Skroutz.mt

Bosch GEX 34-150 Electric Eccentric Sander 150mm Electric 340W with Speed Control and with Suction System 0601372800
Sanders

Bosch GEX 34-150 Electric Eccentric Sander 150mm Electric 340W with Speed Control and with Suction System 0601372800

Key features:

  • Grinding disc diameter: 150 mm
  • Orbit diameter: 4 mm
  • Eccentricity: 2 mm
  • Weight: 2.1 kg
See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2

    Very fine sanding, sensitive materials, finishing

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2100 gr
  • See all
Review the product
Product report

Description

Description

This random orbital sander is intended for sanding, intermediate sanding, varnish removal, and surface finishing on wood, veneer, varnish, and filler material, as well as on mineral and acrylic surfaces. Compatible with Bosch's Click & Clean system.

The aluminum flange ensures a long tool life and makes it perfect for tough applications. For using sanding sheets with different hole patterns, the GEX 34-150 is equipped with a multi-hole sanding pad which also leads to significantly increased dust extraction.

It also features a dust container equipped with an integrated Bosch microfilter system and a 150 mm sanding pad equipped with a self-adhesive system for securing sanding sheets and speed selection.

Specifications

  • Disc diameter: 150 mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2 mm
  • Nominal input power: 340 W
  • Weight: 2.1 kg
  • Tool dimensions (width): 150 mm
  • Tool dimensions (length): 315 mm
  • Tool dimensions (height): 190 mm
  • Orbit diameter: 4 mm
  • Packaging dimensions (width x length x height): 210 x 355 x 160 mm
  • Voltage: 230 V

Advantages

  • Constant speed and high material removal performance for excellent results even on demanding surfaces
  • Aluminum bearing flange ensures long tool life and makes it ideal for use in tough applications
  • Multi-hole sanding pad for sanding sheets with different hole patterns and significantly increased dust extraction

What's included:

  • 1 multi-hole sanding sheet 
  • Sanding disc (150 mm) 

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
340 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
2100 gr
Cable Length
5 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
81 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

This random orbital sander is intended for sanding, intermediate sanding, varnish removal, and surface finishing on wood, veneer, varnish, and filler material, as well as on mineral and acrylic surfaces. Compatible with Bosch's Click & Clean system.

The aluminum flange ensures a long tool life and makes it perfect for tough applications. For using sanding sheets with different hole patterns, the GEX 34-150 is equipped with a multi-hole sanding pad which also leads to significantly increased dust extraction.

It also features a dust container equipped with an integrated Bosch microfilter system and a 150 mm sanding pad equipped with a self-adhesive system for securing sanding sheets and speed selection.

Specifications

  • Disc diameter: 150 mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2 mm
  • Nominal input power: 340 W
  • Weight: 2.1 kg
  • Tool dimensions (width): 150 mm
  • Tool dimensions (length): 315 mm
  • Tool dimensions (height): 190 mm
  • Orbit diameter: 4 mm
  • Packaging dimensions (width x length x height): 210 x 355 x 160 mm
  • Voltage: 230 V

Advantages

  • Constant speed and high material removal performance for excellent results even on demanding surfaces
  • Aluminum bearing flange ensures long tool life and makes it ideal for use in tough applications
  • Multi-hole sanding pad for sanding sheets with different hole patterns and significantly increased dust extraction

What's included:

  • 1 multi-hole sanding sheet 
  • Sanding disc (150 mm) 

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
340 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2 mm

Eccentricity: 2

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


Very fine sanding, sensitive materials, finishing
Net Weight
2100 gr
Cable Length
5 m
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
81 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
150 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

272,30 €
14,00 €   shipping cost