
  • Power: 600 W
  • Connection diameter: 3.8 cm
  • Filter diameter: 35.6 cm (14")
  • Maximum head: 8 m
  • Maximum pump flow rate: 17000 liters/hour
  • Maximum operating pressure: 3.5 bar
  • Suitable water temperature: 0-45°C
  • Flow rate: 44 GPM / 10 m³/hour
  • With pre-filter
  • Requires 27 kg of sand for filters (not included)
  • GS certification
  • Protection class: IPX5
  • Product suitable for pipes with a diameter of 32 mm and 38 mm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
0.8 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
600 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Filter Included
No

Performance

Maximum Supply
17000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
8 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Installation

Connection Nozzle
38 mm

Connection Nozzle

Indicates the diameter of the pipe that can be connected to the pump.

  • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
  • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

Tip: Check the diameter of your existing pipes before making a selection.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

449,82 €
23,00 €   shipping cost