Overall, it is very good and beautiful. However, I needed help to make it work because the instructions that came with it (a small piece of paper with 5-6 steps) were probably not suitable or sufficient for the remote control I was copying from (a V2 Phox 433), even though it is on the list of compatible ones (but neither did the PDF with the instructions from the store where I bought it work for direct copying from one remote control to another, even though I made sure to declare it on the garage door panel according to the instructions). I tried copying the rolling code and the fixed code, but it seems that the reason I couldn't do it is because the original remote control must be used, while I only had a copied remote control from before.
So I called a friend who knew how to program it directly from the garage door electronic box. He held down one of the 4 buttons on the new remote control (without any copying) and simply declared it on the panel by pressing the appropriate button on the garage door panel, and it worked fine. However, it took 3-4 attempts for the panel to accept the new remote control, and it also did not accept the button I wanted, so we ended up using another one of the 4 buttons.
In short, if the remote control you want to copy from is the original one, then the simple instructions that come with it might work. If not, then you will probably only need to declare the new remote control on the panel. The price at 10.50 is good and I think it's worth a try because if you encounter any problem with it, it is likely that you will have the same problem with any other remote control.
Check the compatibility list in the PDF (at the bottom)
http://www.tele.gr/PDF4/yet-2130_smart_copy_gr_ver_1_1.pdf
-------------
Update 1 year later: It continues to work fine even though it has fallen several times. The range is at least 15m (including from inside the car), I don't know why others only write 5m range.
Γενικά είναι πολύ καλό και όμορφο. Χρειάστηκα όμως βοήθεια για να το κάνω να δουλέψει γιατί οι οδηγίες με τις οποίες ήρθε (ένα μικρό χαρτάκι με 5-6 βήματα) μάλλον δεν ήταν οι κατάλληλες ή επαρκείς για το χειριστήριο απο το οποίο αντέγραφα (ένα V2 Phox 433) παρόλο που είναι στη λίστα με τα συμβατά (αλλά ούτε και το pdf με τις οδηγίες απο το κατάστημα που το αγόρασα δούλεψαν για την απευθείας αντιγραφή απο το ένα τηλεκοντρόλ στο άλλο, παρόλο που φρόντισα να το δηλώσω στο πάνελ της γκαραζόπορτας συμφωνα με τις οδηγίες). Δοκίμασα και την αντιγραφή κυλιόμενου κωδικού και την αντιγραφη σταθερου κωδικού αλλά μάλλον ο λόγος που δεν τα κατάφερα είναι γιατί πρέπει να χρησιμοποιηθεί το original πρωτοτυπο χειριστήριο, ενώ εγώ έιχα μόνο ένα αντιγραμμένο χειριστήριο απο παλαιότερα.
Έτσι κάλεσα έναν φίλο που ήξερε να το προγραμματίσει απευθείας απο το ηλεκτρονικό κουτί της γκαραζόπορτας. Κράτησε πατημένο ένα απο τα 4 κουμπιά του νέου τηλεκοντρόλ (χωρίς καμία αντιγραφή) και απλά το δήλωσε στο πάνελ πατώντας το κατάλληλο κουμπάκι στο πανελ της γκαραζόπορτας και έτσι δούλεψε κανονικά. Χρειάστηκε όμως 3-4 προσπάθειες μέχρι να δεχτεί το πανελ το νέο χειριστήριο, και επίσης δεν δεχτηκε το κουμπι που ήθελα και τελικά το βάλαμε σε ένα άλλο απο τα 4.
Με λίγα λόγια, αν το χειριστήριο απο το οποίο θέλετε να αντιγράψετε είναι το αυθεντικό, τότε ίσως δουλέψουν και οι απλές οδηγίες με τις οποίες θα έρθει. Αν όχι, τότε μάλλον θα χρειαστεί να κάνετε μόνο την δήλωση του νεου τηλεκοντρόλ στο πάνελ. Η τιμή του στα 10.50 είναι καλή και νομίζω αξίζει την δοκιμή, γιατί αν είναι αν συναντήσετε κάποιο πρόβλημα με αυτό το πιθανότερο είναι να έχετε το ίδιο πρόβλημα και με οποιοδήποτε άλλο.
Δείτε την λίστα συμβατότητας στο pdf (τέρμα κάτω)
http://www.tele.gr/PDF4/yet-2130_smart_copy_gr_ver_1_1.pdf
-------------
Update 1 χρονο μετά: Συνεχίζει να λειτουργεί κανονικά παρόλο που έπεσε κάτω αρκετες φορές. Η εμβέλεια είναι τουλάχιστον 15μ (και μέσα απο το αυτοκίνητο), δεν ξέρω γιατί άλλοι γράφουν μόνο 5μ εμβέλεια.