The D-Link DGS-1100-08PV2 managed Layer 2 switch connects devices through 8 Gigabit Ethernet ports with PoE+ and is powered by an external power adapter. Web UI management includes features such as VLAN, Spanning Tree Protocol (STP) and static link aggregation, while Quality of Service (QoS) prioritizes traffic. Surveillance VLAN prioritizes IP surveillance traffic, while Loopback Detection and Cable Diagnostics help identify network and cable issues.
The metal enclosure is fanless. D-Link Green technology and the IEEE 802.3az Energy Efficient Ethernet (EEE) standard help reduce power consumption, including when there is no network traffic.
- Type: Managed Layer 2 Switch
- Ports: 8 x 10/100/1000 Mbps Gigabit Ethernet with PoE+
- PoE standards: IEEE 802.3af/802.3at
- PoE power: Up to 64 W total and up to 30 W per port
- Switching capacity: 16 Gbps
- Packet forwarding rate: 11.9 Mpps
- MAC address table: 4K entries
- Packet buffer: 1.5 Mbits
- Flash memory: 2 Mbytes
- Management: Web UI with IPv4 support, D-Link Network Assistant (DNA)
- Layer 2 features: Spanning Tree Protocol (STP), static link aggregation with 2 groups, 802.3x Flow Control, HOL Blocking Prevention, Auto-negotiation, Auto MDI/MDIX
- VLAN: Port-based, 802.1Q Tagged, Management, Surveillance, Voice and Asymmetric VLAN, up to 32 static VLAN groups and 4094 VIDs
- Quality of Service: 802.1p QoS, 4 queues, WRR Mode, DSCP and per-port bandwidth control for ingress and egress traffic with a minimum increment of 8 Kb/s
- Network security: Static MAC with up to 32 entries, traffic segmentation, port security and Broadcast/Multicast/Unknown Unicast Storm Control
- IGMP Snooping: IGMP v1/v2, up to 128 groups
- Diagnostics: Loopback Detection and Cable Diagnostics
- Port monitoring: One-to-One and Many-to-One Port Mirroring, Tx Ok, Tx Error, Rx Ok and Rx Error statistics
- Jumbo frame size: Up to 9216 Bytes
- Duplex mode: Half/full-duplex at 10/100 Mbps, full-duplex at 1000 Mbps
- Network standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x and IEEE 802.3az
- RFC standards: RFC768 UDP, RFC791 IP, RFC792 ICMP, RFC793 TCP, RFC826 ARP, RFC2236 IGMP Snooping, RFC1213 MIBII and RFC1215 MIB Traps Convention
- Power supply: External 100–240 VAC, 50/60 Hz power adapter
- Power consumption: 77.9 W with PoE enabled, 4.6 W with PoE disabled and 2 W in standby
- Construction: Fanless metal enclosure
- Noise level: 0 dB(A)
- Heat dissipation: 265.85 BTU/h
- MTBF: 786,841 hours
- Operating temperature: 0 to 40 °C
- Storage temperature: -40 to 70 °C
- Operating humidity: 0% to 90% RH, non-condensing
- Storage humidity: 0% to 95% RH, non-condensing
- EMI certifications: FCC Class B, CE Class B, VCCI Class B, BSMI
- Safety certifications: cUL, CE LVD, CB, BSMI
- Compliance: RoHS 10
- Dimensions: 171 x 97.8 x 28.6 mm
- Weight: 0.43 kg
Network Specifications
- Type
- Managed
- Layer
- L2
- PoE
- Yes
- PoE Version
- 802.3at
Technical Specifications
- Ethernet connections
- 8 Port
- Ethernet Speed
- 100 Mbps, 1000 Mbps
- Switching Speed
- 16 Gbps
- MAC Address Table
- 8000 entries
- Rack mounting
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.