Skroutz.mt

Bosch GEX 34-125 Electric Eccentric Sander 125mm Electric 340W with Speed Control and with Suction System 0601372300
Sanders

Bosch GEX 34-125 Electric Eccentric Sander 125mm Electric 340W with Speed Control and with Suction System 0601372300

GEX 34-125 Professional Random Orbital Sander Ø125mm 340W

Features:

  • Sanding disc diameter: Ø125mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2.5 mm...

GEX 34-125 Professional Random Orbital Sander Ø125mm 340W

Features:

  • Sanding disc diameter: Ø125mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2.5 mm
  • Sanding material attachment: Self-adhesive
  • Nominal input power: 340 W
  • Orbit diameter: 5 mm
  • Vibration emission value ah: 7.5 m/s²
  • Uncertainty K: 1.5 m/s²
  • Sound...
See full description See full description

  • Power

    Indicates the power of the motor.

    Higher power → stronger material removal and more effective sanding, especially on hard materials.

  • Speed Setting

    Ability to control the rotation speed of the tool.

    1

  • Eccentricity

    Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).

    2.5

    General sanding, finishing of wood or paint.

  • Oscillations

    • High number of strokes → more intense and faster sanding
    • Low number → gentler, suitable for sensitive surfaces

  • RPM (Revolutions Per Minute)

    • High speeds → fast material removal
    • Low speeds → finer, more controlled finish
  • Weight (Net) 2000 gr
  • See all
238 90 €
Delivery by Fri, 10 Jul
14,00 €   shipping cost
Sent from Greece
From Xristou 5.0 (40)
5.0 (40 reviews)
Greece
1 piece
See Power Tools on the page of Xristou
Review the product
Product report

Description

Description

GEX 34-125 Professional Random Orbital Sander Ø125mm 340W

Features:

  • Sanding disc diameter: Ø125mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2.5 mm
  • Sanding material attachment: Self-adhesive
  • Nominal input power: 340 W
  • Orbit diameter: 5 mm
  • Vibration emission value ah: 7.5 m/s²
  • Uncertainty K: 1.5 m/s²
  • Sound pressure level: 78 dB(A)
  • Uncertainty K: 3 dB
  • Tool dimensions (width): 125 mm
  • Tool dimensions (length): 305 mm
  • Tool dimensions (height): 190 mm
  • Weight: 2.0 Kg

Description:

The GEX 34-125 is a professional electric random orbital sander with high material removal performance in the 125 mm category. The constant speed and high material removal performance provide excellent results on demanding surfaces. The aluminum bearing flange ensures a long tool life. Equipped with a multi-hole sanding pad, it uses sanding sheets with different hole patterns and significantly increases dust extraction. It is ideal for sanding, intermediate sanding, varnish removal, and surface finishing on wood, veneer, varnish, and filler material as well as on mineral and acrylic surfaces. It features a dust container with an integrated Bosch microfilter system and a 125 mm sanding pad with a self-adhesive system.

Includes:

  • 1 Multi-hole sanding sheet
  • Sanding disc (Ø125mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
340 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2.5 mm

Eccentricity: 2.5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2000 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
78 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

GEX 34-125 Professional Random Orbital Sander Ø125mm 340W

Features:

  • Sanding disc diameter: Ø125mm
  • Nominal speed: 4,500 – 12,000 min-1
  • Number of oscillations: 9,000 – 24,000 min-1
  • Eccentricity: 2.5 mm
  • Sanding material attachment: Self-adhesive
  • Nominal input power: 340 W
  • Orbit diameter: 5 mm
  • Vibration emission value ah: 7.5 m/s²
  • Uncertainty K: 1.5 m/s²
  • Sound pressure level: 78 dB(A)
  • Uncertainty K: 3 dB
  • Tool dimensions (width): 125 mm
  • Tool dimensions (length): 305 mm
  • Tool dimensions (height): 190 mm
  • Weight: 2.0 Kg

Description:

The GEX 34-125 is a professional electric random orbital sander with high material removal performance in the 125 mm category. The constant speed and high material removal performance provide excellent results on demanding surfaces. The aluminum bearing flange ensures a long tool life. Equipped with a multi-hole sanding pad, it uses sanding sheets with different hole patterns and significantly increases dust extraction. It is ideal for sanding, intermediate sanding, varnish removal, and surface finishing on wood, veneer, varnish, and filler material as well as on mineral and acrylic surfaces. It features a dust container with an integrated Bosch microfilter system and a 125 mm sanding pad with a self-adhesive system.

Includes:

  • 1 Multi-hole sanding sheet
  • Sanding disc (Ø125mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Eccentric Sander

Type

Eccentric Sander

For smoothing curved surfaces with a circular smoothing base.
Power Source
Electric

Power Source

The method of supplying power to the tool.
Power
340 W

Power

Indicates the power of the motor.

Higher power → stronger material removal and more effective sanding, especially on hard materials.
Eccentricity
2.5 mm

Eccentricity: 2.5

Refers to the distance traveled by the rotation of the base/disc from its center (small eccentricity for finishing, large for fast removal).


General sanding, finishing of wood or paint.
Net Weight
2000 gr
Palm Sander
No

Palm Sander

Ergonomic sander that can be easily held by hand, without the need for special support or handles.

Features & Functions

Dust Suction System
Yes

Dust Suction System

Used for collecting residues during the operation of the tool.
Speed Setting
Yes

Speed Setting

Ability to control the rotation speed of the tool.
Turns
12000 rpm

Turns

  • High speeds → fast material removal
  • Low speeds → finer, more controlled finish
Noise
78 dB
Pulses
24000 opm

Pulses

  • High number of strokes → more intense and faster sanding
  • Low number → gentler, suitable for sensitive surfaces
Brushless
No

Brushless

Motor without brushes, offering greater autonomy and longer lifespan.
Water Supply
No
Soft Start
No

Soft Start

Controls the increase in motor speed when the tool is activated. Instead of starting abruptly at maximum speed, the sander gradually increases its speed over 1–2 seconds.
Brake
No

Brake

Immediately stops the disc when the tool is switched off, for safety and easy abrasive change.
Connection with Vacuum
No

Sandpaper / Belt Specifications

Diameter
125 mm
Velcro
No

Velcro

The abrasive pads can be attached with Velcro (hook-and-loop fastener).

Accessories

Carrying Case
Without
Handle Included
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

238,90 €
14,00 €   shipping cost