Skroutz.mt

vidaXL Pool Pump Filter Single-Phase with Horsepower 0.25hp and Maximum Water Flow 8000 liters/hour
Pool Water Pumps

vidaXL Pool Pump Filter Single-Phase with Horsepower 0.25hp and Maximum Water Flow 8000 liters/hour

Key features:

  • Maximum Flow Rate: 8000 liters/hour
  • Power Supply: 220-240 V~
  • Maximum Head: 7.8 m
  • Horsepower: 0.25 HP, 250 W
  • Dimensions: 411 x 152 x 234 mm
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Small (up to 50 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Flow rate (max)

    Shows how many liters of water the pump can deliver in 1 hour.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.
  • See all
237 57 €
Delivery Mon, 17 Aug - Fri, 21 Aug
23,00 €   shipping cost
Sent from Greece
From myhomiq
Greece
12 pieces
See Swimming Pool Equipment on the page of myhomiq
Review the product
Product report

Description

Description

The heavy-duty pool pump is an excellent choice for above-ground pools and serves as part of the circulation system to keep the water clean.

Construction made of steel and plastic

The water pump features a construction made of steel and plastic, making it durable and resistant to chlorine. It is equipped with a stainless steel shaft. Thanks to the powerful 0.25 horsepower motor, this pump is very sturdy, while the noise level during operation is low.

Functionality

Through the control panel, you can choose between 8 timers (2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 12 hours, 16 hours, 24 hours) and one of the 2 modes (continuous operation and single cycle operation). For example, if you select a 4-hour timer in continuous operation, the pump will run for 4 hours and restart its operation the next day. If you select a 4-hour timer in single cycle operation, the pump will run for 4 hours and will not operate again until the power is reconnected. To switch timers, make sure the pump is stopped and simply press the timer button for more than 10 seconds.

Benefits

  • Color: Black
  • Material: Steel and plastic
  • Dimensions: 411 x 152 x 234 mm (L x W x H)
  • Connection size: 38 mm
  • Power supply: 220-240 V~
  • Current intensity: 1 A
  • IP protection rating: IPX5
  • Maximum head: 7.8 m
  • Horsepower: 0.25 HP, 250 W
  • Max flow rate: 8000 liters/hour
  • Stainless steel shaft
  • With chlorine resistance
  • With 2 modes: Continuous and single cycle
  • With 8 timers: 2, 4, 6, 8, 10, 12, 16, 24 hours

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Main Specifications

Type
Filter
Power (hp)
0.25 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
250 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Filter Included
No

Performance

Maximum Supply
8000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
7.8 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The heavy-duty pool pump is an excellent choice for above-ground pools and serves as part of the circulation system to keep the water clean.

Construction made of steel and plastic

The water pump features a construction made of steel and plastic, making it durable and resistant to chlorine. It is equipped with a stainless steel shaft. Thanks to the powerful 0.25 horsepower motor, this pump is very sturdy, while the noise level during operation is low.

Functionality

Through the control panel, you can choose between 8 timers (2 hours, 4 hours, 6 hours, 8 hours, 10 hours, 12 hours, 16 hours, 24 hours) and one of the 2 modes (continuous operation and single cycle operation). For example, if you select a 4-hour timer in continuous operation, the pump will run for 4 hours and restart its operation the next day. If you select a 4-hour timer in single cycle operation, the pump will run for 4 hours and will not operate again until the power is reconnected. To switch timers, make sure the pump is stopped and simply press the timer button for more than 10 seconds.

Benefits

  • Color: Black
  • Material: Steel and plastic
  • Dimensions: 411 x 152 x 234 mm (L x W x H)
  • Connection size: 38 mm
  • Power supply: 220-240 V~
  • Current intensity: 1 A
  • IP protection rating: IPX5
  • Maximum head: 7.8 m
  • Horsepower: 0.25 HP, 250 W
  • Max flow rate: 8000 liters/hour
  • Stainless steel shaft
  • With chlorine resistance
  • With 2 modes: Continuous and single cycle
  • With 8 timers: 2, 4, 6, 8, 10, 12, 16, 24 hours

Manufacturer

Manufacturer Details

Warnings & Safety Information

Main Specifications

Type
Filter
Power (hp)
0.25 hp

Power (hp)

Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
Power (Watt)
250 W
Power Source
Single-Phase

Power Source

Single-Phase

Operates with standard household electricity (230V). It is suitable for residential pools.
Motor Type
Constant Speed

Motor Type

Constant Speed

The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
Suitable for Saltwater
No

Suitable for Saltwater

Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
Pool Size
Small (up to 50 m³)
Filter Included
No

Performance

Maximum Supply
8000 lt/h

Maximum Supply

Shows how many liters of water the pump can deliver in 1 hour.
Maximum Head of a Pump
7.8 m

Maximum Head of a Pump

Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

237,57 €
23,00 €   shipping cost