The "inverter" type power control with an electronic brain ensures the regulation of the water temperature at a constant value from 30°C to 60°C, achieving better energy savings. It operates by automatically reducing its power (in kW), measuring the inlet-outlet temperature in relation to the water flow.

Ability to store up to three water outlet temperatures according to user habits. Easily set up to 3 temperature memories for use, e.g., sink, shower, bath.

Possibility of collaboration of the instant water heater with a solar water heater, heat pump, or boiler room boiler, allowing the instant water heater to receive preheated water up to 60°C from other systems, according to the priority settings that have been set.

4 different power levels in 1 device, allowing the user to select the desired power. Specifically, the device can be set to a higher power level of 17, 18, 21, or 24 kW.

The temperature lock allows the user to set the maximum water temperature to prevent injuries/burns, e.g., for children.

• With a flow switch that activates the device only with water flow.
• With an incoming water temperature control sensor.
• With an outgoing water temperature control sensor.
• With a safety thermostat for overheating protection.

It is central and can be used either as the main option for heating the water in your home or as a supplementary one. It can provide hot water throughout the house for your daily needs, as long as there are appropriate pipes for the distribution of hot water. This may potentially result in heat and energy losses due to the distance.

The instant water heater is a type of water heater that heats water in real-time. It only heats the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts in the resistance and other components.

It operates with electricity and is three-phase, meaning that a three-phase supply is required.

The instant water heater has a cold water inlet pipe, which passes through the resistance, heats up, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is that the pressure of the incoming cold water is not too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are preset so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature that it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 11.6 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• An electronic instant water heater is an ideal solution for hot water.
• With energy class A and "inverter" type for comfort and economy.
• They allow immediate consumption of hot water without losses.
• Continuous hot water operation without storage and limitations.
• It is a safe device without pollutants, fumes, and problems.
• Up to 60% savings compared to conventional water heaters.
• Up to 30% savings compared to mechanical instant water heaters.
• They consume electricity only for the hot water that is drawn at the time.
• There is no energy loss because they are placed near the taps.
• Storage of hot water in water heaters is avoided.
• They can also be combined with solar systems (for greater savings).
• With silent operation, small size, and installation everywhere.
• Application in permanent, holiday homes, and professional spaces.